Sanus NF24 Speaker Stands
Crutchfield Customer Review (What's this?)
Oh in Nice,just what I needed. I already have the18 inchers
Our experts help you pick the ideal gear for your needs.Meet our advisors
Free tech support for the life of your gear.Read about our one-on-one expert help
You may return items that are complete and like new for any reason within 60 days.See the details of our return policy
Earn one point for every dollar you spend and use those points to save on future purchases.Get full details on Crutchfield Rewards
We offer vehicle-specific installation instructions, dash kits, wiring harnesses, and speaker accessories at deeply discounted prices with car stereo and speaker purchases. Available for most vehicles.Learn more
Our customers have trusted us with their business, and they’ve helped us win awards for our service.Check out our most recent awards
The manufacturer’s warranty always applies.See more details
High-performance speakers deserve high-performance stands. From top to bottom, Sanus' latest wood speaker stands combine fine furniture looks with ultra-rigid construction for solid support and optimum sound quality.
Each base and top plate is made of anti-resonant MDF and has a smooth low-luster black finish. Brass speaker studs and neoprene pads are included to isolate the speaker from the top plate. Plastic feet for the underside of the base plate protect wood or tile floors (adjustable carpet spikes also included). A patent-pending concealed speaker wire path on the rounded support pillar keeps cables out of sight. Assembly takes just minutes.
Priced per pair
Oh in Nice,just what I needed. I already have the18 inchers
Richard, Pittsburgh Pa
Average Customer Review(s):
Oh in Nice,just what I needed. I already have the18 inchers
These are holding a pair Polk Rti A3. The stands look good and are located where they won't be moved. They look good. Hope they last.
Pros: Looks good and just the right height.
Cons: Top shelf somewhat small.
I am satisfied with these speaker stands. My ELAC Debut5 fit nicely on them and complements the overall look of my system .
Pros: Decent price, nice finish, easy to assemble, versatile placement, speaker wire management.
Cons: Speaker wire management could be better
For price very nice. Solid and sturdy.
Pros: Perfect height for surround speakers around couch . Good price.
Cons: Not crazy about plastic shield for speaker wire,but it works.
It's easy to assemble if you read the directions carefully and follow all their recommendations. The speaker stands are very sturdy and have a beautiful finish.
Pros: Beautifully finished and very sturdy
Cons: None to speak of
These stands are great! Easy to put together and my Audioengine A5+ speakers fit perfectly on them. They have a good weight to them as to not tip over so easily. I would definitely buy Sanus products again!! The only reason I didn't give it 5 stars is because the foam pads that I could use on the top to keep the speaker were not there. Luckily, the A5+ have a foam lining on the bottom to help it not slide too much.
Pros: Good looking Good weight. Nice color
Cons: Missing the foam pads that you stick to the top base where the speaker sits.
Stands are very good quilting. Very easy to put together. Only Minor issue is a bought the 24 inch stands,and they are a little wobbly with snell book shelf speaks.
Pros: Quality, Good instructions Not difficult to assemble.
Cons: To be a little more sterdy
The Sanus NF24 was the perfect listening height, when lounging in my couch. I paired these stands with my Klipsch RP 160m speakers and they look great. Delivery was on time and had no issues. When it comes mail order shopping and customer service for electronics and home theater. No one does it better than CRUTCHFIELD..!!!
Pros: Good solid stand. Looks nice.
Cons: You'll need to select which stand foundation to use on carpet or floor. Can be lil unstable, if not don't correctly
Beautiful Stand, easy to assemble, great price.
Looks great with my new Elac speakers! Easy to assemble.
The speaker stands are stable, attractive and affordable. There is quality in the construction and easy to assemble. The proof-My Wife loves them!!
good sturdy stands, pretty easy to put together, good looking work well to get my bs speakers (klipsch) off the floor
Pros: sturdy, look good and do what they are suppose to
Cons: the wire channel is small, no big deal
Perfect size for bookshelf size speakers, look great, and the build quality holds up great after 2 years with recent moving!
Just purchased these for rear speaker set-up. Got the rosewood to match speakers, look great, easy to assemble, sturdy. Add the rear wire protector piece before you screw on the top, much easier. These stands are level, only unlevel flooring would cause an issue! Don't have a speaker taller than 12" on stand, if speaker is larger you'll need a bigger base. Good product, great price!
Pros: Great looking, easy assembly.
Great stand great price
Great stands. Really like the wire channel on the back of the stands to conceal the wire and the carpet spikes for stability. Sound quality of speakers improved since moving them off the floor. Bass is tighter and highs clearer. Black finish on stands looks great. Would buy again.
