Skip Navigation

Secura QSF210

Full-motion wall mount with hinged arm for 10"-39" TVs

2 Reviews

Item # 993QSF210

Low Stock

 Ships FREE

Add to Cart

Ask an expert

Our VA-based experts can help.




Our take on the Secura QSF210

With the Secura QSF210 mount, you can position your small TV or monitor for optimal viewing. The hinged arm swings out to extend your TV up to 10-1/2" away from the wall. The mount can be swiveled from side to side, and tilted up or down. After installation, the mount's "roll" adjustment lets you fine-tune your TV's position to ensure that it's level. And installation is a simple three-step process: Mount the wall plate to a wall stud, attach the bracket to the back of your TV, then lock it into place on the hinged arm. Zip ties are also included so you can secure your TV's cables to the mount's arm, presenting a cleaner, more organized appearance.

Product Highlights:

  • designed for TVs 10"-39"
  • supports up to 25 lbs.
  • mount holds TV approximately 10-1/2" from wall
  • tilt range: +4° to -16° (may vary with size of TV)
  • roll adjustment: +3° to -3°
  • swivel range: ±42°
  • stud-mounting required
  • zip ties included to secure cables to arm
  • UL-certified for safe mounting and structural integrity
  • 10-1/4"W x 8-13/16"H x 3-3/16" to 10-1/2"D
  • warranty: 5 years
  • Our 60-day money-back guarantee

What's in the Box:

  • Wall-plate w/ extension arm
  • TV bracket
  • 4 TV bracket extenders
  • Eight M4x8mm screws
  • Four M4x12mm screws
  • Four M4x35mm screws
  • Four M6x12mm screws
  • Four M6x35mm screws
  • Four M8x16mm screws
  • Four M8x20mm screws
  • Four M8x35mm screws
  • 8-32x3/8" Securement screw
  • Two 1/4"x2-3/4" lag-bolts
  • Four M4 washers
  • Four M6/M8 washers
  • Two 0.75" washer
  • 8-32 Washer
  • Four 22mm spacers
  • 2 Concrete anchors
  • 3 Cable-ties
  • 7/32" Allen-key
  • Instruction Manual
  • Warranty Information

Secura QSF210 Reviews

Average Customer Review(s):

(2 Reviews)

Secura QSF210

Crutchfield customer from Charlottesvle, VA on 2/13/2019

Crutchfield Customer Review (What's this?)

Works great. Installation was excellent. Advice from Crutchfield installers were very helpful.



TV Mounting Support

John from Dallas, TX on 3/30/2018

Crutchfield Customer Review (What's this?)

The mounting bracket met all of my needs except that it did not extend as much as I had anticipated. It supported the TV adaquately and allowed tilt adjustment up and down as needed. The extension out from the Wall was not adaquate to allow the TV to be turned enough side to side for my installation.

Pros: Good support

Cons: Limited extension from the mounting surface


Hands-on research

Product Research


TV Compatibility: The Secura QSF210-B2 is a full-motion wall-mount bracket for 10"-39" flat-panel TVs up to 25 lbs.

VESA Pattern: The Secura QSF210-B2 features a universal mounting bracket and extension brackets to accommodate horizontal hole spacing on back of TVs of 75mm-200mm and a vertical hole spacing of 75mm-200mm. It will accommodate the following VESA hole patterns in accordance with industry standards set by the Video Electronics Standards Association.

  • 75 x 75
  • 100 x 100
  • 200 x 100 (using included extension brackets)
  • 200 x 200 (using included extension brackets)

M4/M6/M8 Mounting Hardware: The Sanus QSF210-B2 comes with M4, M6, and M8 size bolts of differing lengths to mount the bracket to your TV. Additional hardware may be required for your specific model of TV. For example; shorter or longer screws, thicker or slimmer washers or spacers. These additional accessories can often be found at your local hardware store.

Construction: The Secura QSF210-B2 wall-mount bracket is constructed of heavy-gauge steel with a durable powder-coated black finish. This solid construction provides strength and increased safety.

Full-Motion Design: The QSF210-B2 extends from the wall (3.25"-10.4375"), tilts up/down (+4°/-16°), swivels left or right (+/-30°), and rolls (+3°/-3°) for easy viewing anywhere in the room.

Installation Tools: The following tools are recommended for mounting the QSF210-B2:

  • Tape measure
  • Pencil
  • Stud finder
  • Level
  • Awl
  • Drill
  • 7/32" Drill bit (for wood stud)
  • 3/8" Masonry bit (for concrete block)
  • 1/2" Socket wrench
  • Phillips-head Screwdriver
  • Hammer

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Q & A

Customer Q&A

Crutchfield asked  
Why did you buy this?

Mount finder [ DARREN  Feb 10, 2019 ]
range of motion [ David  May 22, 2018 ]
Web site selection for tv model [ Joseph  Mar 10, 2018 ]

Searches related to the Secura QSF210 Full-motion wall mount with hinged arm for 10"-39" TVs