About the MATCH UP X4-BMWFRT.3
If you've been intimidated by the idea of altering your BMW with aftermarket speakers, don't be — MATCH by Audiotec Fischer designed these UP X4-BMWFRT.3 speakers to fit perfectly in your BMW. Simply unplug your old speakers and remove them, then install these MATCH speakers in their place. You'll still need to splice the included speaker connections with the factory wiring, but the easy fit still cuts installation hassle in half.
What better for your German-engineered car than a German-engineered sound system? MATCH's handcrafted speaker design uses the latest technology and materials. To minimize distortion, the woofer features a special magnet structure that efficiently dissipates heat and promotes extreme accuracy. The dome tweeter's coated silk construction brings a natural smoothness to the high frequencies.
MATCH has also given you plenty of leeway in the power department as these components handle up to 60 watts RMS. You'll be knocked out by the sound of these speakers even if you're powering them with your original BMW radio, but an external amp will take their performance to a completely new level.
Installation note: To ensure that this direct-fit model is compatible with your BMW, please enter your vehicle information or call an Advisor at 1-888-955-6000.
Grilles are not included; as you'll use the factory grilles for this installation.
- 2-way speakers (pair) with integrated crossovers
- 4" coated paper woofer with rubber surround
- 1/2" silk dome tweeter
- works with factory radio, aftermarket receiver, or outboard amp
- handles up to 60 watts RMS power range (120 watts peak)
- frequency response: 100-25,000 Hz
- impedance: 4 ohms
- sensitivity: 90 dB
- grilles not included
- top-mount depth: 1-9/16"
- warranty: 2 years
- Our 60-day money-back guarantee
- MFR # UP X4-BMWFRT.3
What's in the box:
- Two 2-way speakers
- Two in-line crossovers with plug-and-play BMW harnesses on both ends
- Instruction manual (English/ German)
MATCH UP X4-BMWFRT.3 reviews
Thanks for submitting your review
More details on the MATCH UP X4-BMWFRT.3
Features & specs
|Tweeter Design||1/2" Dome|
|Woofer Composition||Coated Paper|
|Parts Warranty||2 Years|
|Labor Warranty||2 Years|
|Sensitivity (1W at 1 meter)||90|
|Sensitivity at 2.83 volts||N/A|
|Frequency Response||100 - 25k Hz|
|Minimum RMS Wattage||---|
|Maximum RMS Wattage||60|
|Peak Power Handling (Watts)||120|
|Top-mount Depth (Inches)||1 9/16|
|Bottom-mount Depth (Inches)||1 13/16|
|Cutout Diameter or Length (inches)||3 5/8|
|Mounting Height (Inches)||0.351|
Mounting: The UP X4BMW-FRT.3 speakers are a direct replacement for the factory speakers in select BMW and Mini models. Please enter your vehicle information to confirm fit.
Wiring: These speakers have the same plug as the factory speakers, so the factory harness plugs directly into the new speaker. If the factory radio/amp is used to power the speakers, the included in-line crossovers must be used. The crossover wires also have BMW plugs on both ends, so no splicing is necessary; the crossovers will simply plug in.
Crossovers: The tweeters' high-pass crossovers are integrated into the speakers. The separate in-line high-pass crossovers are used if the factory amp is used to power the speaker. No crossover point is given for either crossover, but both are 6 dB/octave. When using an aftermarket DSP/Amp, the crossover should be set to 120 Hz and 24 dB/octave.