Solidsteel VL-4

Features

Solidsteel Philosophy: Solidsteel's philosophy is that there should be no compromise in the build quality or benefits to sonic performance, and that the products should reflect the Italian "style" of design with the use of excellent materials, clean lines, well-considered utilization of space, and attention to detail.

VL Series: The VL Series is designed specifically for the vinyl lover in mind. Whether you already have a large collection of LPs or just beginning your collection, the VL series is the perfect solution. The VL Series rack is designed for essentially accommodating a record collection and a minimal audio system (for example - a turntable and an integrated amplifier, with bookshelf speakers on both sides).

2, 3, or 4 Shelf System: The VL Series rack is available in a 2-shelf, 3-shelf, or 4-shelf configuration. The bottom shelf is dedicated to your vinyl record collection (approximately 120 records), while the upper shelves are designed to hold your audio gear. Each shelf can support up to 264.5 lbs.

• VL-2 (2-Shelf Rack):
  • Top Shelf: 50.375" (w) x 18.8125" (d) x 16.0625" (d)
  • Bottom Shelf: 50.375" (w) x 12.75" (h) x 16.0625" (d)
• VL-3 (3-Shelf Rack):
  • Top Shelf: 50.375" (w) x 28.0" (d) x 16.0625" (d)
  • Middle Shelf: 50.375" (w) x 8.8125" (h) x 16.0625" (d)
  • Bottom Shelf: 50.375" (w) x 12.75" (h) x 16.0625" (d)
• VL-4 (4-Shelf Rack):
  • Top Shelf: 50.375" (w) x 37.6875" (d) x 16.0625" (d)
  • Middle Shelves (2): 50.375" (w) x 8.8125" (h) x 16.0625" (d)
  • Bottom Shelf: 50.375" (w) x 12.75" (h) x 16.0625" (d)

available distances between the lower shelves are 12.75" between the first and second shelf, and 8.8125" for the subsequent shelves.

MDF Shelves: The shelves are made of 0.86"/2mm thick MDF (medium-density fiberboard) covered with high-quality polaymer laminate in a Walnut wood finish. The use of MDF helps to dampen vibration.

6-Pillar Design with Aluminum Construction: The six pillar design is geometrically positioned to give maximum support and minimum physical contact with the surrounding environment. The 6 pillars (poles) are made of painted anodized aluminum and the hardware parts are of AVP iron (galvanized to prevent rust).

Stainless Steel Spikes: Solidsteel's traditional and adjustable stainless steel spikes are included to finely regulate the frame on the ground. The included spikes screw underneath of the audio rack's bottom shelf and pillars (poles). The spike feet provide a solid and secure footprint. All spurious mechanical energies are discharged into the ground through the spike feet at the point where the audio rack's legs contact the floor.

Optional Protective Discs: There are no rubber feet or protective discs included with this audio rack, so be careful not to scratch your hardwood, laminate, tile, and vinyl floors with the spike feet. We recommend you purchase one set of Solidsteel's protective discs (961DISCS4, sold separately) to protect your floors from damage.

Modular Design: Because of its modular design, you can add-on more shelves (sold separately).

• Add-On Audio Shelf: VL Extra Kit 225 (Inner Shelf for additional audio components with height of 8.8125")
  
• Add-On Record Shelf: VL Extra Kit 325 (Inner Shelf for more records with height of 12.75")