Compatibility: The enclosure is roughly wedge shaped with light gray plastic top and side
plates, and it`s bottom is contoured to follow the shape of the floorboard in 94`-98`
Dodge Ram full-size extended cab trucks. This enclosure fits under the center portion of
the rear seat and extends forward to the backside of the front seat(s). Two cup holders
(each has a 2.75" diameter opening) are molded into the top of the enclosure. The top
front "corner" of the enclosure is curved/recessed to allow the factory front
seat armrest/console to fold up/down without obstruction. The plastic fascias are colored
to match the "light gray" interior found in some 96`-98` Dodge Ram full-size extended
cab trucks. Check the Install Guide for applicable vehicles.
Cosmetics: The enclosure`s top and sides are finished with "light gray" molded plastic fascia
plates with a wrinkled surface pattern. The main body of the enclosure is made of particle
board covered with medium grey/black box carpet. The enclosure has an integrated molded
black plastic base that is shaped to allow the enclosure to follow the floorboard contour
of the above mentioned vehicles.
Cup-Holder: Molded into the portion of the enclosure top that extends from the front edge of the
back seat to the backside of the front seat(s), there is two cup
holders (each has a 2.75" diameter opening).
Wiring: The wire supplied to connect the terminal cup to the woofer is terminated at both ends
with 0.210" female quick slides. The input terminals are gold plated 5-way binding posts with plastic wire retaining
Mounting: Even though the enclosure will be held in place by the back seat,
transmission hump and the backside of the rear seat, Ai Research recommends permanently
securing the enclosure to the vehicle. No mounting brackets are included,
so, to permanently attach the enclosure to the vehicle, a bracket kit (item 125B702KIT)
will be needed or brackets and screws may be purchased from a hardware store. Bracket
mounting requires drilling and screwing into the vehicle and enclosure.
Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.