About the Memphis Audio VIVREM
Wireless remote control
Wireless remote control
You can control the volume of a Memphis SixFive Series subwoofer amplifier wirelessly from your front seat or dash with the VIVREM remote. It sends its control signal to your sub amp using the reliable 2.4 GHz wireless band, so you won't have to run a wire throughout your vehicle in order to control the level of bass.
Re-chargeable and more
You recharge the VIVREM's battery with the included charging connector either at home or in your car if it has a USB connection available. An LED mirrors the amp's onboard light, indicating power on and protection mode. If your amp does go into thermal protection mode, a push of the VIVREM's knob will reset the amplifier so you can resume playing bass — hopefully at a lower volume.
More than one sub amp?
This wireless remote can control up to four SixFive sub amps at the same time, so if you want to go nuts with bass, be our guest.
- wireless remote level control for Memphis SixFive Series sub amps
- uses 2.4 GHz band wireless connection
- charging connector included
- LED shows amp status: power on, thermal or short protection
- knob pushes in to reset amp from thermal protection mode
- warranty: 2 years
- Our 60-day money-back guarantee
- MFR # VIVREM
What's in the box:
- Wireless remote bass control
- 26" USB charging cable (Type A USB on one end and Mini-B 2.0 USB on other end)
- 28" Hardwiring cable (Mini-B 2.0 USB on one end and bare wire on other end)
- Mounting bracket
- 2 Self-tapping screws (Length 3/8")
More details on the Memphis Audio VIVREM
Overview: The Memphis Car Audio VIVREM wireless bass control is an accessory for select models of the SixFive (VIV) series of power amplifiers. The VIVREM automatically pairs with the amplifier when it powers up. The remote can be mounted horizontally or vertically with the included mounting clip. The dimensions of the VIVREM are: 1.575"W, 1.253"H, 2.53"D.
Compatibility: The VIVREM is compatible with the mono and 5-channel models of the SixFive series amplifiers. This includes the following models: VIV700.1, VIV1100.1, VIV1500.1, VIV2200.1, and VIV900.5 (subwoofer channel only).
Operation: The VIVREM wireless remote has a large 1-1/8" diameter rotary control that lets you adjust the output volume of the paired amplifier. It has a control range (attenuation) of 0dB to -26dB. When the remote is at maximum volume, the amplifier will be at the level set by the Gain Control. As you turn down the volume on the remote, the amplifier's level is attenuated. The rotary knob can be briefly pressed to mute the amplifier, and pressed again to un-mute. The VIVREM uses EEPROM (electronic memory) to save the last volume setting when powering down, and will return to the same volume when powering up. You can clear the volume memory by pressing the button for 5 seconds, resetting the volume to MAX.
LED: The included LED will flash blue as you turn the volume up or down, and glow solid blue when the volume is set to Minimum or Maximum volume. When the amplifier goes into protection, the LED will glow solid red.
Power: The Memphis VIVREM has a built-in rechargeable battery. The battery can be charged in 4 hours via the included USB Mini-B cable, and will provide approximately 3000 hours of battery life. You can also hardwire the VIVREM to avoid having to charge the device. A USB Mini-B hardwire connection is included in the box.
Q Crutchfield asked: Why did you buy this?