About the PAPAGO TireSafe D10E
Stay on top of your tires
Stay on top of your tires
I'm the worst about checking my tires. PAPAGO knows that I'm not the only one, and their TireSafe D10 wireless tire pressure monitor system offers drivers a simple way to stay on top their tire health. And perfectly inflated tires means less wear and tear, a longer life, and improved fuel efficiency.
How does it work?
To display the TireSafe D10 system's information, you'll need one of PAPAGO's GoSafe S30, 388, 30G, or 760 dash cams mounted in your vehicle. PAPAGO includes everything else you need for a straightforward, quick installation. The TireSafe system uses four waterproof sensors, which are easily affixed onto each tire's air valve in place of the factory cap, to communicate with your dash cam.
Keep an eye on pressure and temperature
Once you start your car and begin driving, the TireSafe D10 system will show you the pressure and temperature of all four tires at once. If tire pressure or temperature is abnormal, onscreen color coding shows you which tire you need to check. PAPAGO also lets you customize your alerts.
- tire pressure and temperature monitoring system
- includes four sensors, and installation tools
- uses PAPAGO's GoSafe S30, 388, 30G, or 760 dash cam (not included) as display unit
- warranty: 1 year
- Our 60-day money-back guarantee
- MFR # GSD10E
What's in the box:
- Tire pressure/temperature receiver (attached 34" minijack cable)
- 4 Tire pressure/temperature sensors
- 4 CR1632 3V batteries
- 5 Hex-nuts
- 4 Silicone rings
- Ring needle
- User's Manual
- Warranty Card
Thanks for submitting your review
More details on the PAPAGO TireSafe D10E
Tire Pressure & Temperature Monitoring System: The PAPAGO! TireSafe D10E (GSD10E) is a tire pressure & temperature monitoring system created to minimize chances of accidents, improve fuel efficiency, lengthen the life of tires, and minimize suspension wear on cars that do not already have a TPMS. The four tire sensors inspect the pressure and temperature of each tire and send the information to the included receiver which plugs into your compatible PAPAGO! Dash Cam (sold separately). When an abnormal change in pressure or temperature occurs, receiver beeps and your Dash Cam's LCD screen specifies which tire is impaired, alerting you to pull over.
Compatibility: The TireSafe D10E (GSD10E) is compatible with 4 different PAPAGO! Dash Cams - including the GoSafe 30G GPS Dash Cam, the GoSafe 760 Dual Dash Cam, the GoSafe 388 Dash Cam, and the GoSafe S30 Dash Cam.
RF Wireless Technology: Empowered by RF wireless technology, the PAPAGO! TireSafe D10E (GSD10E) constantly monitors and displays real time tire pressure and temperature on your compatible PAPAGO! Dash Cam. When the vehicle starts, the four sensors automatically and wirelessly transmit each of the tire's pressures and temperatures to the included receiver which plugs into your compatible PAPAGO! Dash Cam.
IPX 7 Waterproof: TireSafe D10E sensors have an IPX7 waterproof level, meaning it can withstand immersion in water depths equal to 1M place. It's also designed to survive extreme temperature levels, and it passed the real road test challenges, including downpours, so you can rest assured that you'll have the best protection for your traffic safety.
4 Tire Sensors: The TireSafe D10E continuously monitors each tire's pressure and temperature through four sensors and sends the information wirelessly to the included receiver and your compatible PAPAGO! Dash Cam inside the vehicle. One sensor will need to be installed to the valve-stem of each tire (Sensors are labeled "FL", "FR", "RR", and "RL"). You will need to remove the valve-stem cap and replace it with the Sensor using the included hexagon nuts and wrench. Each sensor is powered by a CR1632 3V battery. 4 batteries are included and will need to be installed using the included wrench.
- TPMS Range: 0bar ~ 8bar / 0psi ~ 120psi
- Margin of Error: +/- 0.1 bar / +/-1 psi (Tire Pressure), +/-2° (Tire Temperature)
- Battery Life: 3 years (will vary by vehicle usage)
- Dimensions: 0.875" (diameter) x 0.8125" (deep)
Receiver: The receiver plugs into the 3.5mm jack of your compatible PAPAGO! Dash Cam and installs inside the vehicle with 3M tape. It receives tire pressure and tire temperature information wirelessly for all 4 tires and sends this information to your connected Dash Cam. The receiver will alert you immediately if the pressure or temperature of a tire is abnormal according to the sensors with an audible beep. Your Dash Cam's LCD screen will specify which of the tires is affected.
- Input Voltage: 3.3V
- Dimensions: 1.4375" (w) x 0.5" (h) x 1.6875" (d)
On-Screen Display: Easily view all four tires' pressure and temperature at a glance and be alerted when any tire suffers from an abnormal reading on your compatible PAPAGO! Dash Cam (sold separately). From your Dash Cam, you can quickly adjust the TireSafe D10E's value for minimum tire pressure, maximum tire pressure, and maximum tire temperature alerts. The following color coded warnings are available for each tire.
- White: No signal.
- Green: Tire pressure is normal.
- Blue: Tire temperature is normal.
- Red: Warning, please check tire temperature or pressure.
1 question already asked