Audio Features
Video Features
Network & Tuner Functions
USB/iPod Integration
Convenience Features
Remote Control

Audio Features

Yamaha's Total Purity Concept: The Yamaha RX-V475 AV Receiver incorporates Yamaha's Total Purity Concept for the finest sound quality. The Total Purity Concept, which Yamaha has been cultivating for many years, encompasses high drive amp technology, high purity pre-amplification, anti-vibration technology, and independent pure power supplies. As a result, this AV receiver can provide high-quality sound for your movie & music soundtracks.

• High Drive Amp Technology: A fully discrete power amplifier helps maximize sound and minimize distortion of the receiver. The Yamaha RX-V475 AV Receiver is equipped with a 5-channel amplifier rated at 80 watts (into 8-ohms, at 20-20kHz, with 0.09% THD, driving 2 channels) which provides high dynamic power with low-impedance drive capability.
• High Purity Pre-Amplification: The Yamaha RX-V475 uses high quality, audio-grade Burr-Brown 192kHz/24-bit digital-to-analog converters for all channels to maximize sound quality. The AV receiver also utilizes low-jitter PLL circuitry to help optimize sound imaging. The result is a more dynamic sound with greater detail and less distortion.
• Anti-Vibration Technology: The AV receiver's anti-vibration heatsinks suppress vibration from transistors and sound pressure.
• Independent Power Supplies: Independent power supplies are used for the receiver's analog and digital circuitry to prevent digital noise from affecting analog circuitry.

YPAO Technology: This unit employs the YPAO (Yamaha Parametric Acoustic Optimizer), which automatically adjusts the output of the speakers based on placement, performance, and the room's acoustic characteristics. Yamaha's YPAO system uses a small microphone and sophisticated equalization to automatically set the best sound for any room, no matter where the speakers are. First it checks the speaker connections and phase of each speaker. Then it sends out tones which are captured by the microphone to analyze the room acoustics and sets a variety of parameters; such as the speaker size, the distance of the speakers, and even the volume level; until it achieves the best sound conditions for your room. Using the supplied Optimizer Microphone, YPAO performs the following checks and makes appropriate adjustments to give you the best possible sound from your system:

• Speaker Wiring: Checks which speakers are connected and the polarity of each.
• Speaker Size: Checks the frequency response of each speaker and sets the appropriate crossover frequency for each channel.
• Speaker Distance: Checks the distance of each speaker from the listening position and adjusts the delay of each channel.
• EQ: Each channel has a parametric equalizer; choose one of three target settings before running the setup.
  • Natural: adjusts all speaker to a natural sound; useful when the flat setting sounds too bright
  • Flat: use when all the speakers in the system have similar sound characteristics
  • Front: EQs the center and rear speakers to sound like the front; useful when your front speakers are better than the others in the system
• Volume Level: Checks and adjusts the volume level of each speaker.

Multi-Channel Decoding Formats: The Yamaha RX-V475 supports the following multi-channel (Dolby Digital, DTS, Dolby Pro Logic) decoding formats.

• Dolby Digital: Dolby Digital, Dolby Digital Plus, Dolby TrueHD
• DTS: DTS, DTS-HD Master Audio, DTS-HD High Resolution, DTS Express, DTS 96/24, DTS Neo: 6
• Dolby Pro Logic: Dolby Pro Logic II

Surround Parameters: The Yamaha AV receiver offers the following Dolby Pro Logic II and DTS NEO:6 audio adjustments.

• Dolby Pro Logic II Settings: You can adjust the following parameters in Pro Logic II Music modes:
  • Panorama: sends stereo signals to the surround speakers as well as the front speakers for a wraparound effect 
  • Dimension: adjusts the soundfield either towards the front or towards the rear of the room
  • Center Width: moves the center channel output completely towards the center speaker or towards the front left and right speakers
• Center Image (DTS NEO: 6 Music): This parameter adjusts the front left and right channel output relative to the center channel to make the center channel more or less dominant as necessary.

