About the Secura QMT25
The Secura QMT25 mount holds your TV 1-1/4" from the wall and lets you tilt it forward to one of three positions to optimize the viewing angle and reduce glare. Installation is a simple three-step process: Mount the wall plate to a wall stud, attach the brackets to the back of your TV, then lock them into place on the wall plate. Quick release straps that hang behind the TV make it easy to disconnect it from the wall plate.
- designed for TVs 32"-50"
- supports up to 50 lbs.
- 3 fixed tilt positions: -5°, -8°, -10°
- brackets lock onto wall plate for simple installation
- stud-mounting required
- UL-certified for safe mounting and structural integrity
- 17-1/8"W x 16-15/16"H x 1-1/4"D
- warranty: 5 years
- Our 60-day money-back guarantee
- MFR # QMT25-B2
What's in the box:
- TV bracket
- Four M4x12mm screws
- Four M4x35mm screws
- Four M6x12mm screws
- Four M6x14mm screws
- Four M6x35mm screws
- Four M8x16mm screws
- Four M8x20mm screws
- Four M8x35mm screws
- Two 5/16"x2-3/4" lag-bolts
- Two 5/16" washers
- Four M4 washers
- Four M6/M8 washers
- Four M6 nuts
- Four 22mm spacers
- 2 Concrete anchors
- Instruction Manual
- Warranty Information
Secura QMT25 reviews
Great product as I now use three of them to hold my TVs. It's easy to install and secure. I would recommend this to others for sure.
Pros: Easy to install.
0 of 0 found this helpful
More details on the Secura QMT25
TV Compatibility: The Secura QMT25-B2 is a 3-position tilt wall-mount bracket for 32"-50" flat-panel TVs up to 50 lbs.
VESA Pattern: The Secura QMT25-B2 features universal mounting brackets to accommodate horizontal hole spacing on back of TVs of 75mm-200mm and a vertical hole spacing of 75mm-200mm. It will accommodate the following VESA hole patterns in accordance with industry standards set by the Video Electronics Standards Association.
- 100 x 100
- 200 x 100
- 200 x 200
- 300 x 200
- 300 x 300
- 400 x 200
- 400 x 300
- 400 x 400
M4/M6/M8 Mounting Hardware: The Sanus QMT25-B2 comes with M4, M6, and M8 size bolts of differing lengths to mount the bracket to your TV. Additional hardware may be required for your specific model of TV. For example; shorter or longer screws, thicker or slimmer washers or spacers. These additional accessories can often be found at your local hardware store.
Construction: The Secura QMT25-B2 wall-mount bracket is constructed of heavy-gauge steel with a durable powder-coated black finish. This solid construction provides strength and increased safety.
3 Fixed Titling Positions: The Sanus QMT25-B2 offers three fixed tilting positions for an ideal viewing angle (-5°/-8°/-10°) when your TV is mounted high on the wall. You can also position the QMT25-B2 bracket parallel to the wall which places your television only 1.125" from wall surface.
Note: The QMT25-B2's TV bracket and your TV must be removed from the wall-plate to reposition the TV bracket and your TV for tilting or low-profile positioning.
Quick-Releasing Locking System: A quick-release locking system secures your TV to the QMT25-B2's wall-mount plate. Once the wall-plate is anchored to the wall studs and the two TV brackets are attached to the back of your television, the two TV brackets hook and click into the wall-plate. There is a strap on each TV bracket which allows you to remove the brackets and your television from the wall-plate.
Cable Management: The QMT25-B2's open wall-plate design provides generous space for cable & wire management behind your TV.
Installation Tools: The following tools are recommended for mounting the QMT25-B2:
- Tape measure
- Stud finder
- 7/32" Drill bit (for wood stud)
- 3/8" Masonry bit (for concrete block)
- 1/2" Socket wrench
- Phillips-head Screwdriver
Q Crutchfield asked: Why did you buy this?