Skip Navigation

Q-Customs Factory-fit Dual 10" Subwoofer Enclosures

1982-1992 Chevrolet Camaro / Pontiac Firebird / Pontiac Trans Am (1982-92, black)

| 2 questions - 2 answers

Find what fits your vehicle


Can't find your exact vehicle?

Item # 044CECF1

This item is no longer available.

Shop all Custom Empty Subwoofer Boxes


Our take on the Q-Customs Factory-fit Dual 10" Subwoofer Enclosures

Designed to give you factory fit and finish plus great sound and durability, this Q-Customs custom-fit enclosure by Q-Logic holds two 10" Type 1 subwoofers and fits perfectly into the storage well.

Designed to give you factory fit and finish plus great sound and durability, this Q-Customs custom-fit enclosure by Q-Logic holds two 10" Type 1 subwoofers and fits perfectly into the storage well.

The photo shows how well this enclosure integrates with the interior of your vehicle. It looks like original equipment, but gives you deep, pounding bass no factory sound system can touch. Internal volume is 0.65 cubic feet per side. 1-year warranty.

Please check with us before purchasing by using the vehicle selector on our site, or calling a Sales Advisor at 1-888-955-6000 to verify fit information. To match your vehicle's color, be sure to choose the color and year that matches the specific model year of your vehicle.

What's in the Box:

  • One dual woofer enclosure (for 10" woofers)
  • 1-black colored plastic fascia
  • 2-black colored plastic mesh grilles
  • 2-22" lengths of speaker wire (0.205" female quick-slides on each end)
  • 8-1" self-tapping screws
  • 2-12" x 12" pieces of polyester fiber
  • instruction sheet.

Hands-on research

Product Research


Overview: The enclosure is a two-piece unit consisting of a enclosure made of 5/8" MDF and a black plastic fascia. The fascia can be painted to match the interior of the '82-'92 Chevy Camaro, Pontiac Trans Am or Pontiac Firebird in which it is to be installed. Two rectangular, 2 1/2" tall black plastic riser blocks are attached to the bottom of the enclosure; the riser blocks will hold the bottom of the enclosure 2 1/2" off of the storage well floor (overall enclosure height including the riser blocks is 12 1/4"). The wooden portion of the enclosure is covered with medium gray/black box carpet. The plastic fascia is held in place by the same screws that hold the woofers place.

Input Terminals/Wiring: There are two sets of nickel-plated 5-way binding posts (with plastic wire retention nuts) mounted on the rear of the enclosure. The wires supplied to connect the terminal cups to the woofers are terminated at each end with 0.205" female quick slides.

Internal volume: 0.65 cu/ft internal volume per side. There is a divider that separates the air space of one woofer from the space of the second woofer.

Maximum speaker frame diameter: 12.227" (when grilles used); 12.377" (when grilles not used).

Installation: Run speaker wires from amplifier to enclosure. Place enclosure in rear storage well (between rear wheel wells), and permanently secure the enclosure to the vehicle (see note below). Place plastic fascia on box. Connect speaker wire between woofers and terminals. Place woofers on top of   fascia. Run screws through woofers, fascia, and into box. Press grills into fascia.

Note: For sonic and safety purposes, Ai Research recommends permanently securing the enclosure to the vehicle. No mounting brackets are included, so, to permanently attach the enclosure to the vehicle, a bracket kit (item 125B702KIT) will be needed or brackets and screws may be purchased from a hardware store. Bracket mounting requires drilling and screwing into the vehicle and enclosure.

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Q & A

Customer Q&A

2 questions already asked

This Q-Customs Factory-fit Dual 10" Subwoofer Enclosure is just the subwoofer box designed specifically for select 1982-1992 Chevrolet Camaro / Pontiac Firebird / Pontiac Trans Am vehicles. It has a maximum depth of 5-3/16" and an internal volume of 0.65 cubic feet per side, but there aren't any subwoofers included; so that's why there aren't any power handling specs listed.[ Larry  Jan 13, 2016 ]  Staff
We don't have any additional images other that what is on the website that came from the manufacturer. You can check out the sheet of information that comes with the unit on the details tab on our website under the heading "What's in the box" and view the owner's manual. The installation instructions that come with the enclosure discuss permanently mounting the enclosure to the vehicle using a suitable type of bracket found at most hardware stores. It also mentions that the fascia panel should fit snug, and snap under the ridge around the latch area. You may want to contact the manufacturer for more information using their website, or Customer Support 800-762-0351. Hope that helps.[ Kenny  Dec 31, 2015 ]  Staff