Good universal kit
Crutchfield Customer Review (What's this?)
I ordered this for a 2016 Fiat 500x. The kit itself is generic and if mounted as pictured the lower lip on the mount will extend 3 to 3.5" in front of the license plate. I wanted to reverse the mount and have the lip tuck under the front license plate mount. In order to do this I had to cut the lip down and re-drill the holes for the lights to mount in. This was easily done using an angle grinder and cordless drill since the plate is made of mild steel. Since it is a painted finish, touching up the cut and new holes was easy. Once installed, the lights and mounting plate look really good. Modification of the plate and installation (including the wiring) took about 1.5 hours, most of which was spent running the wire from the relay to the dash switch. I used the Race Sport wiring harness and one item to know is the harness has a nice plug for the lights that you will have to cut off as the lights themselves don't have the mating plug. The lights themselves throw a nice fog-light type of beam that lights up the area immediately in front of the car and to the sides and have a reach at least as long as the headlights on low beam. This was exactly what I wanted because the Fiat uses a quasi-projector setup that throws a long-tight beam (like a flashlight) with very little usable light to the sides and directly in front of the car.