About the Memphis Audio 15-PRX1244
Low-frequency thunder
Low-frequency thunder
Memphis Audio built their Power Reference Series subwoofers to bring some low-frequency punch into your vehicle. The 15-PRX1244 12" subwoofer delivers big bass and high output, with a heavy-duty suspension that allows this sub to handle up to 300 watts RMS.
The power of paper
There's a reason that most electric bassists use paper speakers – it sounds warm! Memphis Audio uses a coated paper cone with a double-stitched butyl rubber surround to build a sub that creates classic bass tone while still standing up to the power demands of today's bass-heavy music. The dual 4-ohm voice coils allow you to get maximum output from your mono amp.
Product highlights:
- 12" subwoofer with dual 4-ohm voice coils
- treated paper cone with double-stitched butyl rubber surround
- cast-aluminum basket
- power handling: 300 watts RMS
- peak power handling: 600 watts
- sensitivity: 86 dB
- top-mount depth: 5-1/2"
- grille not included
- warranty: 1 year
- Our 60-day money-back guarantee
- MFR # 15-PRX1244
What's in the box:
Memphis Audio 15-PRX1244 owner's manual
- One 12" Dual 4-ohm voice coil woofer
- Removable rubber mounting ring (installed)
- Owner's manual
Scratch & Dent items may be missing non-essential accessories. In some cases the manufacturer's accessories have been replaced with generic equivalents.
See the difference between "Open Box" and "Scratch & Dent" Outlet items
REVIEWS
Customer reviews
Loading reviews...
Memphis Audio 15-PRX1244 reviews
Average review:
Thanks for submitting your review
Customer photos
More details on the Memphis Audio 15-PRX1244

Features & specs
Size | 12 -inch | |
Impedance | 2 ohms | |
Cone Material | Treated Paper | |
Surround Material | Rubber | |
Ideal Sealed Box Volume (cubic feet) | 1.25 | |
Ideal Ported Box Volume (cubic feet) | 3.15 | |
Port diameter (inches) | N/A | |
Port length (inches) | N/A | |
Free-Air | No | |
Dual Voice Coil | Yes | |
Sensitivity |
86 dB at 1 watt | |
Frequency Response | --- | |
Max RMS Power Handling | 300 | |
Peak Power Handling (Watts) | 600 | |
Top Mount Depth (inches) | 5 9/16 | |
Bottom Mount Depth (inches) | N/A | |
Cutout Diameter or Length (inches) | 11 1/16 | |
Vas (liters) | 51.15 | |
Fs (Hz) | 35 | |
Qts | 0.69 | |
Xmax (millimeters) | 13.97 | |
Parts Warranty | 1 Year | |
Labor Warranty | 1 Year |
Product Research
Features
Dual Voice Coils: This woofer features dual 4Ω voice coils to offer wiring flexibility. When the voice coils are wired in parallel, the woofer presents a 2Ω load. When the voice coils are wired in series, the woofer presents an 8Ω load.
Rubber Magnet Boot: A black rubber boot covers the outside edge of the magnet structure to improve the cosmetics of the woofer and protect the magnet during installation. The boot is removable if needed for tight installations. (No change in depth, only magnet diameter.)
Sealed Enclosures: Sealed enclosures provide the most control over a woofer and provide accurate sonic reproduction, making them suitable to all types of music. Memphis Audio recommends a sealed enclosure of 1.25 ft³.
Vented Enclosures: Vented (or ported) enclosures typically provide better overall efficiency than sealed so they are suitable for use with smaller amplifiers, giving you more bass output from less power. Memphis Audio recommends a ported enclosure of 3.15 ft³ with a 12-1/2" x 2-1/2" x 16-1/2" slot port, yielding a tuning frequency of 39 Hz.
Loading accessories...
Customer Q&A
Loading articles...