About the Secura QMT35
Reduce glare and reflection
Reduce glare and reflection
The Secura QMT35 lets you tilt your TV up or down to optimize your viewing angle. The mount can support TVs 32" to 50" and weighing up to 50 lbs.
Simple installation
Installation is a simple three-step process. Mount the wall plate to wall studs, attach the brackets to the back of your TV, then hang the TV on the wall plate. The mount will make an audible click when the brackets lock in place, ensuring a secure fit.
After mounting, you can shift your TV slightly to the right or left for proper positioning. Quick release straps that hang behind the TV make it easy to disconnect it from the wall plate.
Product highlights:
- designed for TVs 32"-50"
- supports up to 50 lbs.
- fits VESA mounting hole patterns from 100 x 100mm to 400 x 400mm
- mount holds TV approximately 2-1/8" from wall
- tilt range: +5° to -10°
- stud-mounting required
- quick release locking system
- movable brackets for off-center stud placement
- 19-1/8"W x 16-5/8"H x 2-1/8"D
- warranty: 5 years
- Our 60-day money-back guarantee
- MFR # QMT35-B2
What's in the box:
- 2 TV brackets
- Wall-plate
- Four M4x12mm screws
- Four M4x35mm screws
- Four M6x12mm screws
- Four M6x35mm screws
- Four M8x16mm screws
- Four M8x25mm screws
- Four M8x35mm screws
- Four M8x50mm screws
- Four 1/4" x 2-3/4" lag-bolts
- Four M4 washers
- Four M6/M8 washers
- Four 1/4" washers
- Four 2.5mm spacers
- Four 22mm spacers
- 4 Concrete anchors
- Instruction Manual
- Warranty Information
REVIEWS
Customer reviews
Loading reviews...
Thanks for submitting your review
Customer photos
More details on the Secura QMT35

Product Research
Features
TV Compatibility: The Secura QMT35-B2 is a tilting wall-mount bracket for 32"-50" flat-panel TVs up to 50 lbs. The TV must meet the following VESA and screw size requirements.
- VESA Sizes: 100x100 to 400x400
- Screw Size: M4, M6, or M8
Note: Additional hardware may be required for your specific model of TV. For example; shorter or longer screws, thicker or slimmer washers or spacers. These additional accessories can often be found at your local hardware store.
Construction: The Secura QMT35-B2 tilting wall-mount bracket is constructed of heavy-gauge steel with a durable powder-coated black finish. This solid construction provides strength and increased safety.
Tilt & Lateral Adjustment: The Secura QMT35-B2 lets you easily tilt your TV up to 10° forward or up to 5° backward to reduce glare and improve line-of-sight with the television screen. When not tilted, your TV sits only 2.125" from the wall. You can also move your mounted TV left or right along the wall-plate to make sure the television is centered properly.
Quick-Releasing Locking System: A quick-release locking system secures your TV to the QMT35-B2's wall-plate. Once the wall-plate is anchored to the wall studs and the two TV brackets are attached to the back of your television, the two TV brackets hook and click into the wall-plate. There is a strap on each TV bracket which allows you to remove the brackets and your television from the wall-plate.
Dual-Stud Installation: The Secura QMT35-B2 tilting wall-mount bracket can accommodate both 16" stud spacing (not compatible with 24" stud spacing), and comes with all the hardware you need for wood stud and concrete installation. Tools required for installation include -
- Tape measure
- Pencil
- Stud finder
- Level
- Awl
- Drill
- 1/8" Drill bit (for wood stud)
- 3/8" Masonry bit (for concrete block)
- 7/16" Socket wrench
- Phillips-head Screwdriver
- Hammer
Loading accessories...
Customer Q&A
Loading articles...