Network & Tuner Functions
Yamaha's Total Purity Concept: The Yamaha RX-V475 AV Receiver
incorporates Yamaha's Total Purity Concept for the finest sound quality. The
Total Purity Concept, which Yamaha has been cultivating for many years,
encompasses high drive amp technology, high purity pre-amplification,
anti-vibration technology, and independent pure power supplies. As a result,
this AV receiver can provide high-quality sound for your movie & music
- High Drive Amp Technology: A fully discrete power
amplifier helps maximize sound and minimize distortion of the receiver. The
Yamaha RX-V475 AV Receiver is equipped with a 5-channel amplifier rated at
80 watts (into 8-ohms, at 20-20kHz, with 0.09% THD, driving 2 channels) which
provides high dynamic power with low-impedance drive capability.
- High Purity Pre-Amplification: The Yamaha RX-V475 uses high quality, audio-grade
Burr-Brown 192kHz/24-bit digital-to-analog converters for all channels to maximize
sound quality. The AV receiver also utilizes low-jitter
PLL circuitry to help optimize sound imaging. The result is a more dynamic sound
with greater detail and less distortion.
- Anti-Vibration Technology: The AV receiver's
anti-vibration heatsinks suppress vibration from transistors and sound
- Independent Power Supplies: Independent power supplies
are used for the receiver's analog and digital circuitry to prevent digital
noise from affecting analog circuitry.
YPAO Technology: This unit employs the YPAO (Yamaha
Parametric Acoustic Optimizer), which automatically adjusts the output of the
speakers based on placement, performance, and the room's acoustic
characteristics. Yamaha's YPAO system uses a small microphone and sophisticated
equalization to automatically set the best sound for any room, no matter where
the speakers are. First it checks the speaker connections and phase of each
speaker. Then it sends out tones which are captured by the microphone to analyze
the room acoustics and sets a variety of parameters; such as the speaker size,
the distance of the speakers, and even the volume level; until it achieves the
best sound conditions for your room. Using the supplied Optimizer Microphone, YPAO performs the
following checks and makes appropriate adjustments to give you the best possible
sound from your system:
- Speaker Wiring: Checks which speakers are connected and
the polarity of each.
- Speaker Size: Checks the frequency response of each
speaker and sets the appropriate crossover frequency for each channel.
- Speaker Distance: Checks the distance of each speaker
from the listening position and adjusts the delay of each channel.
- EQ: Each channel has a parametric equalizer; choose one
of three target settings before running the setup.
- Natural: adjusts all speaker to a natural sound;
useful when the flat setting sounds too bright
- Flat: use when all the speakers in the system have
similar sound characteristics
- Front: EQs the center and rear speakers to sound
like the front; useful when your front speakers are better than the
others in the system
- Volume Level: Checks and adjusts the volume level of
Note: You can also choose to manually adjust the AV
receiver's speaker, crossover, & EQ settings.
Multi-Channel Decoding Formats: The Yamaha RX-V475 supports
the following multi-channel (Dolby Digital, DTS, Dolby Pro Logic) decoding
Note: Dolby Digital and DTS listening modes can only be
selected if your audio source is connected to the AV receiver via a digital
audio connection (HDMI, optical, or coaxial). Even though the AV receiver
will decode 7.1ch surround sound (via HDMI), it will only output 5.1ch
surround, because it lacks Surround Back channel speaker outputs.
Surround Parameters: The Yamaha AV receiver offers the
following Dolby Pro Logic II and DTS NEO:6 audio adjustments.
- Dolby Pro Logic II Settings: You can adjust the
following parameters in Pro Logic II Music modes:
- Panorama: sends stereo signals to the surround
speakers as well as the front speakers for a wraparound effect
- Dimension: adjusts the soundfield either towards
the front or towards the rear of the room
- Center Width: moves the center channel output
completely towards the center speaker or towards the front left and
- Center Image (DTS NEO: 6 Music): This parameter adjusts
the front left and right channel output relative to the center channel to
make the center channel more or less dominant as necessary.
