ELAC AirX2

Features

Wireless Audio Transmitter: The ELAC AirX²  is a wireless audio transmitter specifically designed for ELAC's Navis powered speakers (sold separately) or ELAC's Muro Series SUB2010/SUB2020 powered subwoofers (sold separately). It allows you to wirelessly transmit an audio signal from an external source device featuring a line-level output to the Navis speakers or wirelessly transmitt a low-frequency audio signal from your AV receiver, integrated amplifier, or surround processor/preamplifier to the ELAC Muro Series powered subs.

• Press and hold the "Wireless Pair" button on the Navis speakers or Muro Series sub until the LED begins to flash rapidly (around 2x per second).
• Press and hold the "Wireless Pair" button on the back of the AirX² wireless transmitter until the wireless pair LED on the Navis speakers or Muro Series sub stops flashing and goes off (no LED means the speaker is wirelessly paired.)

Note: You can connect up to three ELAC Navis powered speakers or Muro Series subs to one AirX²  wireless audio transmitter. 

Stereo RCA Input: The ELAC AirX² wireless audio adapter features a set of stereo analog RCA jacks for connecting your external source device, AV receiver, integrated amplifier, or processor/preamplifier with a variable volume control. No audio cables are included.

Note: The Navis powered speakers do not have a volume control. If connected directly to a fixed output source, the volume will be at maximum level and may damage the speakers and your hearing. Only use AirX² and the Navis speakers with variable output sources and/or a preamplifier.

AC Power: The ELAC AirX²  comes with an AC power adapter which plug into the back of the wireless audio adapter and into an AC power outlet or surge protector (sold separately).