About the Blaupunkt 6902A
Blaupunkt designed their 6902A powered subwoofer to fit in your spare-tire housing, so you get bass that's out of sight. This GT Series powered sub comes equipped with two 6"x9" polypropylene woofers powered by an internal amplifier that delivers 150 watts RMS. You get a hidden powered subwoofer that really rumbles.
Product highlights:
- powered subwoofer with dual 6"x9" woofers
- built-in 150-watt RMS amplifier (300 watts maximum)
- frequency response: 20-120 Hz
- dimensions: 22-1/2"W x 6-3/8"H x 22-1/2"D
- warranty: none (Crutchfield's 60-day satisfaction guarantee applies)
- MFR # AAV-GTPOWER6902A
What's in the box:
Blaupunkt 6902A owner's manual
- Amplified subwoofer
- Two 15 amp ATO fuses (1 installed)
- 10' Wiring harness (power/ ground/ speaker level input)
- Owner's manual
Customer reviews for Blaupunkt 6902A
Loading...
Loading reviews...
Average review:
5.0 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Blaupunkt 6902A
Features & specs
General | ||
---|---|---|
Enclosure Type | Ported | |
Finish Material | Carpet | |
Grille | N/A | |
Connector Type | RCA/Molex | |
Quick-disconnect Plug | --- | |
Bi-amp Inputs | No | |
Woofer Size (inches) | 6x9 x2 | |
Woofer Material | Injected Polypropy | |
Passive Radiator | --- | |
Width | 22-1/2" | |
Height | 6-3/8" | |
Depth | 22-1/2" | |
Parts Warranty | 60 Days | |
Labor Warranty | 60 Days | |
Specifications | ||
Frequency Response | 20-120 | |
Amplifier Power (RMS) | 150 watts | |
Maximum Wattage | 300 watts | |
Sensitivity | N/A | |
Impedance | N/A | |
Second Voice Coil Impedance | N/A | |
Crossover Point | 60-120 |
Product Research
Features
Overview: The GTs 6902 A amplified subwoofer features a 150-watt RMS (300-watts max) amp and two 6x9 subwoofers housed in an enclosure designed to fit in the spare tire well (the spare tire is removed).
Auto Turn-on: The amplifier automatically turns on when it detects a signal on the line or speaker level inputs. After approximately 60 seconds with no input signal, the amplifier will turn off.
Controls:
- Gain: rotary dial to set the amplifier input gain; continuously variable from 300mV to 5V for the line level inputs and 1.2V to 16V for the speaker level inputs
- X-Over: rotary dial to set the low-pass crossover frequency; continuously variable from 60 Hz to 120 Hz
- Phase: rotary dial to set the subwoofer phase; continuously variable from 0° to 180°
Connections:
- Power: the included 10' harness has two power and two ground wires (all should be connected and the power wires should be fused at the battery)
- Speaker Input: the included 10' harness also has left and right speaker level input wires
- Line Input: stereo RCA jacks
- RF Link: RJ-25 jack; not used in this installation
Loading...
Loading accessories...
Customer Q&A
Loading...
Loading articles...
I didn't expect much from this unit because it uses two 6"x9" speakers in the subwoofer, but man was I wrong!
THale from Bremerton, WA