Skip Navigation

Sanus LL11-B1

Super-slim low-profile fixed wall mount for 51"-80" TVs

62 Reviews | 1 question - 4 answers

Overview

Our take on the Sanus LL11-B1

The ultra-thin Sanus LL11 mount holds your flat-panel LCD or plasma TV a scant 9/16" from the wall — just about as close as you can get. It's the ideal wall-mount for many of the latest ultra-thin TVs. Yet this durable heavy-gauge design is strong enough to keep your TV firmly in place. The LL11 can support a TV with a screen size of 51" to 80", and a weight of up to 150 lbs.

The ultra-thin Sanus LL11 mount holds your flat-panel LCD or plasma TV a scant 9/16" from the wall — just about as close as you can get. It's the ideal wall-mount for many of the latest ultra-thin TVs. Yet this durable heavy-gauge design is strong enough to keep your TV firmly in place. The LL11 can support a TV with a screen size of 51" to 80", and a weight of up to 150 lbs.

The mount's brackets can easily be shifted to the right or left, in case the wall studs are a little off-center. You can also make small adjustments after the mount is affixed to the wall to level it, or even change the height. And the handy ClickStand at the bottom of each vertical brace swings out to prop your mounted TV away from the wall, to make cable hookup a breeze — without removing the TV from the mount.

Will this mount work with my TV?

Use the Sanus MountFinder™ to see a list of mounts that work with your specific TV.

Where do I drill the holes?

Tell the Sanus HeightFinder™ Installation Assistant how high you want your TV, and it tells you exactly where to drill.

Easy to install. Like that it keeps the TV tight to the wall so it's less obtrusive. Crutchfield service was very helpful in explaining the installation. The tilt makes connecting cables easier.

Martin, Chicago IL

What's in the Box:

  • Wall plate
  • 2 TV mounting brackets
  • Four M4 x 12mm bolts
  • Four M4 x 30mm bolts
  • Four M4 x 40mm bolts
  • Four M5 x 12mm bolts
  • Four M5 x 30mm bolts
  • Four M5 x 40mm bolts
  • Four M6 x 14mm bolts
  • Four M6 x 40mm bolts
  • Four M6 x 55mm bolts
  • Four M8 x 16mm bolts
  • Four M8 x 45mm bolts
  • Four M8 x 60mm bolts
  • Four M4/M5 flat-washers
  • Four M6/M8 flat-washers
  • 4 Lag bolts
  • 4 Drywall anchors
  • 4 Plastic inserts
  • 4 Large spacers
  • 4 Medium spacers
  • 4 Small spacers
  • Allen wrench
  • Hex-head bit
  • Instruction Manual

Product Highlights:

  • fits most flat-panel plasma and LCD TVs from 51"-80"
  • heavy-gauge steel construction with powder-coated finish
  • supports up to 150 lbs.
  • mount holds TV approximately 9/16" from wall
  • built-in ClickStands hold a mounted TV out from wall for cable installation
  • stud-mounting required
  • movable brackets for off-center stud placement
  • includes all necessary hardware
  • brackets: 35-3/8"W x 22-1/2"H x 9/16"D
  • warranty: 10 years
  • Our 60-day money-back guarantee
Reviews

Sanus LL11-B1 Reviews

Average Customer Review(s):

(62 Reviews)
rewards card

Submit a review and enter to win a $350 rewards card

Review this product

Thanks for submitting your review

Most reviews are processed and published within 5 business days. You will receive a confirmation email once your review has been published.

Your Review

Use the stars below to rate the overall product on a scale of 1-5
1500
Upload your photos

Not visible. Email associated with order.
(e.g., Charlottesville, VA)

Additional Fields (optional)

500
500

By submitting this review, you agree to our terms and review guidelines.

