About the Sanus Classic MML12-B1
The Sanus Classic MML12-B1 is designed for flat-panel TVs up to 40", and holds your display just 1-1/4" from the wall. The mount's open-frame design allows plenty of room to store cables out of sight. A locking arm swings down from the mount's back plate, allowing you to secure it to the wall bracket with your own padlock (not included).
Will this mount work with my TV?
Use the Sanus MountFinder to see a list of mounts that work with your specific TV.
Where do I drill the holes?
Tell the Sanus HeightFinder Installation Assistant how high you want your TV, and it tells you exactly where to drill.
Product highlights:
- designed for flat-panel LCD TVs 26"-40"
- supports up to 80 lbs.
- holds TV 1-1/4" from wall
- mounting hardware included
- open design to keep cables out of sight
- stud-mounting required
- back plate locks to wall bracket with a padlock (not included)
- 15-1/2"W x 13"H x 15/16"D
- warranty: 2 years
- MFR # MML121-B1
What's in the box:
Sanus Classic MML12-B1 owner's manual
- Wall-mount bracket
- 2 TV brackets
- Four M4 x 12mm screws
- Four M4 x 30mm screws
- Four M5 x 12mm screws
- Four M5 x 30mm screws
- Four M6 x 12mm screws
- Four M6 x 20mm screws
- Four M6 x 35mm screws
- Eight M4/M5 washers
- Four M6 washers
- Four M4/M5 spacers
- Four M6 spacers
- Three 5/16" x 2.5" lag-bolts
- 3 Wall-anchors
- Three 5/16" washers
- Instructions Manual
Customer reviews for Sanus Classic MML12-B1
Loading...
Loading reviews...
Average review:
5.0 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Sanus Classic MML12-B1
Features & specs
Features | ||
---|---|---|
Mount Type | Flat panel TV | |
Motion | ||
Tilt | No | |
Swivel | No | |
Extend/Retract | No | |
Fixed | No | |
Roll (Level) Adjustment | No | |
Mounting Details | ||
Wood Stud (Single) | No | |
Wood Stud (Dual, 16-inch) | No | |
Wood Stud (Dual, 24-inch) | No | |
Concrete Block-compatible | No | |
Recessed Housing | No | |
Outdoor-rated | No | |
Motorized | No |
Product Research
Overview: The Sanus Classic MML12-B1 is a low-profile wall-mount bracket for small to medium sized flat-panel TVs and monitors.
TV Compatibility: The MML12-B1 can accommodate TVs and monitors with screen sizes from 26-40", and weighing up to 80 pounds.
Mounting Bolt Hardware/Pattern: 4mm, 5mm, and 6mm hardware is included. Given the mounting bracket's range of motion, it will accommodate the following mounting bolt patterns:
- 75 x 75
- 100 x 100
- 200 x 100
- 200 x 200
- 300 x 200
- 300 x 300
Note: Additional hardware may be required for your specific model of TV. For example; shorter or longer screws, thicker or slimmer washers or spacers. These additional accessories can often be found at your local hardware store.
Low-Profile Design: The Sanus Classic MML12-B1 features a low-profile design that placed your mounted television only 0.9375" from the wall.
Tools Required:
- Stud finder
- Punch
- Level
- Tape Measure
- Pencil
- Phillips-head screwdriver
- 1/2" (13mm) socket wrench
- Electric drill
- Drill bits (7/32" for wood stud, 1/2" for concrete)
Dimensions:
- Overall: W = 15.5", H = 13.0", D = 0.9375"
- Wall Bracket: W = 15.5", H = 6.0", D= 0.5625"
- TV Brackets (2): W = 1.375", H = 13.0", D= 0.375"
Loading...
Loading accessories...
Customer Q&A
Loading...
Loading articles...
This wall mount was very easy to install and is not visible behind my 26" TV. Very affordable good quality TV wall mount.
Julie from Tucson,Az