About the Memphis Audio 15-M610D4
Big bass, Memphis style
Big bass, Memphis styleFrom Elvis to Stax, the "Memphis Sound" has always relied on a foundation of deep, rich bass to tie the music together. Now, Memphis Audio brings that bass tradition to your ride with their M6 Series subwoofers.
Ready to poundMemphis Audio created the M6 Series 15-M610D4 10" subwoofer for high-performance bass reproduction. The fiberglass reinforced cone offers exceptional rigidity so it maintains accuracy at high levels, while its double-stitched rubber surround helps to maximize and control excursion. The vented cast aluminum basket keeps things cool, and virtually eliminates resonances that can color your bass.
Handles plenty of power
The 2.5" voice coils combine with a 120-ounce magnet to handle up to 500 watts RMS, so make sure you feed this sub plenty of power. The dual 4-ohm voice coils allow you to wire the sub for 2 or 8 ohms for system flexibility.
To drive this single subwoofer, we recommend a mono amplifier rated between 375 and 750 watts at 2 ohms. For more information, please refer to our article on How to Match Subwoofers and Amplifiers.
- 10" dual 4-ohm voice coil subwoofer
- fiberglass-reinforced paper cone with double-stitched rubber surround
- cast-aluminum basket
- power handling: 500 watts RMS (1000 watts peak)
- sensitivity: 83 dB
- top-mount depth: 6-3/4"
- grille not included
- warranty: 1 year
- Our 60-day money-back guarantee
- MFR # 15-M610D4
What's in the box:
- One 10" Dual 4-ohm voice coil woofer
- Removable rubber mounting ring (installed)
- Warranty information
Memphis Audio 15-M610D4 reviews
I have two of these in my 2015 Ram 1500 in a FoxBox sub enclosure and these things pound! Worth every penny!
Pros: Hard hitting and clean sound
0 of 0 found this helpful
Great subs hit hard and really clean
0 of 1 found this helpful
Exalent product love the punch at peak power just wish it would hold more RMS I have always went with mimphis because of the exalent quality product hope to see more great stuf from Memphis!!!
Pros: Exalent quality
Cons: To expensive
1 of 5 found this helpful
This sub absolutely pounds!!!! I have it in the back of my 14 Chrysler 300s. My buddy thought I had two of them in the trunk. I have it paired with a jl jx500/1 amp and in a sound ordnance ported box I couldn't be happier. The only thing that I can say negatively about it is it gives off a strong glue/resign smell when playing hard. I listen to a vast array of music from classic rock, metal, Indy, to hip hop and it sounds good with whatever I throw at it. Im thinking of picking up another one with Memphis 1000 watt amp.
Pros: Hard hitting, sounds great, great style and look
Cons: Has glue smell when warms up
2 of 2 found this helpful
More details on the Memphis Audio 15-M610D4
Features & specs
|Impedance||2 ohms or 8 ohms|
|Ideal Sealed Box Volume (cubic feet)||0.75|
|Ideal Ported Box Volume (cubic feet)||1.7|
|Port diameter (inches)||N/A|
|Port length (inches)||N/A|
|Dual Voice Coil||Yes|
83 dB at 1 watt |
|Max RMS Power Handling||500|
|Peak Power Handling (Watts)||1000|
|Top Mount Depth (inches)||6 5/8|
|Bottom Mount Depth (inches)||N/A|
|Cutout Diameter or Length (inches)||9 3/16|
|Parts Warranty||1 Year|
|Labor Warranty||1 Year|
Dual Voice Coils: This woofer features two 4Ω voice coils, allowing impedance flexibility. When the voice coils are wired in parallel, the woofer presents a 2Ω load. When the voice coils are wired in series, the woofer presents an 8Ω load.
Terminals: The two sets of spring post terminals are on the same side of the subwoofer. They will accommodate bare speaker wire up to 10 gauge. They will also accommodate many single banana plugs, but the post is slightly recessed, so some single banana plugs will not fit well. The binding posts are spaced too far apart to accept standard dual banana plugs (¾").
Sealed Box Volume: Memphis Audio recommends a sealed box volume of 0.75 ft³. A sealed enclosure design gives the smoothest response with increased energy at the lowest frequencies.
Ported Box Volume: The recommended ported box volume is 1.7 ft³ with a 10½" x 1¾" x 17¼" slot port; this yields a tuning frequency of 39 Hz. Ported (or vented) enclosures typically provide better overall efficiency than sealed, maximizing bass output for a given amplifier.
2 questions already asked