About the Focal Integration IS 165
Focal applies the same technology they use in their studio and audiophile-grade home systems to their Integration line of car speakers. The Integration IS 165 component system features 6-3/4" woofer cones made from Polyglass, a material that combines the warm sound of cellulose with the strength of glass, for a woofer that plays accurately with no added resonances.
Adjustable tweeter
The separate Integration processed aluminum inverted dome tweeter features a built-in phase plug and wave guide, which act together to increase the power of high-frequency notes and improve the stereo soundstage. You can also tilt the tweeter for better imaging in many vehicles.
Built-in crossover networks
The crossover networks are built-in, so you don't have those extra boxes to install. Integration speakers allow you to put Focal sound quality and construction into your vehicle, so you can enjoy a dramatic jump in performance over your old speakers.
Note: Focal describes this model as a 6-1/2" speaker. Most manufacturers designate this same frame size as a 6-3/4" speaker. For simplicity's sake we list it as a 6-3/4" speaker.
Product highlights:
- component speaker system includes two 6-3/4" woofers, 2 tweeters, and 2 woofer grilles
- Polyglass woofer with butyl rubber surround
- processed aluminum inverted dome tweeter
- built-in crossovers
- 4-ohm impedance
- 5-70 watts RMS power range (140 watts peak)
- frequency response: 60-20,000 Hz
- sensitivity: 92.6 dB
- woofer top-mount depth: 2"
- warranty: 1 year
- MFR # IS165
What's in the box:
Focal Integration IS 165 owner's manual
- Two 6-3/4" Woofers
- Two inverted dome tweeters (with 18" length of speaker wire attached)
- 2 Surface mount tweeter housings (installed)
- 2 Angled surface mount tweeter housings
- 2 Woofer grilles
- 2 Grille mounting rings
- 2 Foam woofer gaskets
- 8 Speed clips
- Four 7/8" Flathead screws
- Eight 1" Self-tapping screws
- Owner's manual (English/ French)
- Focal window sticker
Customer reviews for Focal Integration IS 165
Loading...
Loading reviews...
Average review:
5.0 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Focal Integration IS 165
Features & specs
General | ||
---|---|---|
Speaker Size | ||
Design | 2-way | |
Tweeter Design | Inverted Dome | |
Impedance (Ohms) | 4 | |
Tweeter Composition | Aluminum | |
Woofer Composition | Polyglass | |
Woofer Surround | Butyl Rubber | |
Parts Warranty | 1 Year | |
Labor Warranty | 1 Year | |
Specifications | ||
Sensitivity (1W at 1 meter) | N/A | |
Sensitivity at 2.83 volts | 92.6 | |
Frequency Response | 60 - 20k Hz | |
Minimum RMS Wattage | --- | |
Maximum RMS Wattage | 70 | |
Peak Power Handling (Watts) | 140 | |
Top-mount Depth (Inches) | 2 | |
Bottom-mount Depth (Inches) | 2 1/8 | |
Cutout Diameter or Length (inches) | 5 5/8 | |
Mounting Height (Inches) | 0.29 | |
Frame Width | 6.552 | |
Frame Length | 6.552 |
Product Research
Woofer
Polyglass Cone: The woofer cone has a cellulose pulp base and is coated with a uniform deposit of hollow glass microballs. The addition of the Polyglass layer significantly increases the cone's rigidity without adding much weight. This combination takes advantage of the accuracy and neutrality of the hard outer surface, but maintains the superior damping characteristics of the cellulose pulp.
Surround: The butyl rubber surround is resistant to ultraviolet rays, temperature extremes, and humidity to add to the speaker's reliability and longevity.
Tweeter
Inverted Dome Tweeter: The tweeter is an inverted aluminum dome, producing a broad sound stage. The tweeter has a Neodymium magnet to provide a powerful magnetic field for the voice coil, while still maintaining the tweeter's compact dimensions.
Mounting Options: The tweeters can be surface mounted and include two types of surface mount housings, one low profile and one angled:
Flush Mount | Low Profile Surface Mount | Angled Surface Mount | |
---|---|---|---|
Mounting Height | 0.292" | 0.908" | 1.935" |
Mounting Depth | 0.511" | 0.885" (screw depth) | 0.8" (screw depth) |
Frame Diameter | 1.886" | N/A | N/A |
Cutout Diameter | 1.677" | N/A | N/A |
Width | N/A | 1.887" | 1.892" |
Surface Depth | N/A | 1.887" | 2.865" |
Crossover
Crossovers: Each woofer and each tweeter has an integrated 6 dB/octave crossover. Because the woofer and tweeter crossovers are separate, the system can be bi-amped.
Note: No crossover point frequency specifications are provided.
The Focal Integration IS 165 replaces these items
Focal Access 165 A1
- humidity-resistant, woven glass-fiber woofer
- aluminum inverted dome tweeter
- 6-60 watts RMS power range
Loading...
Loading accessories...
Customer Q&A
Loading...
Loading articles...
Just purchased my second set for my Dodge Ram and I must say AMAZING! I am running two sets on a Kenwood 750.4 with a set of Re Audio Pro Subs and Re Audio 1000.0 amp. I would recommend these speakers highly.
Ygnacio V from Houston, TX