Pros: Stability, looks
Good, quality stand. Better constructed and heavier duty than I would have anticipated, especially at this price! Would fefinately buy again!
Pros: Construction Quality Heavy duty
The Sabus nf24 speaker stands are excellent product to recommend any friends to Crutchfield in the near future. Thanks!!! and a happy holidays.
Pros: All good!!!
These Sanus NF24 speaker stands are exactly what I was looking for. They are clean and stylish in appearance without being overbearing. From the structural side, they were extremely easy to assemble while providing a sturdy foundation to supporting my Klipsch speakers. The wire management covers required a bit of patience to install along the back of the vertical post, but once installed offer a clean finish while hiding the cables.
Pros: Clean appearance, sturdy, easy to assemble
Cons: Wire management covers require a bit of patience to squeeze them into place
Beautiful stand for the money. Easy putting together.
I bought a pair of Klipsch Reference Premiere RP-160M bookshelf speakers and needed a pair of stands for them. Good stands for those speakers. They put the tweeters at ear level. Only bad things were the screw holes were a little loose. A broken in half round toothpick filled the hole nicely and let the screws tighten up well. One of the posts was a little out of square and the top plate was not level. A business card folded in half and inserted in one side leveled the plate. I'm still finding the sweet spots in my music room for these speakers and will take the rubber feet off and install the spikes when I find them. Very sturdy and the wood grain post helped accent the wooden furniture.
Pros: Sturdy. Wood post matched furniture. Perfect height for the speakers I bought.
Cons: Screw holes a little big. One post not cut square.
Great speaker stands. Well made, sturdy and good looking. Quick and easy assembly. Very good stands for the price.
Pros: Good price Nice looking
High quality materials and very easy to install. The wire cover on the back is a poor design and hard to install. I gave up. This wasn't important to me so I am completely satisfied with the product.
Pros: Easy to assemble. High quality materials.
Cons: Rear wire cover design is poor
The stands are easy to assemble, have a large enough top plate to handle larger, older generation bookshelf speakers (NHT SuperOnes), and are unobtrusive.
Pros: Quick and easy assembly, a good value for the price
Cons: I'd have preferred to find something with narrow metal supports even more unobtrusive, but the selection of speaker stands available on the web for older, larger bookshelf speakers is not that great.
These stands are perfect for the Polk Audio RTi A1 speakers. Crutchfield recommended these stands as an excellent match for the speakers. Assembly was easy as the instructions are quite simple. Other reviewers have complained about the plastic piece that covers the wire run. I had no issues bending the plastic and getting it into the grooves. Just use some patience. The stands are an excellent match to the cherry finish on the Polk speakers as well!
Pros: Simple assembly Attractive Perfect size
Does the job it's made for concealed wire cover hides wires but the holes are to small on the top piece for banana plugs to go though bottom holes are ok.looks good with small speakers on them.
First off let me start by saying that I normally don't leave reviews for items purchased but couldn't resist when I was reading the reviews left by others for what I believe is just a lack of knowledge on there part. I purchased these stands to support my Polk TSX220B speakers that I am using for fronts in my 5.1 setup. They are made sturdy and have a nice matte black finish. I honestly wouldn't put a speaker any bigger dimensionally than what I have due to the small top plate. I have read all the reviews on these prior to my purchase and saw how much difficulty people were having putting these stands together, reading the instructions and installing the vertical wire cover on the back. I even read complaints about them not being level. It only takes a #2 stubby phillips screwdriver so you don't strip the screw holes from over tightening them. As far as these not being level, try moving them to something you know that is level like a granite counter top. I will bet it's the floors in your home are not level not the speaker stand. Overall these are pretty nice stands for the money and I would definitely purchase another set but maybe a "open box" special next time from Crutchfield.
Pros: Easy to assemble, Multiple choice of feet options, Decent quality overall.
Cons: Wish the black finish could have a little more gloss to it and maybe Sanus could provide small & large top plates for different size speakers.
I never thought that speaker stands could improve the quality of my Vinyl and other music but I was wrong! These were the best little investment into my sound system and the price is tough to beat. :)
Nice stands but the hardware for attaching the top plate is terrible. Screws are cheap and not robust enough. In addition the screw heads stuck up too high. I had to replace with something longer and thicker. Typical made in China. Overall the stands are decent that aside.
Pros: Nice design.
