About the Memphis Audio BR10D4
Add some soul to your sound
Add some soul to your sound
When I think of Memphis, I think of great soul music, and Memphis Audio is all about adding some soul to your car's audio system. Their Bass Reference Series BR10D4 10" subwoofer delivers bass that would make Duck Dunn proud, with a double-stitched surround and woven tinsel leads that help keep the sub kicking when you crank it up. And this sub features a reinforced high-density paper cone that stands up to abuse while punching out powerful, warm, "old school" bass.
Made for ported enclosures
The BR10D4 handles up to 400 watts RMS, so make sure you feed it plenty of power. Memphis Audio designed this sub specifically for ported enclosures to maximize its bass impact, and its dual 4-ohm voice coils allow you to draw maximum power from your mono amp. Just add a nice amp and a ported enclosure, and you've got a recipe for bass heaven.
To drive this single subwoofer, we recommend a mono amplifier rated between 225 and 500 watts at 2 ohms. For more information, please refer to our article on How to Match Subwoofers and Amplifiers.
Product highlights:
- dual 4-ohm voice coil subwoofer
- coated high-density paper cone
- double-stitched foam surround
- power handling: 400 watts RMS (800 watts peak)
- sensitivity: 84 dB
- top-mount depth: 5-1/8"
- designed for ported enclosures
- warranty: 1 year
- Our 60-day money-back guarantee
- MFR # 15-BR10D4
What's in the box:
Memphis Audio BR10D4 owner's manual
- One 10" Dual 4-ohm voice coil woofer
- Removable rubber mounting ring (installed)
- Warranty information
Featured video:
Featured review
Great sound spl and sq for a cheaper sub that's not like the jl audio products! !! That suck for there price no comparison! ! Trust me I've had 3 different brands and the jl w3 blew in 3 weeks.. this sub I just got but it's so smooth and the bass is is also smooth! ! Memphis and pheonix gold!
Dustin from Savannah, GA
12 reasons to shop with us
#12
Trusted since 1974
Here talking gear for many a year.
REVIEWS
Customer reviews
Loading reviews...
Memphis Audio BR10D4 reviews
Average review:
Thanks for submitting your review
Customer photos
More details on the Memphis Audio BR10D4
Features & specs
| Size | 10 -inch | |
| Impedance | Other | |
| Cone Material | Coated High-Density Paper | |
| Surround Material | Foam | |
| Ideal Sealed Box Volume (cubic feet) | 1 | |
| Ideal Ported Box Volume (cubic feet) | 1.3 | |
| Port diameter (inches) | N/A | |
| Port length (inches) | N/A | |
| Free-Air | No | |
| Dual Voice Coil | Yes | |
| Sensitivity |
84 dB at 1 watt | |
| Frequency Response | --- | |
| Max RMS Power Handling | 400 | |
| Peak Power Handling (Watts) | 800 | |
| Top Mount Depth (inches) | 4 15/16 | |
| Bottom Mount Depth (inches) | N/A | |
| Cutout Diameter or Length (inches) | 9 1/8 | |
| Vas (liters) | 18.97 | |
| Fs (Hz) | 33.9 | |
| Qts | 0.661 | |
| Xmax (millimeters) | 12.95 | |
| Parts Warranty | 1 Year | |
| Labor Warranty | 1 Year | |
Product Research
Features
Dual Voice Coils: This woofer features dual 4Ω voice coils, offering wiring flexibility. When the voice coils are wired in parallel, the woofer presents a 2Ω load. When the voice coils are wired in series, the woofer presents an 8Ω load.
Rubber Magnet Boot: A black rubber boot covers the outside edge of the magnet structure to improve the cosmetics of the woofer and protect the magnet during installation. The boot is removable if needed for tight installations.
Sealed Enclosures: Sealed enclosures provide the most control over a woofer and provide accurate sonic reproduction, making them suitable to all types of music. Memphis Audio recommends a sealed enclosure of 1.0 ft³, yielding a -3 dB point of 38 Hz.
Vented Enclosures: Vented (or ported) enclosures typically provide better overall efficiency than sealed so they are suitable for use with smaller amplifiers, giving you more bass output from less power. Memphis Audio recommends a ported enclosure of 1.3 ft³ with a 10-1/2" x 1-1/4" x 17-3/4" slot port, yielding a tuning frequency of 38 Hz and a -3 dB point of 30 Hz.
Loading accessories...
Customer Q&A
Loading articles...
