About the Helix PP7E Compact Sub

Bass made for the Plug and Play system
Bass made for the Plug and Play system
Helix makes the PP7E subwoofer to deliver great bass when you upgrade your vehicle's factory sound system with a PP50DSP or PP52DSP processor and amplifier. The PP7E rocks with twin 7" subs in a vented enclosure that's compact enough to fit in most vehicles, yet strong enough to broadcast some impressive bass.
Proprietary cable included
The PP7E comes with a 15.75-foot PP-SC4 cable that connects the sub to your PP50DSP or PP52DSP processor. You'll need the cable to connect this enclosure, since its two subs contain four separate voice coils, each powered by its own amp channel in the processor.

The Helix PP7E subwoofer works with the PP50DSP
processor and a vehicle-specific harness (not shown).
Product highlights:
- subwoofer for Helix plug and Play system upgrade
- two 7" DVC 2-ohm subwoofers
- vented enclosure
- includes 15.75-foot (4.8 m.) PP-SC4 cable for connection to PP50DSP
- power handling: up to 200 watts RMS (400 watts peak power)
- sensitivity: 90 dB
- 10-11/16" x 12-1/4" x 11-7/16"
- warranty: 2 years
- Our 60-day money-back guarantee
- MFR # PP7E
What's in the box:
- Ported hatchback style enclosure with two subwoofers installed
- 16' PP-SC 4 cable
- 4 Steel grille rods
Reviews
Customer reviews
Loading reviews...
Helix PP7E Compact Sub reviews
Average review:
Thanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Helix PP7E Compact Sub

Features & specs
General | ||
---|---|---|
Woofer Size (inches) | 7 x 2 | |
Speakers Per Box | --- | |
Woofer Material | Pulp | |
Enclosure Type | Ported | |
Color | Black | |
Pieces in System | 1 | |
Width (inches) | 14-3/16 | |
Height (inches) | 11-1/4 | |
Depth (inches) | 12-1/4 | |
Connector Type | Molex | |
Frequency Response | --- | |
Power Range (Watts RMS) | 200 | |
Maximum Wattage | 400 | |
Sensitivity | 90 dB | |
Impedance | 1 ohm or 4 ohms | |
Parts Warranty | 2 Years | |
Labor Warranty | 2 Years |
Product Research
Features
Overview: The PP 7E subwoofer is designed as an easy addition to the HELIX PP50 DSP plug and play digital signal processor/amplifier. The included PP-SC 4 cable connects the proprietary input terminal on the PP 7E to the subwoofer port on the PP50 DSP. The PP50 DSP powers the PP 7E subwoofer and is required for its use.
Driver Size: HELIX describes the size of the two subwoofers as 7" on their web site and on a sticker on the back of the enclosure. On the packing box they are described as 6-1/2". The speakers' frame diameter is similar to 6-3/4" car speakers.
Impedance: Both subwoofers have dual 2Ω voice coils. Each of the four voice coils is wired separately to the proprietary Molex input terminal.
Loading accessories...
Customer Q&A
2 questions already asked
Loading articles...
I would recommend this to a friend. I purchased the Helix PP50DSP and later added this subwoofer. I had a lot of problems with the PP50DSP, which I wrote about in my review of that item. This subwoofer provides solid punch to the low end.
Rick from Barre, Vermont