About the Secura QML22
The low-profile Secura QML22 mount is a budget-friendly option for mounting your small to medium-sized TV safely and securely." It holds your display only 1-1/4" from the wall. And installation is a simple three-step process: Mount the wall plate to wall studs, attach the brackets to the back of your TV, then lock them into place on the wall plate. The mount will make an audible click when the brackets are in place, ensuring a secure fit. Quick release straps that hang behind the TV make it easy to disconnect it from the wall plate.
- designed for TVs 32"-50"
- supports up to 50 lbs.
- mount holds TV approximately 1-1/4" from wall
- stud-mounting required
- quick release locking system
- movable brackets for off-center stud placement
- UL-certified for safe mounting and structural integrity
- brackets: 17-3/4"W x 2-3/8"H x 1-1/4"D
- warranty: 5 years
- Our 60-day money-back guarantee
- MFR # QML22-B2
What's in the box:
- 2 TV brackets
- 2 TV/Wall stops
- Four M4x12mm screws
- Four M4x35mm screws
- Four M6x12mm screws
- Four M6x35mm screws
- Four M8x16mm screws
- Four M8x20mm screws
- Four M8x35mm screws
- Two 5/16"x2-3/4" lag-bolts
- Two 5/16" washers
- Four M4 washers
- Four M6/M8 washers
- Four 22mm spacers
- 2 Concrete anchors
- Instruction Manual
- Warranty Information
More details on the Secura QML22
TV Compatibility: The Secura QML22-B2 is a low-profile wall-mount bracket for 32"-50" flat-panel TVs up to 50 lbs.
VESA Pattern: The Secura QML22-B2 features universal mounting brackets to accommodate horizontal hole spacing on back of TVs of 100mm-400mm and a vertical hole spacing of 100mm-400mm. It will accommodate the following VESA hole patterns in accordance with industry standards set by the Video Electronics Standards Association.
- 100 x 100
- 200 x 100
- 200 x 200
- 300 x 200
- 300 x 300
- 400 x 200
- 400 x 300
- 400 x 400
Note: The included TV brackets screws into the top of mounting holes of your TV, while the included back-stops are screwed into your TV's bottom mounting holes.
M4/M6/M8 Mounting Hardware: The Sanus QML22-B2 comes with M4, M6, and M8 size bolts of differing lengths to mount the bracket to your TV. Additional hardware may be required for your specific model of TV. For example; shorter or longer screws, thicker or slimmer washers or spacers. These additional accessories can often be found at your local hardware store.
Construction: The Secura QML22-B2 wall-mount bracket is constructed of heavy-gauge steel with a durable powder-coated black finish. This solid construction provides strength and increased safety.
Low-Profile Design: A slim, low-profile design positions your flat-panel TV just 1.25" from the wall for a super thin look.
Center TV Quickly: Your TV can slide from side-to-side on the QML22-B2 wall-mount for perfect positioning on the wall. The TV brackets easily shift left and right on the wall plate to allow perfect TV placement, even with off-center wall studs.
Quick-Releasing Locking System: A quick-release locking system secures your TV to the QML22-B2's wall-mount plate. Once the wall-plate is anchored to the wall studs and the two TV brackets are attached to the back of your television, the two TV brackets hook and click into the wall-plate. There is a strap on each TV bracket which allows you to remove the brackets and your television from the wall-plate.
Installation Tools: The following tools are recommended for mounting the QML22-B2:
- Tape measure
- Stud finder
- 7/32" Drill bit (for wood stud)
- 3/8" Masonry bit (for concrete block)
- 1/2" Socket wrench
- Phillips-head Screwdriver
Q Crutchfield asked: Why did you buy this?