Contact us
Close contact box

PAPAGO UDC-US

Hard-wire kit for PAPAGO dash cams

Item # 974UDCUS

PAPAGO's USC-US kit lets you hard wire a PAPAGO dash cam into your vehicle's power system for a permanent installation.

PAPAGO's USC-US kit lets you hard wire a PAPAGO dash cam into your vehicle's power system for a permanent installation.

Need help?
Contact our Virginia-based experts.

Item # 974UDCUS

In stock
$29.99
Add to wishlist

About the PAPAGO UDC-US

Make it permanent

PAPAGO's USC-US kit lets you hard wire a PAPAGO dash cam into your vehicle's power system for a permanent installation.

Make it permanent

PAPAGO's USC-US kit lets you hard wire a PAPAGO dash cam into your vehicle's power system for a permanent installation.

When the USC-US is powered by your vehicle's battery, it will continually supply power to your PAPAGO dash cam to support Monitor, Motion Detector, and Parking Guard mode unless you power off the device. A low-voltage protection circuit design turns off your dash cam so that your vehicle battery cannot be drained enough to prevent you from starting the car. Warranty: 1 year.

READ LESS

What's in the box:

  • Power supply (with attached 57" power/ground wires on one end and 8' miniUSB cable on other end)
  • 4 Self-adhesive clips
  • Instructions on packaging
MFR #UDC-US

Customer reviews

We don't have any reviews, yet.
Submit a review and then enter to win a $350 rewards card.
Be the first to review this product

Loading reviews...

Filter by rating

Customer photos

Sort reviews

Sort by:
Items per page:
View page:

Verified customer (What's this?)
Verified employee purchase (What's this?)

Pros:

Cons:

Crutchfield response

<< >>

More details on the PAPAGO UDC-US

Stacey B.

Product Research

Features

Compatibility: The PAPAGO! hardwire cable kit is compatible with PAPAGO! GoSafe dash cams (sold separately). It plugs into the miniUSB port the GoSafe dash cam.

Hardwire Cable Kit: This hardwire cable kit allows you to connect your compatible PAPAGO! GoSafe dash cam to your vehicle's battery (instead of the vehicle's 12-volt/cigarette lighter socket) in order to use your GoSafe dash cam's Motion Detection & Monitor Mode recording features while the vehicle is parked and turned off.

Intelligent Low Voltage Protection: The hardwire cable kit's Intelligent Low Voltage Protection will cut off the GoSafe dash cam automatically when the battery of your vehicle is getting low.

Specifications:

  • Input Voltage: DC 12V-36V, 1A
  • Output Voltage: DC 5V
  • Output Current: Max 1.8A

Loading accessories...

Customer Q&A

Q
Crutchfield asked: Why did you buy this?
A
Wanted to not use the cig lighter option - it looks so unprofessional. [ ADHAMA  Jul 14, 2017 ]
A
Good price and value [ D Matthew  Feb 16, 2017 ]
A
It's compatible with my S30 dash cam. [ Dan  Sep 01, 2016 ]

3 questions already asked

Q
Can I hardware directly to battery or should I connect to fuse in fuse block. If fuse block, which constant hot is recommended?
[ FLSTSI  Aug 15, 2019 ]
1 answer
A
Connect to the fuse block, check constant hot ( battery power ) with a 12 volt test light. Some block are mark batt with empty slot .
[ JULIO A  Aug 16, 2019 ]
Q
Is this wiring harness compatible with Papago 760?
[ Dennis  Apr 03, 2019 ]
2 answers
A
Yes, this works with that model. I have the exact same one. I only wish the connector were a 90 degree and not straight.
[ Jon  Apr 03, 2019 ]
A
Hard to say since I can't tell fro The photo what the connection is and what the transformer is for. The dashcam Works great and my only complaint is that I Lost the instructions and can't turn off a setting I used to like
[ david  Apr 03, 2019 ]
Q
Will this kit work specificically with the PapaGo GoSafe, MODEL # 535 ?
[ M.  Jun 03, 2018 ]
1 answer
A
Yes, the constant power is an absolute must. 24/7 recording is picture is amazing even in dark garage!
[ DEMETRIUS  Jun 03, 2018 ]

Loading articles...

TOP