Cinema DSP Soundfields: Conventional multichannel audio
reproduction systems base their sound on Dolby Digital and DTS decoding, using
matrix and steering technologies to create surround sound effects. Yamaha Cinema
DSP is much more advanced, actually creating richly realized independent
soundfields that envelop you in an unmatched surround sound experience. With
dialogue, music and effects ideally located in these separate soundfields, you
will hear sound with accurate placement, smooth movement, exceptional clarity
and richness, and realistic presence. It will seem as if the walls of your room
have disappeared and you are in the middle of your own immense theater. The AV
receiver offers 17 Cinema DSP programs for movies, music, and games.
- Movie Soundfields: Standard, Spectacle, Sci-Fi, Adventure, Drama, Mono Movie
- Entertainment Soundfields: Sports, Action Game, Role
Playing Game, Music Video
- Music Soundfields: Hall Munich, Hall in Vienna,
Chamber, Cellar club, The Roxy Theater, The Bottom Line, 5ch Stereo
Note: You can
change the receiver's Cinema DSP effect level (level of the soundfield
effect to be added). You can adjust the level of the soundfield effect
from -6 dB to +3 dB.
Cinema DSP Modes: The Yamaha RX-V475 AV receiver offers
proprietary Yamaha Cinema modes so you can enjoy your movies and music even more
in your home; regardless if you are using Presence Speakers, only have a
two-channel speaker system, or listening through headphones.
- Cinema DSP 3D: The actually measured soundfield data in
recorded soundtracks contain the information of the height of the sound
images. CINEMA DSP 3D mode achieves the reproduction of the accurate height
of theses sound images so that it can create the accurate and intensive
stereoscopic soundfield in your listening room. The receiver achieves Cinema DSP 3D through its virtual Presensce Speaker mode.
- Virtual Cinema DSP: Virtual Cinema DSP is an algorithm
that allows you to enjoy DSP soundfield surround effects while using a
minimal two-speaker system. Virtual Cinema DSP lets you enjoy the effects of
Cinema DSP surround sound without using surround speakers (handy for use in
custom installations where some rooms don't have surround speakers). It can
be used with the front/center speakers or even with just the two
front left and right speakers. This unit will switch to virtual Cinema DSP
mode automatically when surround speakers are unavailable.
- Silent Cinema: Silent Cinema makes it possible to hear
large-scale surround sound through ordinary headphones. This is a variation
of Cinema DSP technology that Yamaha developed to let you listen in private
to movies and other multi-channel sources for hours without listening
Straight Decode: Straight Decode lets you play back input sources
without any soundfield effect processing. When the Straight Decode mode is
enabled, each speaker produces its own channel audio signal (without soundfield
processing). When playing back 2-channle sources, such as a CD player, stereo
sound is heard from the front speakers. When playing back multichannel sources,
the receiver produces unprocessed multichannel surround sound.
Compressed Music Enhancer: Yamaha employs sophisticated
digital signal processing with exclusive algorithms to enable playback that
improves the performance of compressed music formats, including MP3, WMA, and
AAC. With the Compressed Music Enhancer, highs and especially lows are richer
and smoother, bringing music back to life to be as close to the original as
Dynamic Range Control: The Yamaha RX-V475 employs two
Dynamic Range Control functions.
- Adaptive DRC: Adaptive DRC automatically adjusts the
dynamic range of the sound according to the volume level. This ensures that
you hear clear dialog, vocals, and all sound effects at comfortable levels.
There is no need to adjust the volume level as you listen; everything from
whispers to big explosions will be heard clearly and comfortably at the same
volume setting. It also tones down loud TV commercials and is ideal for
low-volume, late-night listening when you do not want to disturb others.
- Dynamic Range: The amount of dynamic range compression applied
to bitstream signals is adjustable; Min/Auto is suitable for low volume listening,
Standard is typical for home use, and Max doesn't compress the dynamic range at all.