Cinema DSP Soundfields: Conventional multichannel audio reproduction systems base their sound on Dolby Digital and DTS decoding, using matrix and steering technologies to create surround sound effects. Yamaha Cinema DSP is much more advanced, actually creating richly realized independent soundfields that envelop you in an unmatched surround sound experience. With dialogue, music and effects ideally located in these separate soundfields, you will hear sound with accurate placement, smooth movement, exceptional clarity and richness, and realistic presence. It will seem as if the walls of your room have disappeared and you are in the middle of your own immense theater. The AV receiver offers 17 Cinema DSP programs for movies, music, and games.

• Movie Soundfields: Standard, Spectacle, Sci-Fi, Adventure, Drama, Mono Movie
• Entertainment Soundfields: Sports, Action Game, Role Playing Game, Music Video
• Music Soundfields: Hall Munich, Hall in Vienna, Chamber, Cellar club, The Roxy Theater, The Bottom Line, 5ch Stereo

Cinema DSP Modes: The Yamaha RX-V475 AV receiver offers proprietary Yamaha Cinema modes so you can enjoy your movies and music even more in your home; regardless if you are using Presence Speakers, only have a two-channel speaker system, or listening through headphones.

• Cinema DSP 3D: The actually measured soundfield data in recorded soundtracks contain the information of the height of the sound images. CINEMA DSP 3D mode achieves the reproduction of the accurate height of theses sound images so that it can create the accurate and intensive stereoscopic soundfield in your listening room. The receiver achieves Cinema DSP 3D through its virtual Presensce Speaker mode.
• Virtual Cinema DSP: Virtual Cinema DSP is an algorithm that allows you to enjoy DSP soundfield surround effects while using a minimal two-speaker system. Virtual Cinema DSP lets you enjoy the effects of Cinema DSP surround sound without using surround speakers (handy for use in custom installations where some rooms don't have surround speakers). It can be used with the front/center speakers or even with just the two front left and right speakers. This unit will switch to virtual Cinema DSP mode automatically when surround speakers are unavailable.
• Silent Cinema: Silent Cinema makes it possible to hear large-scale surround sound through ordinary headphones. This is a variation of Cinema DSP technology that Yamaha developed to let you listen in private to movies and other multi-channel sources for hours without listening fatigue.

Straight Decode: Straight Decode lets you play back input sources without any soundfield effect processing. When the Straight Decode mode is enabled, each speaker produces its own channel audio signal (without soundfield processing). When playing back 2-channle sources, such as a CD player, stereo sound is heard from the front speakers. When playing back multichannel sources, the receiver produces unprocessed multichannel surround sound.

Compressed Music Enhancer: Yamaha employs sophisticated digital signal processing with exclusive algorithms to enable playback that improves the performance of compressed music formats, including MP3, WMA, and AAC. With the Compressed Music Enhancer, highs and especially lows are richer and smoother, bringing music back to life to be as close to the original as possible.

Dynamic Range Control: The Yamaha RX-V475 employs two Dynamic Range Control functions.

• Adaptive DRC: Adaptive DRC automatically adjusts the dynamic range of the sound according to the volume level. This ensures that you hear clear dialog, vocals, and all sound effects at comfortable levels. There is no need to adjust the volume level as you listen; everything from whispers to big explosions will be heard clearly and comfortably at the same volume setting. It also tones down loud TV commercials and is ideal for low-volume, late-night listening when you do not want to disturb others.
• Dynamic Range: The amount of dynamic range compression applied to bitstream signals is adjustable; Min/Auto is suitable for low volume listening, Standard is typical for home use, and Max doesn't compress the dynamic range at all.

Bass Management: The Yamaha RX-V475 AV receiver provides the following Bass Management settings.

