Sanus BF31B Speaker Stands
Crutchfield Customer Review (What's this?)
Bargain for the price. Easy to modify or paint over.
Cons: Not the best but way less.
How about furniture-grade speaker stands that are not only stylish, but can actually help improve your speakers' performance? Sanus' Basic Foundations® stands give you all that in an affordable package!
Basic Foundation stands are made with sturdy MDF (the same material used in many quality speaker cabinets) to resist unwanted resonance. Their twin contoured pillar design offers rock-steady support. Speaker wires run down a groove between the pillars a snap-in black cover completely conceals the wires from sight, leaving just the clean lines of the stand. The stands come with triangular isolation pads for the top plate, to protect the speaker's finish, and provide additional resonance damping.
Priced per pair
Bargain for the price. Easy to modify or paint over.
Joel, Jacksonville, FL
Average Customer Review(s):
Bargain for the price. Easy to modify or paint over.
Cons: Not the best but way less.
Just got these and am very happy. Took no time to put them together. They look nice in our living room. They even have a way to hide the speaker wire which my wife loved. They are solid too so yes, these are nice. Local store had these exact same stands for $200.
very easy to put together and setup speakers seems sturdy good for the price
Pros: compact space needed
Cons: could be a bigger platform
These stands are adequate for my small monitor speakers, although they don't look quite as nice as I thought that they would, especially with the air gap between the two pieces that make up upright. The gap would not have been noticeable if the pieces that conceal the wire and cover the backs of the stands had been the full length rather than half length. I remedied the gap issue by taping black construction paper on the inside. As far as assembly, I had a bit of a challenge getting the carpet spikes onto the bottoms. The are plastic without screw threads and are meant to be inserted into the provided holes, but it was a struggle. I finally got them in after soaking them in hot water and gripping with pliers to force them into place. In the final analysis, they look fine.
Pros: Hold small monitor speakers well
Cons: Aesthetically so-so looking plastic carpet spikes difficult to insert
Assembly was easy, very sturdy, looks great. Can't ask for much more in a speaker stand.
Great stands, I was very happy that I purchased these. I bought 2 sets..
Pros: easy assembly and slick design.
Solid stands, decent speaker wire channels. Surface a bit rough but livable. Wish it did come with wood floor feet. Otherwise a good product for the price. As always great service and delivery from crutchfield.
Good for the price
The spikes in the base really keep the stand from moving around on the carpet. The base is also wide preventing my wife's CATS from knocking it over when they rub against it. The wires are hidden very well. Not the smoothest finish, but the functionality and overall look help you forget. The installation kit includes little foam triangles that I used to level my speakers. I added double-sided tape to the bottom of the speaker and top platform just in case the cats decide they wanted to knock the speakers down. So far, so good. I'm very happy with these stands!
Pros: Easy to assemble Wide base Very discreet
Did not meet my needs. The room I have my system in is situated in a way that I had to push the speakers back when I was not using them because of pets. I never had speaker stands before and every time I had to slide them into listening position I would get so nervous thinking the speakers would fall off of the small platform. I decided to put them away for now and bought a pair of end tables to use. They might not be at the perfect height but I no longer have nightmares of my Elac speakers crashing down.
Pros: Puts your speakers at a good listening height.
Cons: Not good for those with pets or if you have to move them around a lot. My speakers did not feel safe on them.
Great looking and easy to put together.Thanks Crutchfield
Pros: Nice looking and easy assembly
very good. basic speaker stand.
Very nice stands. Well worth the price and they have a good look.
Pros: Well balanced.
Great for small speakers...right height to elevate from the floor
Stands are very sturdy, and the pre-drilled holes lined up as they should. Not beautiful stands, but very functional.
Pros: Easy to assemble
Cons: Not especially attractive
pretty nice stands for the money I paid for, the color matched my R-15M. I'm removing one star just for the poor shipping package.
Pros: Cables are hidden within the stand.
Cons: Poor shipping package.
Appealing looks, sturdy construction , easy to assemble , stable platform for bookshelf sized speakers and no hassle purchase as well as speedy delivery. I literally assembled both speaker stands in 10 minutes with nothing more than a Phillips screwdriver. A great value at the price. Only one minor issue, therefore the 4 stars. The screw heads that attach the speaker platform to the vertical pieces are not recessed. The speakers rest on the screw heads. Not an ideal design. Other than that I am completely satisfied.
