About the MATCH UP X4-BMWCTR.3
Improve that essential speaker
Improve that essential speaker
If you've been intimidated by the idea of altering your BMW with aftermarket speakers, don't be — MATCH by Audiotec Fischer designed this UP X4-BMWCTR.3 coaxial speaker to fit perfectly in your BMW's center dash location. Simply unplug your old speaker and remove it, then install this MATCH speaker in its place. You'll still need to splice the included speaker connection with the factory wiring, but the easy fit cuts installation hassle in half. This speaker delivers a dramatic boost in clarity and staging for the underappreciated audio channeled through this center location.
German quality
What better for your German-engineered car than a German-engineered sound system? MATCH's handcrafted speaker design uses the latest technology and materials. To minimize distortion, the woofer features a special magnet structure that efficiently dissipates heat and promotes extreme accuracy. The dome tweeter's coated silk construction brings a natural smoothness to the high frequencies.
MATCH has also given you plenty of leeway in the power department as these components handle up to 60 watts RMS. You'll be knocked out by the sound of these speakers even if you're powering them with your original BMW radio, but an external amp will take their performance to a completely new level.
Installation note: To ensure that this direct-fit model is compatible with your BMW, please enter your vehicle information or call an Advisor at 1-888-955-6000.
Grilles are not included; the factory grilles should be suitable for most applications.
Highlights:
- 2-way speakers with integrated crossover
- 4" coated paper woofer with rubber surround
- 1/2" silk dome tweeter
- works with factory radio, aftermarket receiver, or outboard amp
- handles up to 60 watts RMS power range (120 watts peak)
- frequency response: 100-25,000 Hz
- impedance: 4 ohms
- sensitivity: 90 dB
- grille not included
- top-mount depth: 1-9/16"
- warranty: 2 years
- Our 60-day money-back guarantee
- MFR # UP X4-BMW-CRT.3
What's in the box:
MATCH UP X4-BMWCTR.3 owner's manual
- One 2-way speaker
- in-line crossover with plug-and-play BMW harnesses on both ends
- Instruction manual (English/ German)
Reviews
Customer reviews
Loading reviews...
MATCH UP X4-BMWCTR.3 reviews
Average review:
Thanks for submitting your review
Customer photos
More details on the MATCH UP X4-BMWCTR.3
Features & specs
| General | ||
|---|---|---|
| Speaker Size | Vehicle-specific | |
| Design | 2-way | |
| Tweeter Design | 1/2" Dome | |
| Impedance (Ohms) | 4 | |
| Tweeter Composition | Silk | |
| Woofer Composition | Coated Paper | |
| Woofer Surround | Rubber | |
| Parts Warranty | 2 Years | |
| Labor Warranty | 2 Years | |
| Specifications | ||
| Sensitivity (1W at 1 meter) | 90 | |
| Sensitivity at 2.83 volts | N/A | |
| Frequency Response | 100 - 25k Hz | |
| Minimum RMS Wattage | --- | |
| Maximum RMS Wattage | 60 | |
| Peak Power Handling (Watts) | 120 | |
| Top-mount Depth (Inches) | 1 9/16 | |
| Bottom-mount Depth (Inches) | 1 13/16 | |
| Cutout Diameter or Length (inches) | 3 5/8 | |
| Mounting Height (Inches) | 0.351 | |
Product Research
Features
Mounting: The UP X4BMW-CTR.3 speaker is a direct replacement for the factory center speaker in select BMW and Mini models. Please enter your vehicle information to confirm fit.
Wiring: This speaker has the same plug as the factory speaker, so the factory harness plugs directly into the new speaker. If the factory radio/amp is used to power the speaker, the included in-line crossover must be used. The crossover wire also has BMW plugs on both ends, so no splicing is necessary; the crossover will simply plug in.
Crossovers: The tweeter's high-pass crossover is integrated into the speaker. The separate in-line high-pass crossover is used if the factory amp is used to power the speaker. No crossover point is given for either crossover, but both are 6 dB/octave. When using an aftermarket DSP/Amp, the crossover should be set to 120 Hz and 24 dB/octave.
Loading accessories...
Customer Q&A
1 question already asked
Loading articles...
