About the Memphis Audio 15-PRX104
Memphis Audio built their Power Reference Series subwoofers to bring some low-frequency punch into your vehicle. The 15-PRX104 10" subwoofer delivers big bass and high output, with a heavy-duty suspension that allows this sub to handle up to 250 watts RMS.
The power of paper
There's a reason that most electric bassists use paper speakers – it sounds warm! Memphis Audio uses a coated paper cone with a double-stitched butyl rubber surround to build a sub that creates classic bass tone while still standing up to the power demands of today's bass-heavy music. The 4-ohm impedance works great when you're bridging an amp or putting together a multi-sub setup.
To drive this single subwoofer, we recommend a mono amplifier rated between 180 and 375 watts at 4 ohms. For more information, please refer to our article on How to Match Subwoofers and Amplifiers.
- 10" 4-ohm subwoofer
- treated paper cone with double-stitched butyl rubber surround
- cast-aluminum basket
- power handling: 250 watts RMS
- peak power handling: 500 watts
- sensitivity: 84 dB
- top-mount depth: 5-3/16"
- grille not included
- warranty: 1 year
- Our 60-day money-back guarantee
- MFR # 15-PRX104
What's in the box:
- One 10" Single voice coil woofer
- Removable rubber mounting ring (installed)
- Owner's manual
Memphis Audio 15-PRX104 reviews
i'm not a guru in sound but it sounds way better than what my local stereo shop installed.
1 of 1 found this helpful
More details on the Memphis Audio 15-PRX104
Features & specs
|Cone Material||Treated Paper|
|Ideal Sealed Box Volume (cubic feet)||0.75|
|Ideal Ported Box Volume (cubic feet)||1.875|
|Port diameter (inches)||N/A|
|Port length (inches)||N/A|
|Dual Voice Coil||No|
83 dB at 1 watt |
|Max RMS Power Handling||250|
|Peak Power Handling (Watts)||500|
|Top Mount Depth (inches)||5 1/4|
|Bottom Mount Depth (inches)||N/A|
|Cutout Diameter or Length (inches)||9 1/4|
|Parts Warranty||1 Year|
|Labor Warranty||1 Year|
Rubber Magnet Boot: A black rubber boot covers the outside edge of the magnet structure to improve the cosmetics of the woofer and protect the magnet during installation. The boot is removable if needed for tight installations. (No change in depth, only magnet diameter.)
Sealed Enclosures: Sealed enclosures provide the most control over a woofer and provide accurate sonic reproduction, making them suitable to all types of music. Memphis Audio recommends a sealed enclosure of 0.75 ft³.
Vented Enclosures: Vented (or ported) enclosures typically provide better overall efficiency than sealed so they are suitable for use with smaller amplifiers, giving you more bass output from less power. Memphis Audio recommends a ported enclosure of 1.875 ft³ with a 10-1/2" x 1-1/2" x 13-1/2" slot port, yielding a tuning frequency of 40 Hz.
Q Crutchfield asked: Why did you buy this?