Pros: Price, looks, ease of assembly, sturdiness
Cons: Speaker platform screw heads are not recessed
Nice, basic stands. They look better in person. Non-resonant. They fit my needs perfectly. Simple to build, but I'd advise a thin line of wood glue at all contact points. It gave them a really solid feel that wasn't there beforehand.
These are just what I was looking for. Easy to put together and the perfect height for my space. Price was great. Very happy with them.
These were a great deal, they made my klipsch bookshelf speakers look great!!!
Pros: Great quality Great price Look exceptional
Getting the drivers up to ear level is important. These speaker stands did just that.
Pros: Does what it's designed to do. Inexpensive. Small footprint.
Cons: Screw holes were sloppy. Broke a few toothpicks in half and pushed them into the holes. Worked good.
Stands come boxed well. Very easy to put together. Non resonate, no sound of their own. When I put the speakers on the stands they nearly disappeared, which is what you are looking for. Perfect height. Nice build. Price is good.
Cons: No cons.
Great stands! Did definitely recommend! Easy to assemble plus great price!
not real wood and quality just above discount retail. You get want you pay for the price. I wish I had gotten something better
Pros: holes line up and the screws go in pretty good. They look find.
Cons: Light weight partial board. plastic feet. I can see the wires from the front. plastic backing isn't long enough mostly cover the back. speaker wire hole isn't big enough for most speaker wire that doesn't come with box system.Crutchfield response on 7/18/2016 Whenever you are not completely satisfied with anything you purchase from Crutchfield, please contact our Customer Support team. Purchases from Crutchfield can be returned or exchanged within 60 days of the purchase.
Stands are decent for a mid to low cost entry.
Pros: Easy to assemble proper height decent stability
Cons: Would have been nice to have a predrilled center "mounting hole" to be able to secure the speakers to the stand. I have Definitive TEch Pro 800 speakers on htese stands and if they were just sitting on them a tap from a vac cleaner would knock the speakers off. Wound up using the wire feed through hole to secure speakers with bolt to bottom mount.
Sturdy and stable. A good value at fifty bucks a pair.
Pros: Easy assembly. All the pre drilled holes lined up.
Cons: Plastic spikes don't easily pierce the carpet. Speaker wires peek out the front.
These are a relatively well made, well packaged item that functions as expected. They are not furniture grade - just painted MDF that looks fine once assembled. Instructions are easy to follow and it doesn't take much time to put them together. The are exactly what I expected for the price. The upper support block is relatively small but I have PSB Alpha B1's on there (relatively large for a bookshelf speaker) and they are pretty stable. Several reviewers have complained that the center hole in the base and the top panels is insufficient to put speaker wire through. That's not why the holes are there. The manufacturer puts these holes in during the CNC process to allow the pieces to be hung on a wire as they travel though the paint booth allowing all sides to be painted at one time. Other reviewers have commented that the plastic back covers are too short and don't cover the full length. This is also an intentional design - your speaker cables enter through the gap on the bottom and exit through the gap at the top. Actually a quite simple design. These are a good value to support a $300 pair of speakers - these stands are about the correct ratio. As usual, excellent and prompt service from Crutchfield....
These stands work well for me. For my new Martin Logan Motion 15 speakers. They accommodate the weight while putting the speakers at ear level for my listening position.
Pros: Easy assembly. Nice aesthetic. Sturdy Price
Cons: Requires a little creativity to completely hide speaker wire due to design of the stand.
Very pleased with this stand, looks great, and was easy putting together...
Pros: nice looking easy assembly
Easy to put together. Does the job well.
Pros: easy to put together
Great speaker stands! Easy to assemble and very sturdy.
The work perfectly for me powered bookshelf speakers. Pay attention to the weight recommendation. They would not work for anything over 20lbs.
Honestly, it would be hard to find a solid speaker stand like this for a better price. Assembles in minutes, and holds my 6" Boston Acoustic bookshelf speakers with no issues at all. I didn't use the carpet spikes, as these stands needed to tuck under a console and there wasn't room. I also opted to run the speaker wire up through the back channel, but not through the top plate. It just isn't needed, in my opinion, and is extra effort. Note that these are almost a foot wide at the base. Measure to make sure you have room. Well made, and certainly worth what I paid. Crutchfield's fast delivery was also much appreciated!
Pros: Easy to assemble with a phillips screwdriver. Sturdy. Matte finish. Great price.