Bass Management: The Yamaha RX-V475 AV receiver provides
the following Bass Management settings.
- Bass & Treble: You can adjust the balance of the
high-frequency range (Treble) and low-frequency range (Bass) of sounds
output from the receiver' front left and right speakers to obtain a desired
tone. You can independently adjust the bass (50Hz) and treble (20kHz) from
-6dB to +6dB in 0.5 dB increments. The tone control of the speakers or
headphones can be set separately.
- Extra Bass: You can select whether to play front
channel low-frequencies through either of the front speaker or the
subwoofer, or through both the subwoofer and front speakers.
- Subwoofer Trim: The Subwoofer Trim control enhances the
low frequencies by avoiding overlap with the front speaker output. This will
result in a cleaner, more focused sound stage while providing a seamless
frequency response. When subwoofer frequency overlap occurs in conventional
systems, the overall sound is "pushed" toward the subwoofer. Subwoofer Trim
takes care of this by separating the low subwoofer frequencies cleanly, thus
stabilizing the front stage while providing a well-balanced enhanced bass
Volume Setup: The Yamaha RX-V475 allows you to customize the
receiver's volume levels.
- Max Volume Adjustment: Use this feature to set the
receiver's maximum volume level. This feature is useful to avoid turning the
volume too loud by mistake. You can set the Max Volume from -30 dB to +15 dB
in 5 dB steps, or to +16.5 dB (full volume range is -80 dB to +16.5 dB).
- Initial Volume Setting: Use this feature to set the
volume level when the power is turned on. You can choose between Off (same
as the volume when the unit was turned off), Mute, and -80 dB to + 16.5 dB
in increments of 0.5 dB.
Audio Inputs/Outputs: The Yamaha RX-V475 offers a variety of
analog and digital audio inputs/outputs.
- Digital Inputs: The Yamaha AV receiver is equipped with two
optical digital inputs (AV-1/AV-4) and two coaxial digital inputs (AV-2/AV-3).
- Stereo RCA Jacks: The receiver is also equipped with
three stereo RCA analog audio inputs and a stereo RCA analog audio record
- Speaker Terminals: The receiver has binding post
terminals for all the speaker outputs. The binding posts can accept bare
wire, pin connectors, and single banana plugs. The terminals are spaced too
far apart for dual banana plugs and a collar surrounding them prevents the
use of spade connectors. You can select 8 ohms or 6 ohms in the menu
depending on your speaker application. The amplifier supports 4- to 8-ohm
Front speakers, and 6- to 8-ohm Center and Surround speakers.
- Headphone Jack: The Yamaha RX-V475 is equipped with a front-panel 1/4"
headphone jack for connecting a set of headphone, so you can listen to your
music privately. Connecting a set of headphones automatically mutes the
receiver's speaker outputs. Sound effects applied during playback can also
be heard through the headphones.
- Aux Input: The receiver features a front-panel minijack (3.5mm)
audio input for connecting an external audio source temporarily.
HDMI (v.1.4): The Yamaha RXV475 AV receiver is fitted with 5 HDMI (v.1.4) inputs and 1 HDMI (v.1.4 outputs) to deliver crystal-clear,
all-digital audio and video signals. The HDMI 1.4 jacks support 1080p and 4K video
signals; as well as 3D video and ARC functionality. Deep Color (30/36 bit), x.v.Color,
and auto Lip-Sync compensation is also supported via HDMI. The AV receiver's
HDMI jacks support 2-channel and multi-channel linear PCM (up to 8-channel) and
Bitstream (Dolby Digital, DTS, etc) digital audio formats.
- 4K Pass Through: 4K Pass Through allows the Yamaha RX-V475 to receive
super high-definition resolution video and pass the video signal to a 4K
compatible TV or display monitor. This ensures compatibility with the latest
super high resolution video formats.
