About the Secura QLT25
The Secura QLT25 holds your TV 1-1/4" from the wall and lets you tilt it forward to one of three positions to optimize the viewing angle and reduce glare. Installation is a simple three-step process: Mount the wall plate to a wall stud, attach the brackets to the back of your TV, then lock them into place on the wall plate. Quick release straps that hang behind the TV make it easy to disconnect it from the wall plate.
Product highlights:
- designed for TVs 40"-70"
- supports up to 110 lbs.
- 3 fixed tilt positions: -5°, -8°, -10°
- brackets lock onto wall plate for simple installation
- stud-mounting required
- quick release locking system
- UL-certified for safe mounting and structural integrity
- 25-5/8"W x 16-15/16"H x 1-1/4"D
- warranty: 5 years
- Our 60-day money-back guarantee
- MFR # QLT25-B2
What's in the box:
- Wall-plate
- 2 TV brackets
- Four M6x12mm screws
- Four M6x35mm screws
- Four M8x16mm screws
- Four M8x20mm screws
- Four M8x35mm screws
- Two 5/16"x2-3/4" lag-bolts
- Two 0.75" washers
- Four M6/M8 washers
- Four 22mm spacers
- 2 Concrete anchors
- Instruction Manual
- Warranty Information
Reviews
Customer reviews
Loading reviews...
Secura QLT25 reviews
Average review:
Thanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Secura QLT25
Features & specs
| Features | ||
|---|---|---|
| Mount Type | Tilt | |
| Motion | ||
| Tilt | No | |
| Swivel | No | |
| Extend/Retract | No | |
| Fixed | No | |
| Roll (Level) Adjustment | No | |
| Mounting Details | ||
| Wood Stud (Single) | No | |
| Wood Stud (Dual, 16-inch) | No | |
| Wood Stud (Dual, 24-inch) | No | |
| Concrete Block-compatible | No | |
| Recessed Housing | No | |
| Outdoor-rated | No | |
| Motorized | No | |
Product Research
Features
TV Compatibility: The Secura QLT25-B2 is a 3-position tilt wall-mount bracket for 40"-70" flat-panel TVs up to 110 lbs.
VESA Pattern: The Secura QLT25-B2 features universal mounting brackets to accommodate horizontal hole spacing on back of TVs of 100mm-600mm and a vertical hole spacing of 100mm-400mm. It will accommodate the following VESA hole patterns in accordance with industry standards set by the Video Electronics Standards Association.
- 100 x 100
- 200 x 100
- 200 x 200
- 300 x 200
- 300 x 300
- 400 x 200
- 400 x 300
- 400 x 400
- 600 x 400
M6/M8 Mounting Hardware: The Sanus QLT25-B2 comes with M6 and M8 size bolts of differing lengths to mount the bracket to your TV. Additional hardware may be required for your specific model of TV. For example; shorter or longer screws, thicker or slimmer washers or spacers. These additional accessories can often be found at your local hardware store.
Construction: The Secura QLT25-B2 wall-mount bracket is constructed of heavy-gauge steel with a durable powder-coated black finish. This solid construction provides strength and increased safety.
3 Fixed Titling Positions: The Sanus QLT25-B2 offers three fixed tilting positions for an ideal viewing angle (-5°/-8°/-10°) when your TV is mounted high on the wall. You can also position the QLT25-B2 bracket parallel to the wall which places your television only 1.25" from wall surface.
Note: The QLT25-B2's TV bracket and your TV must be removed from the wall-plate to reposition the TV bracket and your TV for tilting or low-profile positioning.
Center TV Quickly: Your TV can slide from side-to-side on the QLT25-B2 wall-mount for perfect positioning on the wall. The TV brackets easily shift left and right on the wall plate to allow perfect TV placement, even with off-center wall studs.
Quick-Releasing Locking System: A quick-release locking system secures your TV to the QLT25-B2's wall-mount plate. Once the wall-plate is anchored to the wall studs and the two TV brackets are attached to the back of your television, the two TV brackets hook and click into the wall-plate. There is a strap on each TV bracket which allows you to remove the brackets and your television from the wall-plate.
Installation Tools: The following tools are recommended for mounting the QLT25-B2:
- Tape measure
- Pencil
- Stud finder
- Level
- Awl
- Drill
- 7/32" Drill bit (for wood stud)
- 3/8" Masonry bit (for concrete block)
- 1/2" Socket wrench
- Phillips-head Screwdriver
- Hammer
Loading accessories...
Customer Q&A
1 question already asked
Loading articles...
