About the MATCH MS 4X-BMW.2
Beef up your BMW's sound
Beef up your BMW's sound
If you've been intimidated by the idea of altering your BMW with aftermarket speakers, don't be. MATCH designed these MS 4X-BMW.2 speakers to fit perfectly in your BMW. Simply unplug your old speakers and remove them, then install these MATCH speakers in their place. You'll still need to splice the included speaker connections with the factory wiring, but the easy fit still cuts installation hassle in half.
A high-quality fit
What better for your German-engineered car than a German-engineered sound system? MATCH's handcrafted speaker design uses the latest technology and materials. To minimize distortion, the woofer features a special magnet structure that efficiently dissipates heat and promotes extreme accuracy. The dome tweeter's coated silk construction brings a natural smoothness to the high frequencies.
MATCH has also given you plenty of leeway in the power department as these speakers handle up to 60 watts RMS. You'll be knocked out by the sound of these speakers even if you're powering them with your original BMW radio, but an external amp will take their performance to a completely new level.
Installation note: To ensure that this direct-fit model is compatible with your BMW, please enter your vehicle information or call an Advisor at 1-888-955-6000.
Grilles are not included; the factory grilles should be suitable for most applications.
- 2-way speakers (pair) with integrated crossovers
- 4" coated paper woofer with rubber surround
- 3/4" silk dome tweeter
- designed specifically for select BMW models
- works with factory radio, aftermarket receiver, or outboard amp
- 2-60 watts RMS power range (120 watts peak)
- frequency response: 100-25,000 Hz
- impedance: 4 ohms
- sensitivity: 90 dB
- grilles not included
- warranty: 2 years
- Our 60-day money-back guarantee
- MFR # MS4X-BMW.2
What's in the box:
- Two 2-way speakers
- Two 7" Lengths of speaker wire with in-line crossovers (each has spade terminals on speaker end and bullet connectors on the other)
- 4 Crimp-on bullet connectors
- Instructions (English/ German)
MATCH MS 4X-BMW.2 reviews
Thanks for submitting your review
More details on the MATCH MS 4X-BMW.2
Features & specs
|Tweeter Design||3/4" Dome|
|Woofer Composition||Coated paper|
|Parts Warranty||2 Years|
|Labor Warranty||2 Years|
|Sensitivity (1W at 1 meter)||90|
|Sensitivity at 2.83 volts||N/A|
|Frequency Response||100 - 25k Hz|
|Minimum RMS Wattage||---|
|Maximum RMS Wattage||60|
|Peak Power Handling (Watts)||120|
|Top-mount Depth (Inches)||1 3/16|
|Bottom-mount Depth (Inches)||1 11/16|
|Cutout Diameter or Length (inches)||3 1/8|
|Mounting Height (Inches)||0.971|
Wiring: While these speakers mount easily in place of the factory speakers, the factory wiring does not plug directly into the new speakers. The factory speaker plug must be removed and the included bullet connectors crimped onto the factory wires, then plugged into the included speaker wire. The other end of the included wire has spade terminals, which are attached to the screw terminals on the MS 4X-BMW.2. There is no provision for reconnecting the factory tweeters (if present).
Crossovers: The included speaker wire has in-line 6 dB/octave crossovers.