- 3D Ready: The Yamaha RX-V475 AV receiver supports 3D HDMI
pass-through from connected 3D-compatible Blu-ray, games and broadcast devices
to 3D-compatible HDTVs (all 3D components must be connected via HDMI). 3D
provides a more engaging audio and video consumer experience. Note that special
eyewear may be required for viewing 3D content
- ARC (Audio Return Channel): This feature allows audio to be
sent from your compatible HDTV to your receiver through the same HDMI cable
already being used to send audio and video to your HDTV. This eliminates the
need for extra cables connected to your television.
- Deep/x.v.Color Support: The AV receiver supports Deep
Color and x.v.Color content, which can display a larger color range than
standard-definition schemes. The result is a more lifelike, vibrant picture
- LipSync: This function
adjusts the delay between audio and video output. You can do this manually or
have the receiver set the LipSync function automatically. When connected
to a TV via HDMI the receiver automatically adjusts audio output timing (0-250ms) if the
TV supports an automatic LipSync function. You can also manually delay the
sound output up to 250ms to synchronize it with the video image.
MHL-Compatible HDMI Port: The HDMI 5 is MHL compatible. This MHL compatible HDMI port
provides easy, direct connection of MHL compatible smartphones. Playback of up
to 1080p video and multi-channel audio from the phone is supported. The receiver
will also charge your connected phone. Play, Stop, and other basic operations
can be controlled from the AV receiver's remote control.
HDMI Standby Through Mode: When the RX-V475 is in standby
mode (power off), the Standby Through feature allows HDMI source signals to pass
through the receiver to the TV. The HDMI input can be changed using the remote
control. So, there's not need to turn on the A/V receiver in order to switch
Analog Video: The RX-V475 AV receiver offers both composite
and component analog video jacks.
- Component Video: The RX-V475 offers two component video inputs
and one component video monitor output. These jacks have a frequency
response of 5 Hz to 60 MHz and will pass High Definition video sources up to
- Composite: The receiver features four composite video inputs
(3 rear/1 front),
one composite video record output, and one composite video monitor output.
Background Video: The Background Video feature allows you to
watch a video source while listening to a different audio source. With the
RX-V475, you can select any video input, and listen to AM/FM radio or select
songs from a USB device at the same time.
Network & Tuner Functions
Ethernet LAN Port (optional WiFi): The Yamaha AV receiver is
fitted with a RJ-45 Ethernet (LAN) port to connect the receiver to your home
network to access your DLNA music server, or Internet Radio. There is also a
rear-panel USB type-A port (5V/0.5A) that allows you to connect Yamaha's YWA-10
wireless network adapter (022YWA10,
sold separately) for a wireless network connection.
DLNA 1.5/Windows 7 Certified: The RX-V475 is DLNA (Digital
Living Network Alliance) 1.5 and Windows 7 compliant for audio networking. This
means it's easier for you to access and enjoy digital music stored on your PC.
You can use your PC to play high-bit rate music content through your audio
system, or use the RX-V475 to browse and play music files on your hard drive.
Media Player: The Yamaha RX-V475 lets you play music files
stored on your computer via a network connection. MP3 (up to 48kHz/320kbps), WMA
(up to 48kHz/320kbps), AAC (up to 48kHz/320kbps), WAV (up to 192kHz/24-bit), and FLAC (up to
192kHz/24-bit) audio files stored on your computer can be played
through the RX-V475 via its network connection. You can control playback
of your streamed audio files from the AV receiver's remote control. The receiver
also supports ID3-Tag and META tag information so song title, artist name, and
album name can be displayed from the unit's on-screen menu (via HDMI). This unit
can play back music files stored on the following music servers:
- PC with Windows Media Player 11 or later installed
- PC with DLNA/UPnP Certificate server software installed
- NAS with DLNA/UPnP certification
Internet Radio: The Yamaha RX-V475's network connection provides
access to Pandora and vTuner Internet Radio. You can control the Internet Radio
services from the AV receiver's remote control and on-screen menu (via HDMI).
The receiver will display station name, album name, song title, and elapsed time
on your HDMI-connected television.
