About the Memphis Audio 15-MCX60
Memphis Audio's MClass Series speakers feature external crossovers for superior sound and a unique mounting system for streamlined installation
Memphis Audio has been making the world of car audio better since 1965, and their MClass Series speakers are the culmination of quality construction, thoughtful design, and years of experience. With a tradition of great American music in mind, Memphis Audio builds these speakers to reproduce every song with authenticity and impressive detail.
Powerful factory replacements
Go ahead and crank the volume — Memphis Audio's 15-MCX60 6-1/2" 2-way car speakers will handle up to 50 watts RMS. Their carbon fiber woofers make powerful replacements for low-functioning factory speakers, delivering strong performance with both accuracy and gusto. The aluminum tweeters give you crisp, soaring highs, and Memphis Audio's ball-and-joint tweeter mounting design allows you to swivel them for more effective dispersal.
You know the MClass speakers are standouts because Memphis Audio equips them with external crossovers with two-level tweeter adjustment for the best sound possible in your car. And thanks to the unique MClip mounting solution, you can securely clip the crossover onto the back of the speaker basket for a space-efficient installation.
- 2-way car speakers (pair)
- 6-1/2" carbon fiber woofer
- aluminum alloy tweeter
- external crossover with two-level tweeter adjustment
- MClip crossover mounting solution for securing crossover to back of speaker basket or to car door
- handles up to 50 watts RMS (100 watts peak power)
- frequency range: 70-20,000 Hz
- sensitivity: 89 dB
- top-mount depth: 2-1/2"
- grilles included
- warranty: 1 year
- Our 60-day money-back guarantee
- MFR # 15-MCX60
What's in the box:
- Two 2-way speakers
- 2 Crossovers
- 2 M-Clip crossover mounting brackets
- 2 Grilles
- Eight 1" Screws
- Eight M4x6mm Machine screws
- 8 Speed clips
- Warranty information
More details on the Memphis Audio 15-MCX60
Features & specs
|Speaker Size||6 1/2 O/S|
|Woofer Composition||Carbon Fiber|
|Parts Warranty||1 Year|
|Labor Warranty||1 Year|
|Sensitivity (1W at 1 meter)||89|
|Sensitivity at 2.83 volts||N/A|
|Frequency Response||70 - 20k Hz|
|Minimum RMS Wattage||---|
|Maximum RMS Wattage||50|
|Peak Power Handling (Watts)||100|
|Top-mount Depth (Inches)||2 9/16|
|Bottom-mount Depth (Inches)||2 3/4|
|Cutout Diameter or Length (inches)||5 9/16|
Tweeters: The aluminum dome tweeters swivel, so they can be aimed for optimum imaging.
Crossover: The crossovers are separate components with the output wires attached. The tweeter output level can be changed from flat to -3 dB by moving a jumper pin inside each crossover. The slope is 12 dB/octave and the crossover point is 5 kHz. The inputs are screw terminals that will accept bare wire or spade connectors up to 0.24" wide. The output wires have quick slides attached that easily connect to the terminals on the speakers (0.110" common -, 0.205" tweeter +, and 0.25" woofer +). The crossover dimensions are:
- Width: 2-3/4"
- Height: 1-1/8"
- Depth: 1-3/4"
M-Clip: The crossovers can be mounted to the back of the speaker magnets, or elsewhere, using the M-Clip brackets. When mounted to the speakers, the crossover adds approximately 1-1/8" to the depth and 1-3/8" to the width of one side of the magnet.
Size Classification Note: Memphis Audio describes this speaker as an oversized 6-1/2". Because it requires a larger cutout than a standard 6-1/2" speaker, Crutchfield has traditionally referred to this size woofer as a 6-3/4". Please enter you vehicle information to confirm fit in your vehicle.