About the Blaupunkt GT Power 66.2C
Product highlights:
- 6-3/4" component speaker system (two woofers, two tweeters, in-line crossovers)
- injected polypropylene woofer with treated foam surround
- 1" Mylar semi-dome tweeter
- power range: 2-62 watts RMS (260 watts peak power)
- frequency response: 40-22,000 Hz
- sensitivity: 92 dB
- top-mount depth: 2.3228"
- warranty: none (Crutchfield's 60-day satisfaction guarantee applies)
- MFR # AAV-GTPOWER66.2C
What's in the box:
Blaupunkt GT Power 66.2C owner's manual
- 2 Woofers
- 2 Plastic grilles
- 2 Tweeters (each has a 4" length of wire attached)
- 2 Crossovers with attached 8' input leads and 28" output leads (the input leads have bare wire and the output leads are terminated with quick-slides)
- 2 Flush-mount tweeter housings (with tweeters installed)
- 2 Angled surface-mount tweeter housings
- 2 Flush-mount retaining clips
- Eight 1-1/4" Self-tapping screws
- Four 5/8" Flat-head screws
- 8 Speed clips
- Woofer template
- Instructions
Customer reviews for Blaupunkt GT Power 66.2C
Loading...
Loading reviews...
Average review:
4.5 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Blaupunkt GT Power 66.2C
Features & specs
General | ||
---|---|---|
Speaker Size | ||
Design | 2-way | |
Tweeter Design | 1" Semi-dome | |
Impedance (Ohms) | 3 | |
Tweeter Composition | Mylar | |
Woofer Composition | Injected Polypropylene | |
Woofer Surround | Rubber | |
Parts Warranty | 60 Days | |
Labor Warranty | 60 Days | |
Specifications | ||
Sensitivity (1W at 1 meter) | N/A | |
Sensitivity at 2.83 volts | 92 | |
Frequency Response | 40 - 22k Hz | |
Minimum RMS Wattage | 2 | |
Maximum RMS Wattage | 62 | |
Peak Power Handling (Watts) | 260 | |
Top-mount Depth (Inches) | 2 3/8 | |
Bottom-mount Depth (Inches) | 2 9/16 | |
Cutout Diameter or Length (inches) | 5 11/16 | |
Mounting Height (Inches) | 0.246 | |
Frame Width | 6.56 | |
Frame Length | 6.56 |
Product Research
Features
Size Classification Note: Crutchfield has traditionally referred to this woofer size as a 6-3/4", while Blaupunkt describes it as 166mm. Please check the Crutchfield Vehicle Selector to confirm fit in your vehicle.
Tweeter: Out of the box, the tweeters are mounted in the flush mount housings. An angled surface mount housing is also included, and the back of the the flush mount housing and the top of the angled surface mount housing are combined to make the (non-angled) surface mount housing. Once mounted, the tweeters swivel so you can direct them toward the listening positions.
Tweeter Dimensions:
Frame Diameter | Frame Width | Frame Depth | Cutout Diameter | Mounting Height | Mounting Depth | |
---|---|---|---|---|---|---|
Flush Mount | 2.125" | N/A | N/A | 1.83" | 0.344" | 0.76" |
Surface Mount | 1.815" | N/A | N/A | N/A | 1.1" | 0.63" (Screw Depth) |
Angled Surface Mount | N/A | 1.815" | 1.825" | N/A | 1.65" | 0.56" (Screw Depth) |
Crossover: The crossovers are in-line with the included speaker wire. On the input side the wire is 8' long and terminates with tinned bare wire. The tweeter and woofer outputs are both 28" long and are terminated with quick slides. No crossover frequency or slope information was provided by the manufacturer.
Crossover Dimensions:
- Length: 1.83" (plus wiring)
- Height: 0.965"
- Width: 1.22"
Loading...
Loading accessories...
Customer Q&A
Loading...
Loading articles...
Crutchfield makes it so easy to upgrade old car stereo from the golden oldies. I have a 96 Pathfinder and was expecting a whole day of installation. Took me only 2 hours to completely install front and rear speakers with the instructions they provided and the kits. I will buy from no other company !
Kwn from Weston ,FL