Pandora is free, personalized radio that plays music and comedy you'll
love. Just start with the name of one of your favorite artists, songs,
comedians or composers and Pandora will create a custom station that plays
similar tracks. You can also rate (thumbs up/thumbs down) songs as they
play, and Pandora will adapt stations to your feedback. You can even
bookmark up to 100 stations and easily switch between
- vTuner: You can also isten to Internet radio stations using the
vTuner Internet Radio Station database service particularly customized for
this unit, providing a database of numerous radio stations around the world.
You can search for Internet Radio stations by Location, Genre, New, Popular,
AM/FM Tuner: The Yamaha RX-V475 AV receiver features a
built-in AM/FM tuner with manual, seek, and preset tuning. The RX-V475 lets you
store up to 40 AM/FM station presets. This can be done manually or automatically
(auto-preset tuning). You can set this receiver to automatically match FM
broadcast frequencies in stereo, or convert the frequency to monaural for weaker
stations. An indoor FM wire antenna and AM loop antenna are included with the
Web Control: When connected to your network (with Internet
connection), you can control the Yamaha AV receiver with the web control screen
displayed in your PC's web browser. You'll be able to control functions such as,
Power On/Off & Volume. Internet Explorer 7.x, 8.x, 9.x is recommended for web
Firmware Updates: New firmware will be released for the
purpose of additional features or product improvements. Firmware updates can be
downloaded from the Yamaha website. If this unit is connected to the Internet,
the receiver will indicate when a new firmware version is available and you can
download the firmware via the network connection. Firmware updates normally take
approximately 20 minutes or longer. The test A/V receiver contained firmware
version 1.02 and had an immediate firmware version 1.05 update (as of
Yamaha's Support Download Site
for the most recent firmware updates.
USB Port: This AV receiver is equipped with a front-panel USB
(type-A) port that allows you to enjoy MP3 (up to 48kHz/320kbps), WMA (up to
48kHz/320kbps), AAC (up to 48kHz/320kbps), WAV (up to 192kHz/24-bit), and FLAC (up to
from a USB mass storage class memory device; such as your Android smartphone, portable MP3 player or
USB thumbdrive (not compatible with USB HDDs).
Your USB mass storage class device must be formatted in FAT 16
or FAT32 . You can use the receiver's on-screen menu (via HDMI) and remote
control to navigate your stored music files on your connected USB memory device.
USB portable audio players that can be charged via USB will be charged when
plugged into the AV receiver's USB port (5V/1A); even in standby mode.
Note: While listening to a song from a USB device, you can view a
favorite video or photo from the receiver's monitor output.
AirPlay: This AV receiver supports AirPlay, which means it
can accept wireless music streaming from your iPod touch, iPhone or iPad; as
well as from iTunes on Macs or PCs. This makes it easy to enjoy your iTunes
music from your mobile Apple iOS device or computer on your home theater system.
You can even view metadata such as song title, artist name, as well as album art
via AV receiver's on-screen display. In addition, you can download
Apple's free "Remote" application and use your Apple device as the remote
control for your iTunes account.
Note: To use the AirPlay feature you need a Mac or
Windows-based PC running iTunes (10.2.2 or later) connected to your wireless
home network. Your iPod touch, iPhone, and iPad must have iOS 4.3.3 or later
installed and connected to the same wireless home network.
