About the Memphis Audio VIV60C
Uptown component sound
Uptown component sound
Memphis Audio has gone all out with their SixFive Series car speakers, so you can enjoy premium, soulful sound from this classic name in car audio. The Memphis Audio VIV60C 6-1/2" component speaker system includes two woofers for the lower frequencies, two tweeters for the highs, and two external crossovers to ensure those drivers get the right frequencies for optimal performance. And, with this line's focus on quality materials and attention to customization, you'll gain the perfect sound for your vehicle.
Memphis gives you the option to bi-amp this system with these crossovers.
Lush lows and sparkling highs
Each woofer uses a double-layer composite fiber cone for incredible durability and excellent efficiency. A unique silk dome tweeter in an aluminum housing delivers smooth highs accentuated by crisp detail. With power handling up to 80 watts RMS, you'll make the most of this system by driving it with an aftermarket amp. Memphis includes beefy, bi-ampable crossovers with handy tweeter attenuation for sound quality with no compromises.
- component speaker system includes two 6-1/2" woofers, 2 tweeters, 2 external crossovers
- dual layer composite fiber woofer
- silk dome tweeter
- aluminum tweeter housing
- 2-way external crossover with tweeter attenuation
- handles up to 80 watts RMS (160 watts peak power)
- frequency response: 60 - 22,000 Hz
- sensitivity: 90 dB
- woofer top-mount depth: 3"
- woofer grilles included
- warranty: 2 years
- Our 60-day money-back guarantee
- MFR # VIV60C
What's in the box:
- 2 Woofers
- 2 Tweeters (with attached 11" speaker wire)
- 2 Crossovers
- 2 Tweeter flush mount retaining clips
- Two 1/8" Flat-head screws
- Installation instructions
- Warranty information
Memphis Audio VIV60C reviews
Thanks for submitting your review
More details on the Memphis Audio VIV60C
Features & specs
|Speaker Size||6 1/2|
|Woofer Composition||Dual Layer Composite Fiber|
|Parts Warranty||2 Years|
|Labor Warranty||2 Years|
|Sensitivity (1W at 1 meter)||90|
|Sensitivity at 2.83 volts||N/A|
|Frequency Response||60 - 22k Hz|
|Minimum RMS Wattage||---|
|Maximum RMS Wattage||80|
|Peak Power Handling (Watts)||160|
|Top-mount Depth (Inches)||2 15/16|
|Bottom-mount Depth (Inches)||3 1/8|
|Cutout Diameter or Length (inches)||5 11/16|
|Mounting Height (Inches)||0.374|
Woofer Size Classification: While Memphis Audio describes this woofer as a 6-1/2", because it requires a larger cutout than a standard 6-1/2" speaker, Crutchfield has traditionally referred to this size as 6-3/4". Please enter you vehicle information to confirm fit in your vehicle.
Phase Plug: The phase plug in the center of the woofer ensures a smooth, flat off-axis frequency response by preventing the high frequency sound waves emanating from one side of the cone from interfering with sound waves from the other side of the cone.
Terminals: The woofers have set screw terminals that will accept bare wire up to 12-gauge. A 2.5mm Allen wrench (not included) is needed to tighten the terminals.
Tweeter Mounting: The tweeters are mounted in a fixed aluminum housing, designed to flush mount. The retaining clips bolt to the back of the housing and hold the tweeter in place.
- Mounting Height: 0.458"
- Mounting Depth: 0.537"
- Frame Diameter: 2.085"
- Cutout Diameter: 1.747"
Crossover: The crossover's inputs and outputs are set screw terminals that will accept bare wire up to 10-gauge. A switch allows you to change the tweeter output level; choose -3 dB, 0 dB (flat), or +3 dB. Another switch adjusts the Tweeter Shelf, to boost extreme high frequencies. The low pass crossover for the woofer can be set to 6 dB/octave or 12 dB/octave and the crossover point is 4.8 kHz. A 2.5mm Allen wrench (not included) is needed to remove the crossover cover.
- Width: 6-3/8"
- Height: 1-3/4"
- Depth: 3-5/8"
2 questions already asked