• Bass & Treble: You can adjust the balance of the high-frequency range (Treble) and low-frequency range (Bass) of sounds output from the receiver' front left and right speakers to obtain a desired tone. You can independently adjust the bass (50Hz) and treble (20kHz) from -6dB to +6dB in 0.5 dB increments. The tone control of the speakers or headphones can be set separately.
• Extra Bass: You can select whether to play front channel low-frequencies through either of the front speaker or the subwoofer, or through both the subwoofer and front speakers.
• Subwoofer Trim: The Subwoofer Trim control enhances the low frequencies by avoiding overlap with the front speaker output. This will result in a cleaner, more focused sound stage while providing a seamless frequency response. When subwoofer frequency overlap occurs in conventional systems, the overall sound is "pushed" toward the subwoofer. Subwoofer Trim takes care of this by separating the low subwoofer frequencies cleanly, thus stabilizing the front stage while providing a well-balanced enhanced bass sound.

Volume Setup: The Yamaha RX-V475 allows you to customize the receiver's volume levels.

• Max Volume Adjustment: Use this feature to set the receiver's maximum volume level. This feature is useful to avoid turning the volume too loud by mistake. You can set the Max Volume from -30 dB to +15 dB in 5 dB steps, or to +16.5 dB (full volume range is -80 dB to +16.5 dB).
• Initial Volume Setting: Use this feature to set the volume level when the power is turned on. You can choose between Off (same as the volume when the unit was turned off), Mute, and -80 dB to + 16.5 dB in increments of 0.5 dB.

Audio Inputs/Outputs: The Yamaha RX-V475 offers a variety of analog and digital audio inputs/outputs.

• Digital Inputs: The Yamaha AV receiver is equipped with two optical digital inputs (AV-1/AV-4) and two coaxial digital inputs (AV-2/AV-3).
• Stereo RCA Jacks: The receiver is also equipped with three stereo RCA analog audio inputs and a stereo RCA analog audio record output.
• Speaker Terminals: The receiver has binding post terminals for all the speaker outputs. The binding posts can accept bare wire, pin connectors, and single banana plugs. The terminals are spaced too far apart for dual banana plugs and a collar surrounding them prevents the use of spade connectors. You can select 8 ohms or 6 ohms in the menu depending on your speaker application. The amplifier supports 4- to 8-ohm Front speakers, and 6- to 8-ohm Center and Surround speakers.
• Headphone Jack: The Yamaha RX-V475 is equipped with a front-panel 1/4" headphone jack for connecting a set of headphone, so you can listen to your music privately. Connecting a set of headphones automatically mutes the receiver's speaker outputs. Sound effects applied during playback can also be heard through the headphones.
• Aux Input: The receiver features a front-panel minijack (3.5mm) audio input for connecting an external audio source temporarily.

Video Features

HDMI (v.1.4): The Yamaha RXV475 AV receiver is fitted with 5 HDMI (v.1.4) inputs and 1 HDMI (v.1.4 outputs) to deliver crystal-clear, all-digital audio and video signals. The HDMI 1.4 jacks support 1080p and 4K video signals; as well as 3D video and ARC functionality. Deep Color (30/36 bit), x.v.Color, and auto Lip-Sync compensation is also supported via HDMI. The AV receiver's HDMI jacks support 2-channel and multi-channel linear PCM (up to 8-channel) and Bitstream (Dolby Digital, DTS, etc) digital audio formats.