Cons: Wire management through the top plate is slightly tricky, but isn't ultimately needed.
After looking tirelessly on other websites to find a NICE pair of speaker stands that would compliment my home theater setup, I stumbled upon these, the 31" fits perfectly for my TV since it sits a little higher than most entertainment stands. These are very sturdy, and hide the wires nicely. I have Polk TSi100's on these and the rubber "mats" hold them VERY well..there is no drilling or screwing involved with the speakers.
Pros: Very well built, great height
Easy to assemble and well-made
Easy assembly,I also used glue to help secure everything being careful not to overtighten screws.All together,no cracks and very solid.They look great!!!!
Pros: A very nice looking pair of stands at the right height for superior sound from my Klipsch RB-61's
Easy to assemble and nice looking. Appreciated extra benefit: spikes included, which greatly improved stability on my carpeted floor, excellent quality control: predrilled screw holes are accurately placed and multiple pieces are even length and attractively finished. There are a couple of items that could be improved, but I'll list them below.
Pros: Easy to assemble and nicely finished. Reasonable price.
Cons: The pre-drilled holes are slightly oversized, which makes it easy to strip out, especially if you use a power tool (drill/driver, electric screwdriver, etc.), so hand tighten carefully.
I could not pass up these stands. They were the perfect height and color for my home theater 7.1 surround sound setup. At 25.00 a piece, it is a steal. Just be careful during assembly as it is very difficult to line up the pieces with the baseboard.
Pros: Excellent finish Durable Perfect Height
Cons: Assembly is a hassle, just use wooden screws to keep the boards in place instead of the metal ones. One mistake while screwing in the screws will crack the boards.
a very nice basic stand that works perfectly for my application...Polk Monitor 30's. easy to assemble and look very nice with the crinkle black finish. only complaint would be the little adhesive pads that came with stands...too small. luckily I have plenty of those saved through the years and used better ones for the speakers to sit on and for the bottom of the stands as they sit on a concrete floor. recommended.
Pros: nice look, easy to assemble, sturdy
Cons: adhesive pads too small
I was a little skeptical, but these are very good stands--I wanted inexpensive stands that were heavy enough to be sturdy but light enough to move out of the way easily if necessary. I also used two jumbo rubber bands (1" wide) over the speakers and under the support in front and back to add some security in case the stands get bumped. (Rubber strips cut from old inner tubes work.) They also look good & assembled easily and tightly.
Pros: Inexpensive, sturdy; easy to assemble; lighter than some stands (easier to move); look good
Cons: None so far
For around the 50$ mark I don't thin you can get much better. The quality was within the expected range for the price of the stands. They are used for holding Audioengine P4's. They work well with the speakers sitting on the rubber feet they provide. The feet spikes although they are plastic dig into carpet just fine. I feel they wouldn't work as well as metal on a wood floor but they hold the stand in place for me. The only issue I have it they put a cable management hole underneath where the speaker would go but, I don't see how you'd be able to run a wire through it with a speaker sitting on it. The second is since the two support beams that hold it up are separated it won't conceal your wire if tou try to use that method anyway. i personally just run the wire hanging and don't care but for something looking to conceal the wire it may be a bit tricky.
Pros: Cheap, Decent Build Quality, Easy to put together
Cons: Bad for hiding f=wire ot speaker
the parts do not fit quite good and this statement comes from a guy that has his all house furnished with ikea stuff. I think those are good for tiny speakers only and no carpet.
Easy to assemble, solid stand, works perfectly for my Pioneer SP-BS21LR speakers. Nice finish and looks great with my setup. At such a great price, you can't go wrong. Would definitely order again.
These are good stands had a pair before so let me explain the 4 star rating.....the first pair I had had vibrated the screws loose and the stands collapsed with my speakers on them...banged my Sony bookshelves up pretty good had noticed that the mdf had spilt so they were junk. Order these due to the price and they are good stands my I recommend using a little wood glue on the screws to ensure they don't vibrate loose especially if you bang your system like I do..
Pros: good quality stands nice appearance great price
Cons: the screws vibrate loose after time
Very easy to assemble and a sturdy product
Pros: Ease of assembly
Great product! Easy to install and well made.
Pros: Easy to assemble
Went together pretty easy, works great. From reading the other product reviews and the product descreption had a good idea what I was getting. These look great up in my tv room, not much natural light. But if I was going to place these in my living room I probably would go a little higher end stand, just for looks only, maybe real wood or copper, metal etc.
