2010-2014 Ford Mustang coupe
2010 • 2011 • 2012 • 2013 • 2014
Matt Holliday was one of Crutchfield's ace car enthusiasts for several years. He brought a lifetime of knowledge and experience to our team. He has since left the company to join the family business and pursue other interests.
More from Matt Holliday
In a Nutshell
This article discusses how to install car audio gear in your Ford Mustang. Check it out and then use our vehicle selector to find audio gear that will fit your car.
The simplest way to improve the sound in your Mustang is with new speakers. Front speakers are the easiest to change and will make the biggest difference. The rear speakers are not as audible and a little harder to get to, so you can probably spend a little more on a nicer set for the front doors.
If you're a true audiophile, you know the value of a quality receiver. Once you've made that swap, your best move is to remove all the factory speakers and subs, and replace them with aftermarket gear.
Overview of the Ford Mustang
In 2010, Ford gave its wildly popular fifth-generation Mustang coupe a thorough mid-cycle freshening. The revamped ponycar boasted subtle styling tweaks, increased horsepower, and improved fuel economy. Several stereo systems were available for this Mustang, many equipped with the SYNC interface system that a lot of owners love. But if you're serious about sound, there's plenty of room for improvement. The aftermarket loves the Mustang as much as the car-buying public does, so there are options for everything from replacing a few speakers to adding a completely new system.
This article is an overview of your vehicle's audio system and its upgrade options. Looking for step-by-step instructions on installing a car stereo or speakers in your Mustang? We'll include a Crutchfield MasterSheet™ free with your Crutchfield order, or you can purchase one for $9.99.
Replacing your factory radio
Factory radio in Shaker 500 system (Crutchfield Research Photo)
The factory deck is integrated into the dash, which makes replacement a little complicated. You'll need a special dash adapter that replaces a good portion of the dash and allows you to install a DIN (2" tall) or double-DIN (4" tall) radio. You'll also need a special wiring adapter that allows you to connect your new radio without having to cut the factory wiring, along with an antenna adapter that connects the Ford antenna to your new radio.
It's not an easy job, but the good news is that there are products to make it better, including a dash adapter that matches the factory colors of your interior and adapters that retain your steering wheel control features. Crutchfield offers a very nice discount on the gear needed for this installation, and our step-by-step MasterSheet™ instructions for your Mustang are free.
Ford was kind enough to pack most factory systems with plenty of features and options, including stereos with integrated satellite radio tuners, as well as the ability to add more music sources like an iPod. If you decide to keep the factory head unit, you can still get great sound, as there are plenty of ways to improve the overall system by adding speakers, amps and more.
Mustang dash totally disassembled (Crutchfield Research Photo)
Ford offers two versions of its long-running Shaker system in the Mustang:
- the Shaker 500 system features powered 8" subwoofers and 2-way 6"x8" speakers in each front door, with 6"x8" speakers in the rear parcel shelf
- the Shaker 1000 system adds another amplifier and two larger subs in the trunk.
You'll run into the same issues replacing the radio in your Shaker system, with the added complication of the SYNC system. SYNC gives you the ability to control several features of the Mustang, like audio settings, Bluetooth® functions, climate controls and more, through voice commands and steering wheel controls. To retain all that SYNC functionality, you'll need the right wiring harness adapter. When you enter your vehicle info on our Outfit My Car page, our KitFinder tool will help you find the right receiver, the right dash kit, and the right wiring kit.
Tools needed: 7mm socket, panel removal tool, small slotted screwdriver
Steering wheel audio controls
It's relatively easy to retain your Mustang's steering wheel audio controls when you install a new stereo. When you enter your vehicle information, our database will choose the adapter you need to make your factory steering wheel controls work with your new receiver.
Replacing your factory speakers
On Shaker-equipped cars, the mid-range speaker is above the 8" sub. (Crutchfield Research Photo)
From 2010-12, the Mustang's front doors held 6"x8" full-range speakers, which can be replaced by same-size or (with brackets) 5-1/4" speakers In 2013, 5-1/4" speakers became the standard factory size, but in either case, door removal is largely the same. You'll need speaker harnesses to attach the new speakers to the factory wiring, and at Crutchfield, these harnesses (and mounting brackets, if needed) are deeply discounted with every speaker order.
The Mustang's 6" x 8" door speaker (Crutchfield Research Photo)
Removal of the speakers is fairly straightforward — just pop off the door panels (requires removing eight 7mm bolts, and two T30 Torx screws) and replace the old speakers with your new ones. You can use speaker harness adapters to connect the new speakers to the Ford speaker plugs, or you can splice the new speakers' wires into the factory harnesses if you know what you're doing.
The Mustang's rear deck speakers (Crutchfield Research Photo)
Rear deck speakers
The Mustang's rear speakers are also 6"x8"s, and again you have the option of round 5-1/4" speakers in speaker brackets. In most cases, you'll be able to use the same speakers front and back. You must remove several interior body panels as well as the lower portion of the rear seat to access the speakers, and you'll again need wiring adapters if you don't want to splice into the factory wire harness.
Removing the rear deck speaker (Crutchfield Research Photo)
The Shaker systems offered on the Mustang came with pretty decent speakers, so you'll want to pick some good-quality speakers to replace them. Your Mustang will also have 8" subwoofers in the doors.
Tools needed: Socket wrench, 7mm socket, Torx T20 and T30 drivers, panel removal tool, small slotted screwdriver[SHOPCARSPEAKERS]
Bass in your Mustang
How and where you pump up the thump in your Mustang depends on what you want and, to an extent, what you're starting with.
If you want to preserve your trunk space, you'll find a number of specially-made subwoofer enclosures available for the Mustang from brands like JL Audio and MTX that fit neatly in the out-of-the-way corners of the trunk. If you want competition-level bass, you'll find plenty of room in the Mustang's trunk for a custom installation.
Shaker system 8" sub in the door (Crutchfield Research Photo)
Shaker 500 system
Due to the low impedance (1.8) and odd size of the 8" subs in your front doors, there are very few options for replacing them with aftermarket 8" woofers, and the 3-1/4" mounting depth in the door makes it especially tough. You can keep these subs along with their amps, or remove them entirely to use this space for component speakers, crossovers and more. You can get better sound from an amplified midrange speaker in a nice component set, so you won't be losing the low notes by going without these shallow subs.
Subwoofer removed from the door (Crutchfield Research Photo)
Shaker 1000 system
The biggest difference between the Shaker 500 and the Shaker 1000 systems is the addition of powered subwoofers in the trunk. We recommend installing some of the Mustang-specific sub enclosures we carry, as they require less room than the Shaker 1000 subs while delivering more of a kick. You'll save space and get more bass.
Other options for your Mustang
There are plenty of great ways to turn your Mustang's sound system into something truly amazing.
Adding an amplifier, even to the Shaker systems that include small factory amps, will increase the sound output and clarity of your music; it will get louder and it will sound better. Since some of the factory speakers have odd impedance levels, you'll want to upgrade those when you upgrade your amps.
Many Mustangs come from the factory with a satellite radio tuner. If you're replacing your factory radio, you can switch over to an external SiriusXM satellite radio tuner and simply transfer your subscription.
Installing a security system in your Mustang isn't easy (security systems rarely are), but it's definitely a good idea. Our Crutchfield Advisors can help figure out what you need to get the job done, but we usually recommend taking your car and new gear to a professional installer.
Find the audio gear that fits your car or truck
Visit our Outfit My Car page and enter your vehicle information to see stereos, speakers, subs, and other audio accessories that will work in your vehicle.