• 4K Pass Through: 4K Pass Through allows the Yamaha RX-V475 to receive super high-definition resolution video and pass the video signal to a 4K compatible TV or display monitor. This ensures compatibility with the latest super high resolution video formats.
• 3D Ready: The Yamaha RX-V475 AV receiver supports 3D HDMI pass-through from connected 3D-compatible Blu-ray, games and broadcast devices to 3D-compatible HDTVs (all 3D components must be connected via HDMI). 3D provides a more engaging audio and video consumer experience. Note that special eyewear may be required for viewing 3D content
• ARC (Audio Return Channel): This feature allows audio to be sent from your compatible HDTV to your receiver through the same HDMI cable already being used to send audio and video to your HDTV. This eliminates the need for extra cables connected to your television.
• Deep/x.v.Color Support: The AV receiver supports Deep Color and x.v.Color content, which can display a larger color range than standard-definition schemes. The result is a more lifelike, vibrant picture
• LipSync: This function adjusts the delay between audio and video output. You can do this manually or have the receiver set the LipSync function automatically. When connected to a TV via HDMI the receiver automatically adjusts audio output timing (0-250ms) if the TV supports an automatic LipSync function. You can also manually delay the sound output up to 250ms to synchronize it with the video image.

MHL-Compatible HDMI Port: The HDMI 5 is MHL compatible. This MHL compatible HDMI port provides easy, direct connection of MHL compatible smartphones. Playback of up to 1080p video and multi-channel audio from the phone is supported. The receiver will also charge your connected phone. Play, Stop, and other basic operations can be controlled from the AV receiver's remote control.

HDMI Standby Through Mode: When the RX-V475 is in standby mode (power off), the Standby Through feature allows HDMI source signals to pass through the receiver to the TV. The HDMI input can be changed using the remote control. So, there's not need to turn on the A/V receiver in order to switch HDMI sources.

Analog Video: The RX-V475 AV receiver offers both composite and component analog video jacks.

• Component Video: The RX-V475 offers two component video inputs and one component video monitor output. These jacks have a frequency response of 5 Hz to 60 MHz and will pass High Definition video sources up to 1080p.
• Composite: The receiver features four composite video inputs (3 rear/1 front), one composite video record output, and one composite video monitor output.

Background Video: The Background Video feature allows you to watch a video source while listening to a different audio source. With the RX-V475, you can select any video input, and listen to AM/FM radio or select songs from a USB device at the same time.

Network & Tuner Functions

Ethernet LAN Port (optional WiFi): The Yamaha AV receiver is fitted with a RJ-45 Ethernet (LAN) port to connect the receiver to your home network to access your DLNA music server, or Internet Radio. There is also a rear-panel USB type-A port (5V/0.5A) that allows you to connect Yamaha's YWA-10 wireless network adapter (022YWA10, sold separately) for a wireless network connection.

DLNA 1.5/Windows 7 Certified: The RX-V475 is DLNA (Digital Living Network Alliance) 1.5 and Windows 7 compliant for audio networking. This means it's easier for you to access and enjoy digital music stored on your PC. You can use your PC to play high-bit rate music content through your audio system, or use the RX-V475 to browse and play music files on your hard drive.

Media Player: The Yamaha RX-V475 lets you play music files stored on your computer via a network connection. MP3 (up to 48kHz/320kbps), WMA (up to 48kHz/320kbps), AAC (up to 48kHz/320kbps), WAV (up to 192kHz/24-bit), and FLAC (up to 192kHz/24-bit) audio files stored on your computer can be played through the RX-V475 via its network connection. You can control playback of your streamed audio files from the AV receiver's remote control. The receiver also supports ID3-Tag and META tag information so song title, artist name, and album name can be displayed from the unit's on-screen menu (via HDMI). This unit can play back music files stored on the following music servers:

• PC with Windows Media Player 11 or later installed
• PC with DLNA/UPnP Certificate server software installed
• NAS with DLNA/UPnP certification

Internet Radio: The Yamaha RX-V475's network connection provides access to Pandora and vTuner Internet Radio. You can control the Internet Radio services from the AV receiver's remote control and on-screen menu (via HDMI). The receiver will display station name, album name, song title, and elapsed time on your HDMI-connected television.

