About the Memphis Audio PRX10
Bring clarity back to your music
Bring clarity back to your music
Nothing makes you switch over to talk radio faster than a dull-sounding system in your car. Get the musical detail you need with Memphis Audio's Power Reference Series PRX10 1" tweeters. Memphis includes flush- and surface-mounting hardware so you can get them in the right spot to maximize the soundstage in your car. Memphis also includes external crossovers to ensure that the appropriate frequencies are delivered to these tweeters.
Take advantage of their excellent power handling and drive them with a nice amp. Once you experience the clear highs produced by these 1" polypropylene dome tweeters, you'll rediscover the joy of listening to music in your car.
Installation note: You'll need a pair of our universal backstraps to install these tweeters in the factory locations.
Product highlights:
- 1" polypropylene dome tweeters (pair)
- flush- and surface-mount hardware included
- external crossovers included
- handles up to 50 watts RMS (100 watts peak power)
- frequency response: 3200-20,000 Hz
- sensitivity: 87 dB
- top-mount depth: 7/8"
- warranty: 1 year
- Our 60-day money-back guarantee
- MFR # PRX10
What's in the box:
Memphis Audio PRX10 owner's manual
- 2 Tweeters (with attached 16" wire terminated with quick-slide connectors)
- 2 Crossovers
- 2 Adhesive backed Memphis Audio logos (packaged with the crossovers)
- 2 Flush mount housings (with tweeters installed)
- 2 Flush mount retaining rings
- 2 Angled surface mount housings
- Four 3/4" Flat-head screws
- Tweeter installation instructions
- Warranty information
REVIEWS
Customer reviews
Loading reviews...
Memphis Audio PRX10 reviews
Average review:
Thanks for submitting your review
Customer photos
More details on the Memphis Audio PRX10

Features & specs
General | ||
---|---|---|
Speaker Size | 1 | |
Design | 1-way | |
Tweeter Design | 1" Dome | |
Impedance (Ohms) | 4 | |
Tweeter Composition | Polyropylene | |
Woofer Composition | --- | |
Woofer Surround | --- | |
Parts Warranty | 1 Year | |
Labor Warranty | 1 Year | |
Specifications | ||
Sensitivity (1W at 1 meter) | 87 | |
Sensitivity at 2.83 volts | N/A | |
Frequency Response | 3200 - 20k Hz | |
Minimum RMS Wattage | --- | |
Maximum RMS Wattage | 50 | |
Peak Power Handling (Watts) | 100 | |
Top-mount Depth (Inches) | 0 7/8 | |
Bottom-mount Depth (Inches) | N/A | |
Cutout Diameter or Length (inches) | 1 7/8 | |
Mounting Height (Inches) | 0.207 |
Product Research
Features
Mounting: The tweeters offer multiple mounting options; choose a flush mount, surface mount, or angled surface mount. The tweeters are shipped in the flush mount housings and the angled surface mount housings are included. The back of the flush mount housing and the top of the angled surface mount housing combine to create the (non-angled) surface mount housing. Once installed in any of the housings, the tweeter will pivot slightly to optimize imaging.
Crossover: The crossover's inputs and outputs are screw terminals that will accept bare wire or spade connectors up to 0.315" wide.
Tweeter Dimensions:
Flush Mount | Surface Mount | Angled Surface Mount | |
Mounting Height | 0.207" | 1.044" | 1.605" |
Mounting Depth | 0.855" | screw depth | screw depth |
Frame Diameter | 2.135" | 1.833" | N/A |
Cutout Diameter | 1.839" | N/A | N/A |
Frame Width | N/A | N/A | 1.808" |
Frame Depth | N/A | N/A | 1.838" |
Crossover: The input and output wires are attached to the crossovers. The 70" input wire is terminated with tinned bare wire. The 11" tweeter output wire (labeled HF) is terminated with quick slides to easily connect to the quick slides on the wire attached to the tweeters. Each crossover also has a full range output (labeled LF), 11" wires terminated with quick slides, not crossed over.
Crossover Dimensions:
- Width: 1-7/8"
- Height: 1-1/4"
- Depth: 2-15/16" (4-3/8" including wire)
Loading accessories...
Customer Q&A
1 question already asked
Loading articles...