Position your TV for optimal viewing with the Secura QLF214 full-motion wall mount. The hinged arm swings out to extend your TV up to 14-1/4" from the wall. The mount can be swiveled from side to side, and tilted up or down. After installation, the mount's "roll" adjustment lets you fine-tune your TV's position to ensure that it's level. And installation is a simple three-step process: Mount the wall plate to a wall stud, attach the brackets to the back of your TV, then lock them into place on the wall plate.
Product highlights:
- designed for TVs 40"-70"
- supports up to 100 lbs.
- pivoting arm extends TV up to 14-1/4" away from the wall
- tilt range: +5° to -15° (may vary with size of TV)
- roll adjustment: +3° to -3°
- swivel range: ±33°
- brackets lock onto wall plate for simple installation
- stud-mounting required
- UL-certified for safe mounting and structural integrity
- 24-15/16"W x 16-1/2"H x 3-1/4"D (up to 14-1/4" with arm extended)
- warranty: 5 years
- Our 60-day money-back guarantee
- MFR # QLF214-B2
What's in the box:
- Wall-plate w/ extension arm
- 2 TV brackets (w/ locking screws)
- Four M6x12mm screws
- Four M6x35mm screws
- Four M8x16mm screws
- Four M8x20mm screws
- Four M8x35mm screws
- Three 5/16"x2-3/4" lag-bolts
- Three 3/4" washers
- Four M6/M8 washers
- Four 22mm spacers
- 3 Concrete anchors
- Hex-key
- Instruction Manual
- Warranty Information
Featured review
Very straight forward mounting and good adjustment. Had a 60" tv mounted and it made out fine after the 7.0 quake we had.
Terry from Wasilla, AK
12 reasons to shop with us
Reason #4
We've got your back with 60-day returns
(We want to make sure you love it!)
REVIEWS
Customer reviews
Loading reviews...
Secura QLF214 reviews
Average review:
Customer photos
Solid well built articulating VESA mount.
Crutchfield customer from Tucson, AZ on 5/2/2019
I did my research, rightfully so - this mounting bracket does EVERYTHING I needed it to do. Solid material, no fears that my TV will come crashing to the floor. However, my Samsung 4K LED TV 65" upper rear VESA screw holes were deeper than the longest screws provided by MFG. I had the same issues with Samsung parts packaging when I was using the wishbone stand. ACE hardware had the screws needed.
Pros:
Cons:
0 of 0 found this helpful
Secura QLF214
Terry from Wasilla, AK on 12/2/2018
Very straight forward mounting and good adjustment. Had a 60" tv mounted and it made out fine after the 7.0 quake we had.
Pros: Earthquake proof
Cons: None
0 of 0 found this helpful
Secura QLF214
Michael from Sylmar, CA on 11/25/2018
I used it to mount Samsung 65" LED that I bought from Costco several years ago. The instructions were very clear and the installation was easy. What might be a drawback for some is adjusting the tilt on this mount. You need to use an allen wrench, which is included with the hardware.
Pros:
Cons:
0 of 0 found this helpful
Secura QLF214
Crutchfield customer from West Lebanon, IN on 10/28/2018
I was very impressed because the hardware was extremely easy to install.
Pros:
Cons:
0 of 0 found this helpful
Secura QLF214
Crutchfield customer from Little Rock, AR on 11/27/2017
0 of 0 found this helpful
Secura QLF214
Crutchfield customer from Gardnerville, NV on 7/27/2017
0 of 0 found this helpful
Secura QLF214
Crutchfield customer from Monroe, NY on 12/18/2016
Well made, strong, though a bit heavy. Put it up without issue, and hold my 60 in TV. Rotation is easy and smooth. With the tilt could be adjusted without use of a wrench. Al in all, very pleased and highly recommended.
Pros:
Cons:
0 of 0 found this helpful
Secura QLF214
Crutchfield customer from Wilson nc on 9/26/2016
0 of 0 found this helpful
More details on the Secura QLF214
Product Research
Features
TV Compatibility: The Secura QLF214-B2 is a full-motion wall-mount bracket for 40"-70" flat-panel TVs up to 100 lbs.
VESA Pattern: The Secura QLF214-B2 features universal mounting brackets to accommodate horizontal hole spacing on back of TVs of 100mm-600mm and a vertical hole spacing of 100mm-400mm. It will accommodate the following VESA hole patterns in accordance with industry standards set by the Video Electronics Standards Association.
- 100 x 100
- 200 x 100
- 200 x 200
- 300 x 200
- 300 x 300
- 400 x 200
- 400 x 300
- 400 x 400
- 600 x 400
M6/M8 Mounting Hardware: The Sanus QLF214-B2 comes with M6 and M8 size bolts of differing lengths to mount the bracket to your TV. Additional hardware may be required for your specific model of TV. For example; shorter or longer screws, thicker or slimmer washers or spacers. These additional accessories can often be found at your local hardware store.
Construction: The Secura QLF214-B2 wall-mount bracket is constructed of heavy-gauge steel with a durable powder-coated black finish. This solid construction provides strength and increased safety.
Full-Motion Design: The QLF214-B2 extends from the wall (3.25"-14.25"), tilts up/down (+5°/-15°), swivels left or right (+/-33°), and rolls (+3°/-3°) for easy viewing anywhere in the room.
Installation Tools: The following tools are recommended for mounting the QLF214-B2:
- Tape measure
- Pencil
- Stud finder
- Level
- Awl
- Drill
- 7/32" Drill bit (for wood stud)
- 3/8" Masonry bit (for concrete block)
- 1/2" Socket wrench
- Phillips-head Screwdriver
- Hammer
Loading accessories...
Customer Q&A
Q Crutchfield asked: Why did you buy this?
1 question already asked
Loading articles...