iPod/iPhone Direct: The USB (type-A) port on the front-panel provides
convenient connection for your iPod/iPhone so you can listen to your stored
music and music apps through the Yamaha AV receiver. The iPod/iPhone USB digital connection means that the digital audio signal from
iPod/iPhone is transmitted directly to the system, minimizing noise interference
and allowing use of the receiver's DAC, not the DAC in your iPod/iPhone. This
results in more precise sound reproduction. You can navigate your iPod/iPhone's
music via the receiver's on-screen menu (via HDMI) and remote control, or
continue to use your iPod/iPhone's clickwheel or touchscreen. You can browse
your iPod/iPhone's stored music content via Playlist, Artist, Album, Song, Genre, or
Composer. You can also control Repeat & Shuffle functions. Basic playback
functions (such as Play/Pause, Previous/Next Track) for music apps can also be
controlled by the AV receiver's remote. Song/artist
information from stored music and music apps on your iPod/iPhone will display on your connected TV (via HDMI) or the
unit's front-panel display. Your
iPod/iPhone's battery will be charged while connected to the receiver (max. 2.1A). Using the Lightning- or Dock-cable that came with your Apple
device to connect directly to the Yamaha AV receiver, iPod/iPhone compatibility
is as follows (as of 9/24/2013):
| Apple Device || Generation || Tested Version || Connector Type || Media Type || Control Type || Display Type || Charge |
AirPlay || Audio || Video || Remote || iPod/iPhone || Album Art || Artist/Song Text || Track Info |
| iPad || 1 || 5.1.1 || Y || Y || Y || N || Y || Y || N || Y || Y || Y |
| 2 || 7.0 || Y || Y || Y || N || Y || Y || N || Y || Y || Y |
| 3 || 7.0 || Y || Y || Y || N || Y || Y || N || Y || Y || Y |
| 4 || 7.0 || Y || Y || Y || N || Y || Y || N || Y || Y || Y |
| mini || 7.0 || Y || Y || Y || N || Y || Y || N || Y || Y || Y |
| iPhone || 2G || 3.1.3 || Y || N || Y || N || Y || Y || N || Y || Y || Y |
| 3G || 4.2.1 || Y || N || Y || N || Y || Y || N || Y || Y || Y |
| 3GS || 5.1.1 || Y || Y || Y || N || Y || Y || N || Y || Y || Y |
| 4 || 7.0 || Y || Y || Y || N || Y || Y || N || Y || Y || Y |
| 4S || 7.0 || Y || Y || Y || N || Y || Y || N || Y || Y || Y |
| 5 || 7.0 || Y || Y || Y || N || Y || Y || N || Y || Y || Y |
| 5C || 7.0 || Y || Y || Y || N || Y || Y || N || Y || Y || Y |
| 5S || 7.0 || Y || Y || Y || N || Y || Y || N || Y || Y || Y |
| touch || 1st || 2.2.1 || Y || N || Y || N || Y || Y || N || Y || Y || Y |
| 2nd || 4.2.1 || Y || N || Y || N || Y || Y || N || Y || Y || Y |
| 3rd || 5.1.1 || Y || Y || Y || N || Y || Y || N || Y || Y || Y |
| 4th || 6.1.2 || Y || Y || Y || N || Y || Y || N || Y || Y || Y |
| 5th || 7.0 || Y || Y || Y || N || Y || Y || N || Y || Y || Y |
| nano || 1st || 1.3.1 || Y || N || Y || N || Y || N || N || Y || Y || Y |
| 2nd || 1.1.3 || Y || N || Y || N || Y || Y || N || Y || Y || Y |
| 3rd || 1.1.3 || Y || N || Y || N || Y || Y || N || Y || Y || Y |
| 4th || 1.0.4 || Y || N || Y || N || Y || Y || N || Y || Y || Y |
| 5th || 1.0.2 || Y || N || Y || N || Y || Y || N || Y || Y || Y |
| 6th || 1.2 PC || Y || N || Y || N || Y || Y || N || Y || Y || Y |
| 7th || 1.02 PC || Y || N || Y || N || Y || Y || N || Y || Y || Y |
| classic || 80GB || 1.1.2 || Y || N || Y || N || Y || Y || N || Y || Y || Y |
| 120GB || 2.0.1 || Y || N || Y || N || Y || Y || N || Y || Y || Y |
| 160GB || 2.0.4 || Y || N || Y || N || Y || Y || N || Y || Y || Y |
| video || 5th || 1.3 || Y || N || Y || N || Y || N || N || Y || Y || Y |
Note: Apple iPod/iPhone software updates may change
functionality results. If you download a newer software version, you may
need to reset the unit and your iPod/iPhone to regain functionality. If this
doesn't work, you may need to wait until a newer software update is
The RX-V475 offers an on-screen menu system via its HDMI output. This clean and
simple interface makes setup and other operations extremely easy. If your TV is
connected to the composite video or component video monitor output, you will
need to use the AV receiver's front-panel display when changing settings. You can set the receiver's on-screen menu language to English,
French, Spanish, German, Russian, or Chinese.
