About the Memphis Audio VIV1500.1V2
The product of over a half century of technical innovation
The product of over a half century of technical innovation
The folks at Memphis Audio are so proud of these amplifiers, they named the line after the year their company was born — 1965. Looking fine in its brushed anodized aluminum gunmetal chassis, the SixFive Series VIV1500.1V2 mono subwoofer amp can send 1,500 watts RMS to a 1-ohm sub. In addition, this amplifier features onboard digital signal processing — including subsonic and low-pass filtering along with a parametric-style bass boost — that'll help you tune the sound of your bass to perfection. You can even change the color of the amp's illuminated logo and ground caps — select one of the seven available colors to match your mood, whim, or vehicle's interior.
Signal processing for bass
Low-pass and subsonic filters let you tune your sub's sound for supreme clarity and articulation. M-Equalization™ bass enhancement controls (frequency, width, and level) let you add some finely-tuned bass impact to your music. An optional wireless remote lets you control the low-end volume from the driver's seat.
Connectivity and controls
Speaker-level inputs and automatic turn-on circuitry allow you to connect this amp into almost any system, including ones using the factory radio. Preamp outputs can be used to feed another amp its input signal in a multi-amp system. A magnetic cover protects the control panel from dirt and other accidents.
Note: This amplifier's power consumption is beyond the capacity of most automotive electrical systems. To power this amp, your vehicle may require an electrical upgrade that could include a high-output alternator, a second battery, or both.
Product highlights:
- mono subwoofer amplifier
- 375 watts RMS x 1 at 4 ohms (750 watts RMS x 1 at 2 ohms)
- 1,500 watts RMS x 1 at 1 ohm
- Class D amp technology
- frequency response: 10-200 Hz
- digital signal processing:
- variable low-pass filter (50-200 Hz, 48 dB/octave)
- variable subsonic filter (10-80 Hz, 24 dB/octave)
- M-Equalization™ parametric variable bass boost (0-18 dB at 20-80 Hz, 1-5 Q)
- optional wireless remote bass level control available
Other Features:
- preamp inputs and outputs
- speaker-level inputs (require speaker wire to RCA adapters)
- hinged magnetic cover plate conceals top-mounted controls
- 7 color selectable LED logo and ground caps
- 1/0-gauge power and ground leads and a 150-amp fuse recommended — wiring and hardware not included with amplifier
- no onboard fuses — when installing multiple amps in a system, an additional 150-amp in-line fuse between the distribution block and this amplifier is recommended
- dimensions: 10-7/8"W x 2-1/4"H x 8-1/4"D
- warranty: 2 years
- Our 60-day money-back guarantee
- MFR # VIV1500.1V2
REVIEWS
Customer reviews
Loading reviews...
Thanks for submitting your review
Customer photos
More details on the Memphis Audio VIV1500.1V2

Features & specs
Performance | ||
---|---|---|
RMS Power Output (Watts x Channels) |
375 x 1 | |
Peak Power Output (Watts x Channels) | N/A | |
Power at 2 Ohms (Watts x Channels) | 750 x 1 | |
Bridged Power (Watts x Channels) | --- | |
Minimum Impedance Bridged | --- | |
Minimum Impedance Unbridged | 1 | |
Minimum Impedance | 1 | |
Best Frequency Response | 20-200 Hz | |
THD at Rated RMS Power | 1% | |
Signal to Noise Ratio | 95 dB | |
Input Voltage | 14.4v | |
Features | ||
Amplifier Class | D | |
Low-Pass Crossover Frequency | 50-200 Hz | |
Low-Pass Slope (dB/octave) | 48 dB/octave | |
High-Pass Crossover Frequency | N/A | |
High-Pass Slope (dB/octave) | N/A | |
Bass Boost | 0-18 dB | |
Bass Boost Frequency | 20-80 Hz | |
Fan Cooled | No | |
Fuse Rating | 150 | |
Speaker Level Inputs | RCA | |
Preamp Outputs | 1 pair | |
Width (inches) | 10-15/16 | |
Height (inches) | 2-1/4 | |
Depth (inches) | 8-1/4 | |
Parts Warranty | 2 Years | |
Labor Warranty | 2 Years |
Loading accessories...
Customer Q&A
Loading articles...