Filter by rating

Customer photos


<< >>
Details

Hands-on research

Product Research

Features
Dimensions

Features

Overview: The Sanus VisionMount LL11-B1 Super Slim Low-Profile Wall TV Mount features an innovative design which emphasizes the sleek look of your ultra-thin LCD, plasma, or LED TV by placing it just 9/16" from the wall. The LL11-B1 offers additional exclusive features that make it incredibly easy to install and use. ClickStand technology holds the bottom of the TV away from the wall for easy cable access without removing the TV from the mount. Convenient quick-release tabs on both mounting brackets stay hidden, but easily pull down to unlock the TV from the wall plate for cable access. The ProSet feature allows post-installation height and leveling micro-adjustments for perfect positioning after hanging. Lateral shift allows the TV to move left and right on the wall plate so it is placed exactly where you want it, even with off-center studs. Wall plate mounting holes are designed to accommodate 16" or 24" studs. Universal mounting pattern fits virtually any 51" - 80" flat-panel TV up to 150 lbs.

Compatibility: The LL11-B1 universal wall-mount bracket is designed to fit flat-panel plasma and LCD monitors from 51" to 80". The TV can have a maximum weight of 150 pounds.

Construction: The bracket is constructed of heavy-gauge steel with a durable powder-coated black finish.

Super Slim Low-Profile Design: The VisionMount LL11-B1's super slim low-profile mount design places your flat-panel TV just 9/16" from the wall.

ProSet: ProSet post-installation height and leveling adjustments allow TV to be perfectly positioned after hanging. Once installed, your TV or wall-mounted furniture may not appear completely level with its surroundings. ProSet technology lets you make micro-adjustments to height and level after mounting to ensure perfect positioning.

ClickStand: The LL11-B1's ClickStand feature allows you to tilt the bottom of the TV outward (8-degrees/3.0625-inches) and hold it there, giving you easy access to the back panel for connecting cables. Once all the cables have been plugged in, you can release the ClickStand and securely lock the TV into position on the wall plate.

Mounting: The wall plate must be mounted to wall studs or anchored to a brick, block, or concrete wall using the supplied lag bolts. The slots in the wall plate can accommodate a variety of stud spacing, allowing you to easily mount the TV to wall studs that are 16" or 24" on center. Once the wall plate is anchored to the wall studs and the monitor brackets (with the TV attached) are hooked onto the wall plate, the TV can slide left or right, allowing you to center the TV on the wall.

Note: Each monitor bracket has multiple bolt holes and can accommodate vertical hole spacing (on the back of the TV) from 3-15/16"(100mm) to 19-3/4" (500mm). Since the monitor brackets can slide on the wall plate, the horizontal hole spacing on the back of the TV can range from 11-13/16" (300mm) to 35-5/16" (896mm).

Steel Stud Mounting: If you wish to mount this Sanus wall mount in a building with steel stud walls, you will need the Sanus SSMK1 Steel Stud Mounting Kit (051SSMK1). Steel stud walls are typically found in commercial applications, such as office buildings, warehouses, and condominiums.

Mounting Hardware: The LL11-B1 comes with M4, M5, M6, and M8 bolts to mount the monitor brackets to your TV.

Note: Additional hardware may be required for your specific model of TV. For example; shorter or longer screws, thicker or slimmer washers or spacers. These additional accessories can often be found at your local hardware store.

VESA: Given the mounting bracket's range of motion, it will accommodate the VESA 300, 400, 300 x 200, 400 x 200, 400 x 300, and 600 x 400 mounting hole patterns in accordance with industry standards set by the Video Electronics Standards Association.

Installation Tools: The following tools are recommended for mounting the LL11-B1:

  • Stud finder
  • Punch
  • Level
  • Phillips-head screwdriver
  • Electric drill
  • Drill bits: 3/16" (wood studs) and 5/16" (masonry)

Dimensions

Wall Plate Dimensions: W = 35.3125", H = 4.875", D = 0.5625"

Monitor Bracket Dimensions: W = 2.625", H = 22.1875", D = 0.5625"

Total Weight: 9 lbs

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Accessories
Q & A

Customer Q&A

Crutchfield asked  
Why did you buy this?