Cons: Made in China. Cheap hardware that had to be replaced.
beautiful stands, price is right but the corners are not level...had to use rubber shim just to make it touch the floor evenly... will buy it again
Pros: real nice and easy to assemble
Cons: uneven base
I have had the same Norman Lab speakers for 40 years. I have hung them from the ceiling, parked them on book shelves and, most recently, sat them upright on the hardwood floor. As I age, I grant everything that has a number of years on it a great measure of grace. My speakers have not seemed as rich for the last 15 years of sitting on the floor and I was clearly aware of the difference but unwilling to replace the speakers. My audiophile cousin suggested raising them to improve what they might be capable of delivering. WOW, what a difference elevating them to seated ear level on these well priced, unobtrusive looking, sturdy speaker stands. Love my Sanus NF24 Speaker Stands. Wish I had done this years ago.
Pros: sturdy, easy to assemble, unobtrusive in appearance, choice of carpet or hard surface footing, WELL PRICED.
Cons: I had no issues with this product.
Great stands for the money
Pros: Easy to assemble, screws set nice and tight, solid wood pillars, complement cherry wood speaker cabinets. Choice of feet or carpet spikes for the base, pins or rubber corners for the speaker platform.
No issues - went together fine, looks good and price was right...
A decent value, they look great from afar but are far from great. Nothing is close to being truly square or aligned on my set. The top plate is at a very noticeable angle when compared to the base. The base is also not level and I have had to use shims to get all four corners touching. Even with the base secured, they are very wobbly once assembled. The center post feels so flimsy that a child could break it from the base with ease. I am actually a really worried about them tipping in an earthquake or something. They will suffice until I can find a better solution long term. Also, mine was missing a carpet stud (came with 7 of 8), but since I have hardwood floors it wasn't a big deal to me.
Pros: - a reasonable value for holding up bookshelf speakers
Cons: - no adjusters on the base to assist with leveling; had to use shims - poor crafting tolerances; components are far out of alignment - wobbly and flimsy - missing components
Looks great and was easy to assemble, just be careful when tightening the screws to not overtighten. A little dab of liquid soap helps to lubricate the screws. One of my bottom pedestal came dented from the factory. I used some black marker to fill it in. That's my only compliant.
Pros: Sturdy with good looks. Brought my bookshelf speakers to a proper height. Big difference in sound stage and imaging.
Cons: Slight dent on pedestal base but black marker covered it up.
Went together easily, nice looking, had to drill hole for speaker wire a little to use monster cable,so instead of using spike`s, I used non skid fabric & is better than spike`s digging hole`s in speaker`s, but the Cherry is nice looking & work well.
Exactly what I was looking for.
Pros: Very nice finish, very sturdy and easy to put together, supports my Polk fx500i surround speakers. Some reviews stated that it was difficult attaching the wire cover to the neck of the unit. Easy solution: Slide the wire cover up the neck first. Just start at either end and run the cover through the groves rather then trying to press it into the groves at the very end.
I'm on the fence between 4 and 5 stars but went with 5. Stands are very nice. But the long piece of plastic on back that hides the cable cracked on both when trying to bend it into a 'u' shape to slide in grooves. But I can live without that. I just used some black electric tape to hold wire in place up the shaft and it looks nice. But I gave it 5 stars because I was pleasantly surprised by rubber sticker feet I could use as alternative to little metal pointy feet picture shows that speakers rest on. I knew my speakers weren't rectangular in size and back of speaker would fall in between metal feet. I used the rubber sticker feet option and got to place stickers where I wanted... and they hold speaker in place exceptionally well. Great traction. So I'm very pleased with stands. I think they look great. And wide bottom plate really holds a heavy surround bookshelf speaker in place without worry of it being tipped over.
A good pair of stands they match my speakers (cherry) like they came with them
Pros: Strong and shure footed stands
For the price I was pleasantly surprised at the quality of these speakers. They provide a very good foundation for my Polk RTi A3 and the fit and finish are very good. The cherry color of the stand is very close to the cherry finish on the Polk speakers.
Pros: Perfect match for the speaker. A very reasonable price.
Cons: none noted at this point.
These are a nice set of stands which handle my Polk RTi A3's just fine. They are heavy and stable and the rubber feet work well on my hardwood floors. I was a bit worried that they would be tippy but they are not at all. I found them very easy to assemble and well made, really wonder why people had trouble putting them together. Overall I found the quality high and they look very good, well worth the price.
Pros: Well made Easy to assemble Look very nice Stable
Good sturdy base for set on a hard surface verses carpet. They support a pair of 10" x 10" x 20" bookshelf speakers- no problem.
Pros: Clean lines, stable.
Cons: There could be a better solution for the pads on the speaker table surface, perhaps larger, more of them. The plastic cover on the back of the pedestal meant to cover the speaker wire is awkward and difficult to install but not impossible. I would recommend bending it a bit before trying to place it in the channels meant to hold it in place.