Pros: Works Great, easy to put together, very solid stand for particle or pressed wood. Price!
Cons: Pressed wood, once you get them together I wouldn't advise taking them apart. Rough black texture to the wood.
Good Price, great service from Crutchfield!
Pros: nice price
Cons: the stabilizing "spikes" werent sharp at all
These are basic black speaker stands that work well. The box arrived in good condition without any damage. I had no problems with assembly, which basically involves putting four screws into each end. The screws and holes were matched fine. I did not use the plastic spikes that go into the bottom of the stand, as the stands were stable on my flat carpet.
This is a very nice looking product. It is easy to assemble. however, when inserting the screws into the panels the wood begins to split even before you can get the screw completely inserted. I believe it is a result of the wrong diameter and depth of the screw.
Pros: Nice looking stands. Very good price.
Cons: Stands get destroyed while assembling due to improper size screws for the thickness of the wood panels.
These stands are great, you can't go wrong for the price. They look great with speakers equipped, they aren't an eyesore, nor are they distracting. The only thing that I would improve would be the smoothness of the wood surfaces. Some additional sanding would make the surfaces less rough, which anyone could really do on their own and just repaint them. But obviously this isn't noticeable to the eye and was only noticeable during assembly. The spikes that are provided aren't exactly sharp either, they are rounded plastic tips, which still does the job but might not be as effective as sharper tips on carpet. But you really can't go wrong for the price
Pros: Sturdy, attractive, concealed wiring
Cons: Rough surfaces
I bought two sets of these and they really help the sound and the look being distributed through the room.
Pros: Affordable, easy to assemble, and great look for each of my rooms.
Cons: none found yet!
The product was as described easy to assembled and are very stable even with some large Infinity Primus Bookshelf speakers.
Pros: Easy to assemble and very stable.
Cons: None yet!
Excellent stands! Easy assembly and even though they are inexpensive, GREAT STANDS!!!!!
Pros: Price and easy assembly!
Great product. Great look.
Excellent value for the money. The stands assembled easily, with no issues whatsoever. I saw some less than favorable reviews for this product and was hesitant at first, but I'm glad I purchased them. I would recommend them as a great value for the money. Prompt delivery as well! This was my third purchase from Crutchfield, and I have been very pleased with price, delivery, and technical support.
Pros: Easy assembly, look good for the price.
box was missing top plates and plastic back covers. Crutchfield is sending replacement pieces. while I believe you get what you pay for, even at this price point everything should be in the box.2 stars for Sanus-4 stars for the Crutchfield response.
Pricey for what they are but how can I complain because they do the job perfectly!
Fantastic stands! Very well made and very sturdy! Perfect for my Polk T15s. Pre-drilled holes are drilled perfecty fore easy assembly with only a screwdriver and nothing extra needed. Only downside i can see is that if you use a thick gauge speaker wire, you may need to enlarge the hole on the upper part of the stand where the wire feeds through, and get thicker rubber pads under the speaker because the wires come up under the speaker so if the wire is too thick, the speaker will sit on the wire, not the stand making it un-stable. But if that is the case you could just feed the wire out the top of the rear of the stands and avoid the hole in the top base all together. Not a deal breaker by any means. And it didn't affect me because i didn't feel the need to run "Monster Cable" to my front speakers.
Pros: Solid, look great, easy to assemble, killer price
Cons: May need some very simple modifying if thck speaker wire is used AND is run through the top base of the stand.
I was looking for a budget solution for my Klipsch RB-51's and these stands fell terribly short of my expectations. The item was not packed properly from the manufacturer and virtually all pieces arrived damaged with scratches and chips in the particle board. They also failed to include all hardware for installation. I would have given them a 4 star rating for the price I paid but considering I had to return them for a refund they get 3 stars.
Cons: Poorly packaged, Lacking manufacturing quality control
good product except for the fact that all of the mounting strips were missing except for one pair and one set of rubber pegs for floor mounting were missing. Wood was also slightly cracked
The stands work as intended. Mine came with one of the holes where the spike goes busted a little (still usable with some glue) and one of the plastic sheets that cover the back speaker wire missing. All in all for the money they work and look nice.