Wanted high-quality, low-profile mount for a new TV [ Michael  Jun 10, 2017 ]
very low profile. Will enhance installation. [ Stephen  May 01, 2017 ]
Simple installation and small profile. [ Scott  Feb 26, 2017 ]
Flush (9/16 inches) mount to wall. [ John W.  Feb 19, 2017 ]
I was looking for a low profile mount that provided some flexibility with wall location. [ Kevin  Feb 07, 2017 ]
Recommended by Shawn and good reviews. [ P  Jan 20, 2017 ]
Ordered a new, slim, 2016 model 65 inch Sony 4K TV, and this was the best match for fit and function to what I needed. It has worked perfectly! [ jor-el  Jan 07, 2017 ]
Recommendation from Crutchfield advisor [ ROBERT F  Jan 03, 2017 ]
Thin profile, heavy duty, easy to install, highly rated. [ Brian  Dec 17, 2016 ]
close to wall profile [ theodore  Dec 16, 2016 ]
Slim mount [ James  Dec 01, 2016 ]
High quality wall mount for my TV. [ Roger  Nov 26, 2016 ]
I bought one for my 55" Samsung TV and it worked perfectly. It is thin and easy to add more connections once the TV is installed. My TV looks like a picture frame, looks great and I love it. [ Mehrdad  Nov 17, 2016 ]
Ultra slim wall mount for 65 inch Samsung [ JEFFREY  Oct 11, 2016 ]
It's the best mount out there. Very slim but it has a lot of adjustment options [ Jason  Sep 13, 2016 ]
great success with past purchases [ RUSSEL P  Sep 07, 2016 ]
I have a Sanus multiple position wall mount and feel it is an excellent product. I purchased this model due to it's slim construction. [ Guy  Sep 07, 2016 ]
The low profile was exactly what I needed for a commercial application with restrictions on how far the TV could protrude out. [ Jill  Sep 01, 2016 ]
Thinness. and simplicity. [ Yanghong  Jul 14, 2016 ]
Dexter recommended it. Dexter's Bio: http://www.crutchfield.com/Support/Bio.aspx?bio=175 [ AdamR  May 25, 2016 ]
Thinnest wall mount avaiable [ David  Feb 08, 2016 ]
It was recommended. I shall see how well it works. -R [ Richard  Jan 20, 2016 ]
Because of the large volume of high rating reviews. [ Adam  Dec 22, 2015 ]
Nice and thin. will keep the TV close to the wall. [ R  Dec 18, 2015 ]
very low profile, keeps the TV as flush to the wall as possible. [ Erez  Dec 07, 2015 ]

1 question already asked

Hello Francis,I was told by the building contractor not to use the medal studs that are in the wall because they are too thin and will not hold the weight of a large tv. A solution is to use a stud finder ( bought at Home Depot, etc) and then drill holes between the medal studs. I used bolts called toggle bolts. They are about 3 inches long and the nut end has two medal wings that fold.The wings open up once the wing nuts are in the wall. The holes in the wall have to be large enough to allow the wings to goin. You must remember to put the bolts thru the holes in the wall mount before you put the wing nuts on the bolts. Once you have done all that, start to tighen the bolts and level the wall mount. I would suggest using at least four toggle bolt. DONE !!!!! Now about the insulation in the wall. If your tv cable outlet is close to the floor you will need a metal fish tape to get through the insulation. I believe that it takes a more experiencd person to do that type of work. I hope this information helps decide on installing a wall mount..... DJC [ DOMINIC J  May 25, 2014 ]
Very sturdy for your big screen TV. I recommended [ HOA  May 23, 2014 ]
I don't have much experience with metal studs. I installed by Sanus LL 11-B1 into wood studs but I assume that if you use proper sheet metal screws (not drywall screws), it should work. I'd use #10 or #12 sheet metal screws that penetrate the metal stud at least 1/2". Be sure to allow for the depth of the Sanus bracket and the drywall. I'd also suggest checking with Sanus to confirm. Good luck. [ GARY  May 22, 2014 ]
I mounted my Sanus on typical drywall backed with wood studs. Not sure about metal studs? I am pleased with the Sanus mount because it holds our 50" Samsung very close to the wall. [ WENDELL C  May 22, 2014 ]
Articles

Searches related to the Sanus LL11-B1 Super-slim low-profile fixed wall mount for 51"-80" TVs