• Pandora: Pandora is free, personalized radio that plays music and comedy you'll love. Just start with the name of one of your favorite artists, songs, comedians or composers and Pandora will create a custom station that plays similar tracks. You can also rate (thumbs up/thumbs down) songs as they play, and Pandora will adapt stations to your feedback. You can even bookmark up to 100 stations and easily switch between favorites.
• vTuner: You can also isten to Internet radio stations using the vTuner Internet Radio Station database service particularly customized for this unit, providing a database of numerous radio stations around the world. You can search for Internet Radio stations by Location, Genre, New, Popular, or Podcast.

AM/FM Tuner: The Yamaha RX-V475 AV receiver features a built-in AM/FM tuner with manual, seek, and preset tuning. The RX-V475 lets you store up to 40 AM/FM station presets. This can be done manually or automatically (auto-preset tuning). You can set this receiver to automatically match FM broadcast frequencies in stereo, or convert the frequency to monaural for weaker stations. An indoor FM wire antenna and AM loop antenna are included with the receiver.

Web Control: When connected to your network (with Internet connection), you can control the Yamaha AV receiver with the web control screen displayed in your PC's web browser. You'll be able to control functions such as, Power On/Off & Volume. Internet Explorer 7.x, 8.x, 9.x is recommended for web browser.

Firmware Updates: New firmware will be released for the purpose of additional features or product improvements. Firmware updates can be downloaded from the Yamaha website. If this unit is connected to the Internet, the receiver will indicate when a new firmware version is available and you can download the firmware via the network connection. Firmware updates normally take approximately 20 minutes or longer. The test A/V receiver contained firmware version 1.02 and had an immediate firmware version 1.05 update (as of 3/29/2013). Check Yamaha's Support Download Site for the most recent firmware updates.

USB/iPod Integration

USB Port: This AV receiver is equipped with a front-panel USB (type-A) port that allows you to enjoy MP3 (up to 48kHz/320kbps), WMA (up to 48kHz/320kbps), AAC (up to 48kHz/320kbps), WAV (up to 192kHz/24-bit), and FLAC (up to 192kHz/24-bit) music files from a USB mass storage class memory device; such as your Android smartphone, portable MP3 player or USB thumbdrive (not compatible with USB HDDs). Your USB mass storage class device must be formatted in FAT 16 or FAT32 . You can use the receiver's on-screen menu (via HDMI) and remote control to navigate your stored music files on your connected USB memory device. USB portable audio players that can be charged via USB will be charged when plugged into the AV receiver's USB port (5V/1A); even in standby mode.

AirPlay: This AV receiver supports AirPlay, which means it can accept wireless music streaming from your iPod touch, iPhone or iPad; as well as from iTunes on Macs or PCs. This makes it easy to enjoy your iTunes music from your mobile Apple iOS device or computer on your home theater system. You can even view metadata such as song title, artist name, as well as album art via AV receiver's on-screen display. In addition, you can download Apple's free "Remote" application and use your Apple device as the remote control for your iTunes account.

iPod/iPhone Direct: The USB (type-A) port on the front-panel provides convenient connection for your iPod/iPhone so you can listen to your stored music and music apps through the Yamaha AV receiver. The iPod/iPhone USB digital connection means that the digital audio signal from your iPod/iPhone is transmitted directly to the system, minimizing noise interference and allowing use of the receiver's DAC, not the DAC in your iPod/iPhone. This results in more precise sound reproduction. You can navigate your iPod/iPhone's music via the receiver's on-screen menu (via HDMI) and remote control, or continue to use your iPod/iPhone's clickwheel or touchscreen. You can browse your iPod/iPhone's stored music content via Playlist, Artist, Album, Song, Genre, or Composer. You can also control Repeat & Shuffle functions. Basic playback functions (such as Play/Pause, Previous/Next Track) for music apps can also be controlled by the AV receiver's remote. Song/artist information from stored music and music apps on your iPod/iPhone will display on your connected TV (via HDMI) or the unit's front-panel display. Your iPod/iPhone's battery will be charged while connected to the receiver (max. 2.1A). Using the Lightning- or Dock-cable that came with your Apple device to connect directly to the Yamaha AV receiver, iPod/iPhone compatibility is as follows (as of 9/24/2013):

Convenience Features

On-Screen Menu: The RX-V475 offers an on-screen menu system via its HDMI output. This clean and simple interface makes setup and other operations extremely easy. If your TV is connected to the composite video or component video monitor output, you will need to use the AV receiver's front-panel display when changing settings. You can set the receiver's on-screen menu language to English, French, Spanish, German, Russian, or Chinese.