Pros: Look nice, work
Cons: missing parts, busted spike hole
I got the package from Crutchfield a few days ago. The first thing I noticed was that the box didn't arrive like it had been through WW2 like other Sanus pieces I have purchased in the past. The stands are exactly as described. Easy to assemble, good looking, and practical. Unless you are looking to show how much you can spend on speaker stands, these are a great speaker stand for any room. The included floor spikes for carpet are great. I would recommend this product to anyone who is looking to elevate their surround speakers to ear level.
Pros: Easy to assemble
All you need is a "manual" screwdriver and a bar of soap for hassle-free assembly. Simply "lube" the screw threads with soap and gently snug the screws while rotating from screw to screw like you would tighten the lug nuts when you change a tire. I also used one-inch square black velcro pieces to: 1) Secure the speaker to the stand and 2) Raise the speaker just slightly to offer speaker wire clearance to the center orifice. Simple!
Pros: Outstanding product and excellent value Nice finish on the product Scratch and dent-free Looks nice...and then some...for the money.
Stands are cheaply made for the price. Be very careful when inserting wood screws. The holes are pre-drilled, but you may want to insert a smaller drill bit to ensure the holes go all the way through. LIne up screws exactly with the pre-drilled holes otherwise your partical board will split.
Cons: Partical Board. Cheaply made.
I needed stands for small speakers and these are perfect, simple to put together and the right height. And they shipped to Hawaii for free by UPS 2nd day. I couldn't ask for more.
Decent quality, strudy enough for the speakers I have. Easy to assemble.
These stands are really nice for the money. Just becareful when you are screwing them together, especially when using a cordless drill. Do not the tighten the screws to tight, other wise you will crack the boards.
Excellent for my Polk rti4 rear surrounds. Fast shipping and easy to put together. Look nice too!
Very happy with purchase. Easily put together. A couple screws were missing, I called and they were immediately shipped to me within a couple days. Great Customer Service and def. would recommend. The stands look great in the livingroom.
These stands are easy to assemble. They have a great finish and don't feel cheap. I like the design that allows you to hide the speaker cables in the back of the stands. The base plate is big enough that there is no wobble once speakers are placed on the stands. You can't beat them.
These stands were exactly what I needed. They have a nice black finish look, are made of sturdy materials, and assembly didn't take too long. Also provide a nice speaker wire concealment system.
Ordered these after reading so many positive reviews. The package came sooner than I expected! I must say that the instructions weren't needed as the construction is very basic and simple to understand. A simple hand screwdriver is all that is needed as indicated in many reviews. No problems at all and it looks very nice. Take your time and do it right. I highly recommend this product for the budget-minded consumer.
Sturdy product with a modern design. Very easy to put together! I have 10 pound speakers on mine and it holds them without an issue.
Great product. Just be careful assembling and make certain screws line up w/ the holes. It is possible to have the screw penetrate the stand outside of the screw hole.
Easy to assemble, very stable, feel and look expensive. Highly recommended.
These are simple, stable stands. I had had a 24" pair of theses stands supporting front bookshelf speakers for years. I went to floor standing in front and moved the bookshelf speakers to the rear. These stands were the height I needed to get the bookshelf speakers above the sofa. However, I noticed a significant reduction in quality between the older 24" stands and the newer 31" stands. The new models have much smaller top plates than the old and they are finished with a cheap, rough, spayed on paint coat as opposed to smooth lacquer finish on the old. I could have made stands of this quality in my garage with a little MDF and a can of black spray paint. They still work well for what they are designed for.
Attractive appearance, stable... wish they had a hole to feed the wire into, and some extra attachment/sticky substance on top so the speakers wouldn't just - fall off... Overall - a good decision, and they've completed my home theater experience.
