About the Memphis Audio MJPT25
When loud counts
When loud counts
Memphis Audio promises "excruciating levels" of volume from these competition-worthy 1" tweeters with up to 100 watts RMS of power from an outboard amplifier. If that's your thing, the MOJO Pro Series MJPT25 aluminum bullet dome tweeters makes loudness your new reality, thanks to a high-efficiency design and top-tier materials.
Important Note: These tweeters do not include high-pass filters. You'll need a passive or active crossover to use these tweeters in your system.
- 1" aluminum dome tweeters (pair)
- grilles included
- handles up to 100 watts RMS (200 watts peak)
- frequency response: 1,500-20,000
- sensitivity: 105 dB
- top-mount depth: 1-1/2"
- warranty: 1 year
- Our 60-day money-back guarantee
- MFR # MJPT25
What's in the box:
- 2 MJPT25 Tweeters
- 2 Threaded tweeter trim rings (installed)
- 2 Threaded tweeter mounting collars (installed)
- 2 Capacitors
- Specs printed on box
Thanks for submitting your review
More details on the Memphis Audio MJPT25
Features & specs
|Tweeter Design||1" Bullet Dome|
|Parts Warranty||1 Year|
|Labor Warranty||1 Year|
|Sensitivity (1W at 1 meter)||105|
|Sensitivity at 2.83 volts||N/A|
|Frequency Response||1500 - 20k Hz|
|Minimum RMS Wattage||---|
|Maximum RMS Wattage||100|
|Peak Power Handling (Watts)||200|
|Top-mount Depth (Inches)||2 1/2|
|Bottom-mount Depth (Inches)||N/A|
|Cutout Diameter or Length (inches)||1 3/4|
|Mounting Height (Inches)||0.21|
Mounting: The tweeters are designed to be flush mounted from the bottom, with the mounting surface sandwiched between the included threaded mounting collar and threaded trim ring. The threaded shaft is approximately 1⅛" tall, so the tweeter can be positioned within a range of depth/mounting height combinations.
- Required Cutout Diameter: 1.7" (compatible with 1¾" hole saw bit)
- Mounting Depth: 1.75" (minimum) -2.45" (maximum)
- Frame Diameter: 2.287"
- Trim Ring:
- Diameter: 2.237"
- Height: 0.205"
- Mounting Collar:
- Diameter: 2.24"
- Height: 0.195"
Terminals: The tweeters have spring post wire terminals and will accommodate up to 16-gauge wire.
Crossover: The included 3.3 microfarad capacitors are 1st order high pass crossovers (6 dB/octave) and must be used if no other crossovers are added; the crossover point is approximately 12 kHz. One capacitor is wired in-line with the positive input of each speaker.
2 questions already asked