Skip Navigation

Clarion CCA519

CeNet Y-adapter for multi-changer connection ( )

1 Review

Item # 020CCA519

This item is no longer available.

Shop all Other Car Stereo Accessories


Our take on the Clarion CCA519

The Clarion CCA519 Y-adapter allows a Clarion CeNet receiver to control two Clarion CeNet CD changers. The 39" adapter has a 10-pin female connector at one end (connects to the receiver) and two separate cables, each ending with a 10-pin male connector (plugs into CeNet changer).

What's in the Box:

  • 39" CeNET Y-adapter

Clarion CCA519 Reviews

Average Customer Review(s):

(1 Review)


VERSACE from MIAMI, FL on 4/2/2009

Crutchfield Customer Review (What's this?)

By own experience, if you have a Clarion CeNet Car Radio and you Bought it or is from 2006 or an older model, this cable might not work for you. I think these models have 13pins plug and the Clarion CCA-519_601 "Y" adapter or splitter really, has only 10pins plugs. 1 female that split to 2 males. My Car Radio is a (Clarion DMX 5555z) Double Din CD and MD Receiver that I bought it in 2003 and is in mint condition, I connected my Clarion DCZ625 6CD's changer (Brand New, 5 days old) in one end and the Clarion EA1251 iPod Interface unit that I've been using for almost a month to the other end And the Radio Started to Powering off as if there was a Short Circuit. I immediately disconnected everything again and re-tested both the CD changer and the iPod interface units individually and they worked perfectly again. except that I could only have one plugged at a time, because the receiver has one Jack only, So naturally I left the iPod connected, until I do research and find out if there is a 13pins "Y" splitter. Conclusion, do your HomeWork, find out exactly what you need before you end up like me, spending this much on a cable that I have to return and the DCZ625 CD Changer that I don't If I could return or further more I don't know if I could ever use it, if there isn't a 13pin splitter cable.




Hands-on research

Product Research


Compatibility: This Y-adapter allows a Clarion CeNET head unit with changer controls to control two Clarion CeNET changers. One end of the adapter has a 10-pin female connector that plugs into the head unit's changer cable. The other end of the adapter branches off into two separate cables. Each separate cable has a 10-pin male connector that plugs into a CeNET changer. Using more than one adapter, you can control up to four changers from a single Clarion CeNET head unit. Two changer control requires one CeNET Y-adapter, three changer control requires two CeNET Y-adapters, and four changer control requires three CeNET Y-adapters.

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.