Nice design, stylish, quality materials. I use these stands with Polk Audio RT1 surrounds. The speaker footprint is about 1.5-2" larger than the stand top, but it balances very well and the speakers are secure using the triangular isolation pads that also prevent speaker movement. Although mine are on a carpeted floor, I did not use the carpet spikes as I have found them to not be necessary. I have experienced no perceptible resonance. Assembly is somewhat cumbersome. Aligning the holes in the top and bottom plates to the pillars for screwing is a challenge. If you don't have a helper, I recommend starting the screws where they just come through the other side of the plate, then guiding the plate/ screws into the holes until you feel them "seat". Be absolutely sure they are aligned before screwing because the screws will self-tap into the pillars very easily, splitting the material. My stands arrived with the box damaged, and missing all the hardware, plastic wire covers, and a damaged bottom plate. I contacted Sanus and they promptly sent replacements within a week. Crutchfield should consider overpacking this item since the original box is not very durable
These stands are exactly what I was looking for, at a very reasonable price. While my active speakers are slightly larger than the top of the stand, theyll work well.<BR><BR>Ive read where people have had problems with the assembly. While I can see shy they might have had problems, I had none whatsoever. There are a couple of hints and adjustments to the assembly instructions that are worth noting.<BR><BR>Unpack everything and make sure everythings there. Okay, the only thing I found wanting were the extremely tiny trangular self-adhesive acoustic pads (<1/2" square, bisected diagonally). However, my speakers came with large self-adhesive acoustic pads, so its not a problem for me.<BR><BR>Do as someone else recommended, use a rubber mallet and tap in the plastic spikes into the base before anything else. Just be careful handling them after that, so they dont break off.<BR><BR>Next, get yourself a bobby pin, small drill bit, small awl, or something to find the pilot holes for alignment through the base and top of the stand to the risers. This is important. Forget trying to eyeball it with chalk or something like that, this is simpler.<BR><BR>Screw in one screw to where it just slightly protrudes from the other side, to align the first hole in the riser. Here its good to have the unit upside down. You may either drop the screw into the corresponding hole, or use the opened up bobby pin to align through the base to the riser. Just make sure the two boards are put together BEFORE you start tightening the screws. Failure to do this may split the boards (as others reported). Put in the lexan cord covers on the back and you're done!
On this product, I liked the way it was assembled with the screws. However the carpet spikes are plastic, potential for breakage if moved around alot. Also the hidden speaker cord is misleading. In the front of the stantions is a gap and if you don't move your cord to one side you will see it. The back cover is in two pieces instead of one so you have potential for light leakage through the back of these.
Bought these to hold my rear speakers for my HTIB setup. They are made sturdy and are a good deal for the price. Only gripe is that the wood split for me, and I didn't screw it that hard. Overall, puts speakers at a good height. Would recommend.
If you are in the market for black stands, these are the ticket. They are really well designed for the smaller, satellite speakers. However, I would not be comfortable placing an average size bookshelf speaker on these stands. I am happy with my set.
These are very nice stands for the money. Very sturdy and beautiful black textured finish. The included spikes make them very sturdy for carpet. As always CRUTCHFIELD is the best.
Overview: The BF31b speaker stands are constructed of MDF, which offers superior strength and resists unwanted resonance. The twin contoured pillars are aligned in a "V" configuration, offering additional rigidity and providing for the Speaker Cable Management System. A cover snaps into channels on the back of the pillars, hiding the cables from view. The supplied floor spikes further minimize resonance and provide stability on carpeting. The special triangular isolation pads are placed on the top plate for speaker protection and acoustic isolation.
Note: Each stand can support up to 20 pounds.
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.
Compatibility with Definitive Technology Surround Sound Speakers [ Raymond Mar 15, 2018 ]
THESE SPEAKER STANDS ARE WHAT I WAS LOOKING FOR TO COMPLETE MY AUDIO SETUP. [ RALPH Mar 05, 2018 ]
Ordered to go with the bookshelf speakers I ordered. I know Sanus has a good reputation. [ Jethro Mar 04, 2018 ]
price [ MURRAY Feb 19, 2018 ]
Setting up a home office, and these stands raise up my speakers to just above desk level. [ ZACHARY Feb 14, 2018 ]
