About the Secura QSF207
Position your small TV or monitor for optimal viewing with the Secura QSF207 full-motion wall mount. The hinged arm swings out to extend your TV up to 7-5/8" away from the wall. The mount can be swiveled from side to side and tilted up or down. After installation, the mount's "roll" adjustment lets you fine-tune your TV's position to ensure that it's level. And installation is a simple three-step process: Mount the wall plate to a wall stud, attach the bracket to the back of your TV, then lock it into place on the hinged arm. Zip ties are also included so you can secure your TV's cables to the mount's arm, presenting a cleaner, more organized appearance.
- designed for TVs 10"-39"
- supports up to 25 lbs.
- mount holds TV approximately 7-5/8" from wall
- tilt range: +4° to -16° (may vary with size of TV)
- roll adjustment: +3° to -3°
- swivel range: ±28°
- stud-mounting required
- zip ties included to secure cables to arm
- UL-certified for safe mounting and structural integrity
- 10-1/4"W x 8-13/16"H x 3-5/16 to 7-5/8"D
- warranty: 5 years
- Our 60-day money-back guarantee
- MFR # QSF207-B2
What's in the box:
- Wall-plate w/ extension arm
- TV bracket
- 4 TV bracket extenders
- Four M4x8mm screws
- Eight M4x12mm screws
- Four M4x35mm screws
- Four M6x12mm screws
- Four M6x35mm screws
- Four M8x16mm screws
- Four M8x20mm screws
- Four M8x35mm screws
- 8-32x3/8" Screw
- Two 1/4"x2-3/4" lag-bolts
- Four M4 washers
- Four M6/M8 washers
- Two 0.75" washer
- 8-32 Washer
- Four 22mm spacers
- 2 Concrete anchors
- 3 Cable-ties
- Instruction Manual
- Warranty Information
Secura QSF207 reviews
Thanks for submitting your review
More details on the Secura QSF207
TV Compatibility: The Secura QSF207-B2 is a full-motion wall-mount bracket for 10"-39" flat-panel TVs up to 25 lbs.
VESA Pattern: The Secura QSF207-B2 features a universal mounting bracket and extension brackets to accommodate horizontal hole spacing on back of TVs of 75mm-200mm and a vertical hole spacing of 75mm-200mm. It will accommodate the following VESA hole patterns in accordance with industry standards set by the Video Electronics Standards Association.
- 75 x 75
- 100 x 100
- 200 x 100 (using included extension brackets)
- 200 x 200 (using included extension brackets)
M4/M6/M8 Mounting Hardware: The Sanus QSF207-B2 comes with M4, M6, and M8 size bolts of differing lengths to mount the bracket to your TV. Additional hardware may be required for your specific model of TV. For example; shorter or longer screws, thicker or slimmer washers or spacers. These additional accessories can often be found at your local hardware store.
Construction: The Secura QSF207-B2 wall-mount bracket is constructed of heavy-gauge steel with a durable powder-coated black finish. This solid construction provides strength and increased safety.
Full-Motion Design: The QSF207-B2 extends from the wall (3.3125"-7.625"), tilts up/down (+4°/-16°), swivels left or right (+/-28°), and rolls (+3°/-3°) for easy viewing anywhere in the room.
Installation Tools: The following tools are recommended for mounting the QSF207-B2:
- Tape measure
- Stud finder
- 7/32" Drill bit (for wood stud)
- 3/8" Masonry bit (for concrete block)
- 1/2" Socket wrench
- Phillips-head Screwdriver
The Secura QSF207 replaces these items
Q Crutchfield asked: Why did you buy this?