Scene (for One-Touch Start): The RX-V475 features four Scene buttons on the front panel and remote to make operating the receiver easier. These buttons are initially set to default settings for Blu-ray/DVD viewing, TV viewing, Internet Radio listening, and AM/FM Radio listening. Each can be reprogrammed to any input and any soundfield. Pressing a Scene button will automatically launch a number of operations that initiate play of the source controlled by that button. Other Scene settings are also available, such as iPod Listening, TV Sports Viewing, and Action Game Playing. Browsing and selecting the settings is quickly accomplished by changing Input via the front panel and watching the on-screen display. The settings can be selected for one-time use, or they can replace the original default settings. The Scene names can also be changed.

Input Rename: You can rename each input so the display reflects the actual source; choose from 15 templates or create an original name, up to nine characters.

Display Dimmer: You can set the brightness of the front-panel display from -4 to 0.

ECO Mode: When the ECO Mode is enabled, you can reduce the receiver' power consumption by keeping the maximum volume, maximum output power, and front display's brightness low. ECO mode reduces power consumption by approximately 20%.

Timers: The receiver offers a programmable Sleep Timer and Auto Power Down function.

• Sleep Timer: The receiver's Sleep Timer function can be set turn the unit automatically off after 30, 60, 90, or 120 minutes.
• Auto Power Down: If you don't operate the receiver or use the remote for an extended period of time, the unit will automatically go into standby mode (Auto Power Down function). The Auto Power Down feature is selectable from 2, 4, 8 or 12 hours.

Memory Guard: This feature is used to prevent accidental changes to the DSP program parameter values and other system settings.

Remote Control

IR Remote Control: The receiver comes with an IR remote control for wireless operation of this receiver and other HDMI-connected sources (via HDMI CEC). In addition to the receiver, the remote can be programmed to control multiple brands of TVs, Blu-ray players, DVD players/recorders, DVRs, VCRs, etc.

HDMI Control: The Yamaha AV receiver supports the HDMI control function, which allows you to operate external components via HDMI. If your TV or other external components support HDMI control, you can use the remote controls of those devices to operate some of this unit's functions, and to synchronize this unit with the operation of those devices. You can use the following operations with the remote control of any of the connected HDMI Control compatible devices.

• Power synchronization (On/Standby)
• Volume control, including Mute
• Changing the volume of the audio output signal device (either the TV or the receiver)

AV Controller App: This AV Controller App (free) will turn your iPod touch, iPhone, iPad or Android device into a Wi-Fi enabled remote control for the Yamaha AV receiver. This App provides the flexibility to control input, volume, mute and power commands. You can browse content from all internally available sources such as Internet Radio, USB and AM/FM tuners. You can also control all AV receiver zones such as powering on and changing input for each zone. This App not only controls the Yamaha AV receiver, it also controls Yamaha Blu-ray Disc Players, supporting various functions including Play, Stop and Forward. In addition, you can browse music stored on your Apple iOS or Android device and wirelessly transfer the content to the Yamaha A/V receiver for playback.

• AV Controller App for Apple: The free AV controller App for Apple is available for download from the Apple iTunes App Store. It supports the iPod touch, iPhone , or iPad with iOS 4.2 or higher installed.
• AV Controller App for Android: The free AV controller App for Android is available for download from the online Google Play. Requires Android 2.1 and up.