OEM Integration Kit: This OEM Integration Kit allows you to replace
the factory radio of your 2012-2013 Chevrolet Sonic or Spark vehicle with an
aftermarket radio. The OEM Integration Kit includes a Radio Replacement/SWC
interface module (RP5-GM41) with external chime module, radio & vehicle
harnesses, and a radio housing kit which will accommodate double- or single-DIN
aftermarket head units. This all-in-one OEM Integration Kit comes pre-loaded
with OnStar retention, amplifier retention, SWC software, navigation based
output signals, and other features that save time and money during installation.
Vehicle Compatibility: This OEM Integration Kit is compatible with
2012-2013 Chevrolet Sonic and Spark vehicles with 29-bit LAN v2 44-pin connector
radios. Please consult Crutchfield's
Outfit My Car to see if your vehicle is compatible. Visit
www.pac-audio.com for more compatibility information.
Radio Housing Kit: The OEM Integration Kit includes a radio housing
kit which allows you to mount a double- or single-DIN aftermarket head unit in
your 2012-2013 Chevrolet Sonic or Spark vehicle's dash. The mounting kit is made of durable ABS plastic and is
available in a black or dark grey finish. A 6.125" (w) x 1.5" (h) x 4.125"
(d) pocket is included, when installing an aftermarket single-DIN head unit.
Radio Replacement Module: The included radio replacement interface
(RP-5GM41) allows the replacement of the factory radio in your 2012-2013
Chevrolet Sonic or Spark with an aftermarket head unit. This interface
module allows you to retain factory features such as OnStar, Bluetooth, steering
wheel control (SWC), and warning chimes. The RP5-GM41 also provides data bus
driven outputs such as retained accessory power (RAP), vehicle speed sensor
(VSS), illumination, reverse trigger, and parking brake.
Built-in SWC (Steering Wheel Control): The radio replacement
interface features built-in steering wheel control and comes pre-programmed for
all of your vehicle's factory SWC functions and does not require programming,
unless you wish to re-assign the SWC functions to different buttons. The SWC
harness contains a Blue/Yellow wire and a 3.5mm connector. You will only use one
of the connectors, based on your type of aftermarket radio.
Connector Type ||Radio
|Blue/Yellow Wire ||Kenwood, Newer JVC, OEM, Blaupunkt |
|3.5mm Jack ||Alpine, Older JVC, Clarion,
Pioneer, Sony, Valor, or Dual |
Radio Select Switch: The radio select rotary switch on the
side of the interface must be adjusted to the proper radio setting before
plugging the interface into the vehicle.
|# Dial ||Radio
|1 ||Alpine |
|2 ||JVC |
|3 ||Kenwood |
|4 ||Clarion |
|5 ||Valor |
|6 ||OEM |
|7 ||Dual, Pioneer, Sony |
| 8 ||Blaupunkt |
Aftermarket Radio Connection: The included wiring harness
features the following hardwire connections to your aftermarket head unit.
Color ||Function |
|Yellow ||+12 Volt Constant |
|Black ||Ground |
|Red ||+12 Volt Accessory |
|White ||Left Front Speaker + |
White/black ||Left Front Speaker - |
|Gray ||Right Front Speaker + |
Gray/black ||Right Front Speaker - |
|Green ||Left Rear Speaker + |
Green/black ||Left Rear Speaker - |
|Purple ||Right Rear Speaker + |
Purple/black ||Right Rear Speaker - |
Red/white ||Parking Brake Detection (-) |
Purple/white ||VSS Output |
|Blue/white ||(not used) |
|Blue ||(not used) |
|Orange/white ||Illumination Output (+) |
|Green ||Reverse Output (+) |
|Brown Loop ||Mute Loop (if aftermarket radio is
equipped with a mute wire, cut this loop and hook the inside brown
wire to the radio's mute wire |
Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.