Scene (for One-Touch Start): The RX-V475 features four Scene buttons on the front panel
and remote to make operating the receiver easier. These buttons are initially set to
default settings for Blu-ray/DVD viewing, TV viewing, Internet Radio listening, and
AM/FM Radio listening.
Each can be reprogrammed to any input and any soundfield. Pressing a Scene
button will automatically launch a number of operations that initiate play of
the source controlled by that button. Other Scene settings are also available,
such as iPod Listening, TV Sports Viewing, and Action Game Playing. Browsing and
selecting the settings is quickly accomplished by changing Input via the front
panel and watching the on-screen display. The settings can be selected for
one-time use, or they can replace the original default settings. The Scene names
can also be changed.
Input Rename: You can rename each input so the display reflects
the actual source; choose from 15 templates or create an original name, up to
Display Dimmer: You can set the brightness of the front-panel display
from -4 to 0.
ECO Mode: When the ECO Mode is enabled, you can reduce the receiver'
power consumption by keeping the maximum volume, maximum output power, and front
display's brightness low. ECO mode reduces power consumption by approximately
Timers: The receiver offers a programmable Sleep Timer and
Auto Power Down function.
- Sleep Timer: The receiver's Sleep Timer function can be set
turn the unit automatically off after 30, 60, 90, or 120 minutes.
- Auto Power Down: If you don't operate the receiver or use the remote
for an extended period of time, the unit will automatically go into standby mode
(Auto Power Down function). The Auto Power Down feature is selectable from 2, 4, 8 or
Memory Guard: This feature is used to prevent accidental changes
to the DSP program parameter values and other system settings.
IR Remote Control: The receiver comes with an IR remote
control for wireless operation of this receiver and other HDMI-connected sources
(via HDMI CEC). In addition to the receiver, the remote can be programmed to
control multiple brands of TVs, Blu-ray players, DVD players/recorders, DVRs,
HDMI Control: The Yamaha AV receiver supports the HDMI control
function, which allows you to operate external components via HDMI. If your TV
or other external components support HDMI control, you can use the remote
controls of those devices to operate some of this unit's functions, and to
synchronize this unit with the operation of those devices. You can use the
following operations with the remote control of any of the connected HDMI
Control compatible devices.
- Power synchronization (On/Standby)
- Volume control, including Mute
- Changing the volume of the audio output signal device (either the TV or
AV Controller App: This AV Controller App (free) will turn
your iPod touch, iPhone, iPad or Android device into a Wi-Fi enabled remote
control for the Yamaha AV receiver. This App provides the flexibility to control
input, volume, mute and power commands. You can browse content from all
internally available sources such as Internet Radio, USB and AM/FM tuners. You
can also control all AV receiver zones such as powering on and changing input
for each zone. This App not only controls the Yamaha AV receiver, it also
controls Yamaha Blu-ray Disc Players, supporting various functions including
Play, Stop and Forward. In addition, you can browse music stored on your Apple
iOS or Android device and wirelessly transfer the content to the Yamaha A/V
receiver for playback.
- AV Controller App for Apple: The free
AV controller App for Apple is available for download from the Apple
iTunes App Store. It supports the iPod touch, iPhone , or iPad with iOS 4.2
or higher installed.
- AV Controller App for Android: The free
AV controller App for Android is available for download from the online
Google Play. Requires Android 2.1 and up.
Note: You must have a wireless network in your home and the
Yamaha AV receiver & Apple or Android device connected to the same network.