About the Memphis Audio MJP6C
Pro-level sound
Pro-level sound
Memphis Audio's MOJO Pro Series component speakers sit at the top of the heap, making competition-level audio attainable for you and your most special ride — motorcycles included, thanks to essential water resistance.
Loudness rules
Memphis Audio promises "excruciating levels" of volume, and this system handles up to 125 watts RMS from an outboard amplifier. If that's your thing, the MOJO Pro Series makes loudness your new reality. Memphis Audio's high-efficiency design and top-tier materials maximize sonic output while keeping bulk to a minimum. The included MJPT25 aluminum tweeters really put your highs on full blast, so road noise can't ruin the details in your music. Included crossovers contribute to the impressive low-frequency response of the woofer and to a smooth transition to the pro tweeter.
Product highlights:
- component system includes 2 woofers, 2 tweeters, and 2 external crossovers
- 6-1/2" woofer with accordion cloth surround and billet phase plug
- aluminum dome tweeter
- water-resistant
- handles up to 125 watts RMS (250 watts peak power)
- frequency range: 95-20,000 Hz
- sensitivity: 95 dB
- woofer top-mount depth: 2-3/4"
- grilles included
- warranty: 1 year
- Our 60-day money-back guarantee
- MFR # MJP6C
What's in the box:
Memphis Audio MJP6C owner's manual
- 2 MJP6 Woofers
- 2 MJPT25 Tweeters
- 2 Threaded tweeter trim rings (installed)
- 2 Threaded tweeter mounting collars (installed)
- 2 Crossovers
- 2 Woofer Grilles
- Template
- Specs printed on box
Customer Q&A
Q
The special installation note sends that the tweeters are surface mount. Is there anything included in the package for the tweeter install??
A
Yeah. Top of tweeter unscrews then you tighten it down. Hole needs to be 1"3/4 for tweeter. Box also includes template
12 reasons to shop with us
#8
Hands-on product research
The most accurate info around.
Reviews
Customer reviews
Loading reviews...
Memphis Audio MJP6C reviews
Average review:
Thanks for submitting your review
Customer photos
More details on the Memphis Audio MJP6C
Features & specs
| General | ||
|---|---|---|
| Speaker Size | 6 1/2 | |
| Design | 2-way | |
| Tweeter Design | 1" Bullet Dome | |
| Impedance (Ohms) | 4 | |
| Tweeter Composition | Aluminum | |
| Woofer Composition | Paper | |
| Woofer Surround | Fabric | |
| Parts Warranty | 1 Year | |
| Labor Warranty | 1 Year | |
| Specifications | ||
| Sensitivity (1W at 1 meter) | 95 | |
| Sensitivity at 2.83 volts | N/A | |
| Frequency Response | 95 - 20k Hz | |
| Minimum RMS Wattage | --- | |
| Maximum RMS Wattage | 125 | |
| Peak Power Handling (Watts) | 250 | |
| Top-mount Depth (Inches) | 2 13/16 | |
| Bottom-mount Depth (Inches) | 3 1/8 | |
| Cutout Diameter or Length (inches) | 5 5/8 | |
| Mounting Height (Inches) | 0.295 | |
Product Research
Features
Woofer Size Classification: Memphis Audio describes this woofer as a 6½". Because it requires a larger cutout than a standard 6½" speaker, Crutchfield has traditionally referred to this size speaker as a 6¾". Please enter you vehicle information to confirm fit in your vehicle.
Phase Plug: The phase plug in the center of the woofer ensures a smooth, flat off-axis frequency response by preventing the high frequency sound waves emanating from one side of the cone from interfering with sound waves from the other side of the cone.
Tweeter Mounting: The tweeters are designed to be flush mounted from the bottom, with the mounting surface sandwiched between the included threaded mounting collar and threaded trim ring. The threaded shaft is approximately 1⅛" tall, so the tweeter can be positioned within a range of depth/mounting height combinations.
Tweeter Measurements:
- Required Cutout Diameter: 1.7" (compatible with 1¾" hole saw bit)
- Mounting Depth: 1.75" (minimum) -2.435" (maximum)
- Frame Diameter: 2.287"
- Trim Ring:
- Diameter: 2.237"
- Height: 0.205"
- Mounting Collar:
- Diameter: 2.24"
- Height: 0.195"
Terminals: Both the woofers and tweeters have spring post wire terminals. The woofers' terminals accommodate up to 12-gauge wire and the tweeters' terminals accommodate up to 16-gauge wire.
Crossover: The crossover's inputs and outputs are screw terminals that will accept bare wire or spade connectors up to 0.315" wide.
Crossover Dimensions:
- Width: 3.15"
- Height: 1.17"
- Depth: 2.6"
Loading accessories...
Customer Q&A
2 questions already asked
Loading articles...