Read reviews and and quality deal and price. [ James Feb 03, 2018 ]
right size, right color [ Don Feb 03, 2018 ]
For my polk tl250 speakers [ Alberto Jan 29, 2018 ]
Inexpensive stand for bookshelf speakers. [ JON Jan 23, 2018 ]
They perform as advertised, I already have one pair and need another to complete my surround sound experience. [ NED Jan 11, 2018 ]
I trust Sanus for quality affordable speaker stands. My last pairs went 8 years until I just didn't need them. They are not going to wow your friends but they do their job and blend in to the background. [ Timothy Jan 07, 2018 ]
Reviews seem to indicate that these will fit my needs. [ ISAAC Dec 30, 2017 ]
Recommended by Crutchfield and on sale ! [ Matias Nov 26, 2017 ]
Chatted with an advisor about a situation I have with my Polk Audio rear speakers. I don't have a wall to hang them on in this house and needed a stand. We talked about smaller speakers but I purchased these FXi A6 units knowing our next house will have a place for them. ...the house hunting continues so these stands will help get us by with a few minor modifications! [ Cory Nov 24, 2017 ]
They were the right height for my bookshelf speakers - the price was good. [ ALDRIC Nov 15, 2017 ]
I chose these stands for my Klipsch bookshelf speakers. The height will be good to raise the speakers to the right level for accurate sound reproduction. [ Marcus Nov 02, 2017 ]
Very help good costumers supports. [ Kong Oct 19, 2017 ]
This was a mistake. The product info was misleading. [ Edson W Sep 13, 2017 ]
They have a good look that will go well with my current living room decor, the price was exactly what I expected to pay, and will work great with my Klipsch R-15M's. [ Kyle Sep 02, 2017 ]
Needed an inexpensive speaker stand, and these should work just fine. [ BRIAN T Aug 05, 2017 ]
I wanted my Polk Audio bookshelf speakers to sound even better. After reading articles on this website about stereo speaker placement, I was motivated to order these and aim my speakers to my position and space them evenly. [ Trey Jul 11, 2017 ]
recommended by advisor. exactly what I needed [ Troy Jul 05, 2017 ]
You need some cool stands for your speakers. These will work great in my new man cave. [ John Jul 04, 2017 ]
My brother in law recommended this site because we needed to replace speaker stands and these matched what we already had. [ Mary Lou Jun 19, 2017 ]
Needed a nice looking speaker stand for my Elac B6s that was economic, too. [ Jake Jun 06, 2017 ]
price and quality [ JAMES May 19, 2017 ]
Chose these because I wanted a simple, clean low cost stand to go with the ELAC speakers I purchased. [ Peter May 09, 2017 ]
I needed a pair of speaker stands and these were the right height. [ John Apr 27, 2017 ]
Great price good reviews. [ Ronald Anthony Apr 25, 2017 ]
saw recommendation on another site. [ john Apr 13, 2017 ]
Excellent brand...I have used these many times in the past. I have not had any problems with assembly or disassembly of these, and the look and finish adds style to almost any bookshelf speakers in need of stands. [ Victor Mar 27, 2017 ]
These stands were a must in my living room setup. They are perfect for what I had in mind. [ TONY Mar 18, 2017 ]
Good reviews, and a good price. [ Gabriel Feb 26, 2017 ]
Basic speaker stands for a low price. [ Marcell Feb 08, 2017 ]
price, looks and fit [ Jeffrey Jan 16, 2017 ]
I have the BF24B Stands and I need another pair about 7" taller. Voila! [ Christopher Jan 03, 2017 ]
Quality [ Robert Dec 30, 2016 ]
Reasonable price and seems to fit my needs. [ Dwayne Dec 18, 2016 ]
Modest price [ Dane Dec 15, 2016 ]
kevin recommended this item to me [ MICHAEL S Dec 06, 2016 ]
name look and price [ Serge Dec 04, 2016 ]
recommended by Levi from customer service [ Bruno Dec 02, 2016 ]
price brand and size [ Moe Sep 27, 2016 ]
Reviews from others. [ Timothy Aug 09, 2016 ]
nice [ Ronaldo Aug 04, 2016 ]
recommended by crutchfield whom i trust [ Kenneth Aug 02, 2016 ]
Durable, heavy, modest price. NOTE: They / I would benefit from inclusion of 8 floor pads for hardwood floors. [ Ralph S. Jun 03, 2016 ]
The stand height was a major factor in my decision. Price was also reasonable. [ Tim May 23, 2016 ]
recommended by Crystal Crystal's Bio: http://www.crutchfield.com/Support/Bio.aspx?bio=161 [ john Apr 15, 2016 ]
quality and price. [ francisco Mar 06, 2016 ]
To achieve midrange sound with bookshelf speakers [ Beth Feb 21, 2016 ]
The price and looks good [ David Jan 05, 2016 ]
PRICE AND QUALITY [ Beth Dec 30, 2015 ]
I needed speaker stands since I lost the original speaker mounting brackets. [ JOEL Dec 28, 2015 ]
price [ Jordan Dec 23, 2015 ]
They just sit on the stands. I was worried when I had seen that. But my Polk audio have sat on them with no issues for over a year. [ ADDAM L May 09, 2017 ]
I did not see screws in the package I only used these for a short while so I am unable to answer your question [ Ken May 09, 2017 ]
No. They just sit on the stands. [ Marc May 09, 2017 ]
They do not. They rest on top of the stand [ Heath May 09, 2017 ]