About the Atlas WMA 16-23
Wall-mount your pro audio gear
Not much floor space available for gear? No problem. The Atlas WMA 16-23 lets you wall-mount pro audio components, and keeps equipment and cables organized and accessible. The cabinet is made from 16-gauge steel and braced internally so your valuable gear stays safe and stable after you install it. Perforated side vents keep air circulating so everything stays cool, as well. Keep cable runs neat and tidy with internal wire management guides and 32 conduit knockouts on the back pan.
- panel space openings range from 10 to 35 rack units (RU)
- 18" deep center section
- adjustable front rack rails with securing holes for fixed positioning
- cutout on back pan allows easy cable access
- 32 conduit knock outs:
- 16 in top rear section
- 16 in bottom rear section
- perforated vents provide ventilation for rack-mounted electronics
- internal alignment frame supports center section of the cabinet
- door shown in photo is an optional accessory
- 21-7/8"W x 33-3/4"H x 23-1/2"D
- weight: 121 lbs.
- warranty: 5 years
- Our 60-day money-back guarantee
- MFR # WMA16-23
What's in the box:
- Rack cabinet
- Rear back pan
- 2 Rack rails
- Rack screws & captive washers
- Hinge pins
Thanks for submitting your review
More details on the Atlas WMA 16-23
Construction: The Atlas WMA1623 16RU (Rack Units) wall cabinet is constructed of 16ga. Cold Rolled Steel (CRS) that's welded together and finished in black electrostatic powder-coating, providing long-lasting durability and aesthetics. The WMA1623 features adjustable rack rails, that are tapped 10-32 with standard E.I.A. 1/2" spacing, for mounting 19" wide electronic equipment. Hat channels provide adjustable rack rail support with securing holes for fixed positioning of the rails. The Atlas wall cabinet provides 16RU of vertical mounting space for equipment, and can support up to 200 lbs. The hinged wall cabinet is strengthened with an internal alignment frame that supports the center section of the cabinet through its entire travel range.
Mounting: The WMA1623 is comprised of 2 parts; an 18" deep center section and a 4-1/2" deep rear section that mount together on hinges for easy access to the back of installed equipment. This also facilitates easy wall-mounting, with the rear section mounting to the wall and the center section attaching to the hinges. A 12.5" x 12.5" cut-out on the rear section allows for cable access through the mounting surface.
Conduit Knockouts: The rear section of the wall cabinet includes 16 conduit knockouts on both the top and bottom. Knockouts include; Two 1/2" standard, three 1" x 1-3/8" concentric, and four 1/2" x 3/4" concentric.
Ventilation: Perforated vents on both sides of the cabinet, and along the front top and bottom provide ventilation for installed equipment. Top and bottom 3RU cutouts, with installed blank plates, can accommodate an optional Atlas ES Series single or dual fan (sold separately), for added air circulation.
Security: The rear section of the wall cabinet includes an interchangeable Right- or Left-side lock cylinder for securing your equipment.