About the Memphis Audio PRX690C
The time has come to take a stand against disappointing sound, and Memphis Audio's Power Reference Series PRX690C 6"x9" component speaker system is your ally in the quest to bring fun back to your drive. These speakers handle up to 60 watts RMS, and they'll deliver excellent performance, whether you're driving them with a factory stereo or an aftermarket amp.
Memphis supplies logo-stamped grilles if you have plans for a custom installation.
Superior sound staging
Experience the superior sound staging of component polypropylene dome tweeters, which handle detailed delivery of the high frequencies. A polypropylene woofer cone handles the low frequencies, and an external crossover optimizes each driver's performance.
- component speaker system includes two 6"x9" woofers, 2 tweeters, 2 external crossovers
- polypropylene woofer with polyurethane surround
- polypropylene dome tweeter
- 2-way external crossover
- handles up to 60 watts RMS (120 watts peak power)
- frequency response: 51-20,000 Hz
- sensitivity: 90 dB
- woofer top-mount depth: 3- 1/16"
- woofer grilles included
- warranty: 1 year
- Our 60-day money-back guarantee
- MFR # PRX690C
What's in the box:
- 2 Woofers
- 2 Tweeters (with attached 16" wire terminated with quick-slide connectors)
- 2 Crossovers
- 2 Adhesive backed Memphis Audio logos (packaged with the crossovers)
- 2 Woofer grilles
- 2 Flush mount housings (with tweeters installed)
- 2 Flush mount retaining rings
- 2 Angled surface mount housings
- Two 6' Crossover input wires (tinned bare wire on both ends)
- Two 12' Tweeter wires (quick slides on one end and tinned bare wire on the other)
- Two 12' Woofer wires (quick slides on one end and tinned bare wire on the other)
- Eight 1-3/8" Pan head screws
- 8 Speed clips
- Four 3/4" Flat-head screws
- Tweeter installation instructions
- Warranty information
Memphis Audio PRX690C reviews
6x9s work fine, tweeters never made a sound. Bought 8 dollar tweeters locally and hooked them into the crossovers and they've been working fine
Pros: Midrange component works fine
Cons: Cheap tweeters lasted longer than the one day the Memphis tweeters lasted
0 of 1 found this helpful
I have a 2003 jeep grand Cherokee wj with the infinity amp-speaker option. The tweeters did not work any more so I replaced the dash and front doors with these. I used the crossover for the tweeters and they sound a lot better than factory speakers. My next upgrade will be the 6 1/2 in. component for the rear doors
2 of 2 found this helpful
Running just these through a Pioneer head unit and MB Quart amp in the front doors of my 2005 Tacoma, nothing in the rears. Fully impressed by these speakers, the bass you can get from them is fantastic and the separation between frequencies is good as well. Highs fall a little into the background but I have also not zero'd in on my tuning yet.
1 of 1 found this helpful
These are awesome on just the stock head unit but will be powering them soon with 4 channel amp. If you have the basic sound system for Ford F-150 do yourself a favor and buy these.
Pros: Highs and bass
Cons: None so far
1 of 2 found this helpful
Heard a lot about these speakers so I figured I would give them a try. Could not be happier. They sound amazing as I am running a JBL 5 channel amp as well to power these speakers. I would recommend these to anyone.
1 of 1 found this helpful
More details on the Memphis Audio PRX690C
Features & specs
|Tweeter Design||1" Dome|
|Parts Warranty||1 Year|
|Labor Warranty||1 Year|
|Sensitivity (1W at 1 meter)||90|
|Sensitivity at 2.83 volts||N/A|
|Frequency Response||51 - 20k Hz|
|Minimum RMS Wattage||---|
|Maximum RMS Wattage||60|
|Peak Power Handling (Watts)||120|
|Top-mount Depth (Inches)||3 1/16|
|Bottom-mount Depth (Inches)||3 1/2|
|Cutout Diameter or Length (inches)||0|
Tweeter Mounting: The tweeters offer multiple mounting options; choose a flush mount, surface mount, or angled surface mount. The tweeters are shipped in the flush mount housings and the angled surface mount housings are included. The back of the flush mount housing and the top of the angled surface mount housing combine to create the (non-angled) surface mount housing. Once installed in any of the housings, the tweeter will pivot slightly to optimize imaging.
Crossover: The crossover's inputs and outputs are screw terminals that will accept bare wire or spade connectors up to 0.315" wide.
|Flush Mount||Surface Mount||Angled Surface Mount|
|Mounting Depth||0.855"||screw depth||screw depth|
- Width: 2-3/4"
- Height: 1-1/2"
- Depth: 4-3/4"
Q Crutchfield asked: Why did you buy this?
2 questions already asked