About the MATCH UP C42-BMWFRT.3
Custom sound for your BMW
Custom sound for your BMW
If you've been intimidated by the idea of altering your BMW with aftermarket speakers, don't be — MATCH by Audiotec Fischer offers BMW owners a luxurious vehicle-specific solution that doesn't skimp in the power handling department. MATCH's installation is hassle-free, thanks to 4" woofers designed to fit the original mounting position in your doors and 1" silk dome tweeters made for direct-fit installation in your BMW's factory tweeter housing. This 2-way component system offers audio performance that matches the quality you're accustomed to.
What better for your German-engineered car than a German-engineered sound system? MATCH's speakers are precision-built using the latest technology and materials. To minimize distortion, the woofer uses a special magnet structure that efficiently dissipates heat and promotes extreme accuracy. The dome tweeter's coated silk construction brings a natural smoothness to the high frequencies.
MATCH built the compact crossover with a frequency curve and filtering designed specifically for your BMW. MATCH has also given you plenty of leeway in the power department, as these components handle up to 60 watts RMS. You'll be knocked out by the sound of these speakers even if you're powering them with your original BMW radio, but they'll perform on a completely new level when powered by an outboard amp.
Installation note: To ensure that this direct-fit speaker system is compatible with your BMW, please enter your vehicle information or call an Advisor at 1-888-955-6000.
Grilles are not included; as you'll use the factory grilles for this installation.
- component system includes two woofers, two tweeters, and two crossovers
- 4" coated paper woofer with rubber surround
- 1" silk dome tweeter
- separate crossover with 3-level tweeter adjustment
- designed specifically for select BMW models
- works with factory radio, aftermarket receiver, or outboard amp
- handles up to 60 watts RMS power range (120 watts peak)
- frequency response: 100-25,000 Hz
- impedance: 4 ohms
- sensitivity: 90 dB
- grilles not included
- top-mount depth: 3/8" (tweeter), 1-9/16" (woofer)
- warranty: 2 years
- Our 60-day money-back guarantee
- MFR # UP C42-BMWFRT.3
What's in the box:
- 2 UP S4BMW-FRT.3 Woofers
- 2 UP S1BMW-FRT Tweeters (with 31" wires attached)
- 2 Crossovers
- 2 Tweeter brackets
- Instructions (English/ German)
Scratch & Dent items may be missing non-essential accessories. In some cases the manufacturer's accessories have been replaced with generic equivalents.
See the difference between "Open Box" and "Scratch & Dent" Outlet items
Thanks for submitting your review
More details on the MATCH UP C42-BMWFRT.3
Features & specs
|Tweeter Design||1" Dome|
|Woofer Composition||Coated Paper|
|Parts Warranty||2 Years|
|Labor Warranty||2 Years|
|Sensitivity (1W at 1 meter)||90|
|Sensitivity at 2.83 volts||N/A|
|Frequency Response||100 - 25k Hz|
|Minimum RMS Wattage||---|
|Maximum RMS Wattage||60|
|Peak Power Handling (Watts)||120|
|Top-mount Depth (Inches)||1 9/16|
|Bottom-mount Depth (Inches)||1 13/16|
|Cutout Diameter or Length (inches)||3 5/8|
|Mounting Height (Inches)||0.31|
Mounting: The UP S4BMW-FRT.3 woofers included with this system mount easily in place of the factory woofers. The included UP S1BMW-FRT tweeters snap into the BMW factory tweeter housings. If the vehicle didn't originally have separate tweeters, the included tweeter brackets are used and the factory tweeter grille panels must be purchased from BMW. Please enter your vehicle information to confirm fit.
Wiring: The system includes all necessary wiring. Each tweeter has a 31" wire attached that plugs into a port on the crossover. Each crossover has two 10" wires attached; one plugs into a port on the woofer, the other into the harness originally plugged into the factory woofer.
Crossovers: The 12 dB/octave 2-way crossovers are separate components with wiring attached. With the 3-position switch on top of each crossover you can adjust the tweeter output level; choose 0 dB (flat), -3 dB, or -6 dB. If the speakers are powered by a Match DSP amplifier, a jumper setting inside each crossover must be changed.
- Width: 3⅛" (3½" including wire)
- Height: ⅞"
- Depth: 1⅞"