About the Secura QST25
The Secura QST25 mount is ideal for a computer monitor or small TV. You can set the mount to either hold your TV flat against the wall, or tilted down at a 6° angle. Installation is a simple three-step process: Mount the wall plate to a wall stud, attach the bracket to the back of your TV, then lock the TV into place on the wall plate.
- designed for TVs 10"-39"
- supports up to 35 lbs.
- can be mounted to either a flat profile, or -6° tilt
- bracket locks to wall plate
- stud-mounting required
- UL-certified for safe mounting and structural integrity
- 8-7/8"W x 8-7/8"H x 15/16"D
- warranty: 5 years
- Our 60-day money-back guarantee
- MFR # QST25-B2
What's in the box:
- TV bracket
- 2 Bracket extenders
- Four M4x12mm screws
- Four M4x35mm screws
- Four M6x12mm screws
- Four M6x14mm screws
- Four M6x35mm screws
- Four M8x16mm screws
- Four M8x20mm screws
- Four M8x35mm screws
- Two 1/4"x2-3/4" lag-bolts
- Four M4 washers
- Four M6/M8 washers
- Four M6 nuts
- Four 22mm spacers
- 2 Concrete anchors
- Instruction Manual
- Warranty Information
More details on the Secura QST25
TV Compatibility: The Secura QST25-B2 is a low-profile and fixed tilt wall-mount bracket for 10"-39" flat-panel TVs up to 35 lbs.
VESA Pattern: The Secura QST25-B2 features universal mounting brackets to accommodate horizontal hole spacing on back of TVs of 75mm-200mm and a vertical hole spacing of 75mm-200mm. It will accommodate the following VESA hole patterns in accordance with industry standards set by the Video Electronics Standards Association.
- 75 x 75
- 100 x 100
- 200 x 100
- 200 x 200 (requires included adapter brackets)
M4/M6/M8 Mounting Hardware: The Sanus QST25-B2 comes with M4, M6, and M8 size bolts of differing lengths to mount the bracket to your TV. Additional hardware may be required for your specific model of TV. For example; shorter or longer screws, thicker or slimmer washers or spacers. These additional accessories can often be found at your local hardware store.
Construction: The Secura QST25-B2 wall-mount bracket is constructed of heavy-gauge steel with a durable powder-coated black finish. This solid construction provides strength and increased safety.
Fixed 6° Tilt or Low-Profile Positioning: The Sanus QST25-B2 offers two positioning options - fixed 6° tilt or low-profile. The fixed 6º tilt position provides a better viewing angle in case you have to hang your TV up high. The low-profile position places your TV just 0.9375" from the wall for normal viewing.
Note: The QST25-B2's TV bracket and your TV must be removed from the wall-plate to reposition the TV bracket and your TV for tilt or low-profile positioning.
Locking System: Once the wall-plate is anchored to the wall stud and the TV bracket is attached to the back of your television, the TV bracket hooks over the wall-plate. A latching mechanism locks the TV bracket in place.
Installation Tools: The following tools are recommended for mounting the QST25-B2:
- Tape measure
- Stud finder
- 7/32" Drill bit (for wood stud)
- 3/8" Masonry bit (for concrete block)
- 1/2" Socket wrench
- Phillips-head Screwdriver
Q Crutchfield asked: Why did you buy this?