Overall this stand is not bad. I don't get any vibrations or any rattling when playing music through the Polk RTI A3's they hold. They do have rubber feet for hard wood floors and spikes for carpets. Having carpet I used the spikes and it hold the speaker well and does not tip. The cord management panel was a little tough to put in. Unfortunately you have to force bend the plastic panel to get it into the grooves, but once its in it looks great. For a budget speaker stands this is a great deal.
Pros: - Looks/style - Price - Good center of gravity, even for heavy speakers (16 lbs) - Parts for carpet and hard floors
Cons: - Build/Quality control, some screw holes were a little lose or tight as some other reviewers have stated - Setup, the plastic panel for the cord management needs a little force to get in the grooves correctly
They worked great for my Klipsch RB-61 II.
Pros: Wonderful, easy to assemble. After reading some other reviews, I wonder if people know how to get dressed in the morning. I know my 6 year old grandson could have assembled this in 10 minutes, 5 minutes a piece. In other words, great product, great look and great functionality. Friends have commented that I must have spent big money on these as they look amazing.
Cons: None. I wonder in competitors type in smack to give a bad rap.
Decent stands. Look good, but are a little tricky to assemble.
Pros: Really good looking, hides the wires well. Wood, not plastic.
Cons: The drill holes are hit and miss. Some too tight, one or two, too loose. Instructions are only marginally helpful.
The finish is not great. The speaker wire will not fit in the groves on the back side of the platform . The directions are not great. The security of speakers on the pedestal should be better design. I feel these are over priced.
Pros: A space saver
Cons: Wood finish not the best, slots for wire need to be wider, pr,ice too high
Great speaker stands. Well built and heavy. Come with a couple different kinds of feet options, one for carpet and one for hardwood or tile. They hold my Klipsch RB-81 II just fine. Oh and they assemble quickly. I highly recommend them.
Pros: Great looks, wel constructed, and come with optional feet.
Cons: None that I can think of.
Overall Good stands. I used them for my Klipsch Ultra 2 speakers Front Left, Right, and Center Channel. Sold and sturdy. I used the carpet spikes that comes with the stands and the hold great. That back plastic that is used to hold the cables is hard to get in. I think the design could have been better. But after you get it in, it does what it's supposed to do. Still a great purchase.
Pros: Sturdy. Good build.
Cons: Hard to install the plastic cable management holder. Poor design.
I have the Polk Audio RTi A3 bookshelf speakers. These stands are the perfect size and height for those speakers. I have hardwood floors and used the rubber triangles to keep the speaker sturdy on the stand. My sound is even better, now that the speakers are at ear/face height while sitting on the sofa. I was looking for sturdy stands and these fit the bill. Assembly: All that was needed on my part was a phillips-head screwdrivier (I used my electric drill with the phillips-head bit to get the screw all the way in as, once the screws were most of the way in, it got a little tough). Easy to assemble, though the cord management system (a piece of black plexiglass) is a little difficult to get in the back grooves. Looks: I just wanted something that could "blend in" with the current setup and black was the best best. Nothing fancy. Just simple stands.
The stands work great,the key is carefully assemble each and you should not have any problems!
Pros: THe 24" height is just what I wanted with P163 for midrange blend with P363.The base fit is just right because the higher you go the top base is smaller on other models!!
These are nice looking stands. The wire concealing device is simple if a little tricky. They could be a bit more sturdy.
Pros: Nice Looking
Cons: They wobble a bit.
Sturdy stands, easy to assemble. Given they are 'entry level' stands, give or taken, I expected them to be less sturdy than they are. They come with carpet spikes and 'peg' stands you can use, and the top plate can use spiked pegs or rubber mats to place the speakers on. The cable hiding cover on the back gets the job done quite well, however I had some trouble getting my speaker cable through. I had first installed the speaker wire cover, then fished the speaker wire through the bottom, up the cover and out the top, but there wasn't enough room at the top to get the speaker wire + banana plug through. If the cover was an inch or two shorter, it'd be perfect. I just had to remove the top part of it to get the cable through. No big deal, but just a heads up.
Pros: Great price for a sturdy stand Multiple installation options
Cons: Speaker wire hider could be improved, but works well once installed
The stands look nice and fot the money they are not bad.The only problem I saw was the holes for the screws for the speaker bases were drilled too large and the screws did not tighten.I inserted some wooden toothpicks in each of them and managed to tighten then pretty good.I have a feeling since I used velcro on my JBL E30's to make sure they don't fall off that when I want to take them off the pedestals the bases will probably pull the screws out.When that happens I will just fill the holes and redrill.
Pros: They look good and are fairly sturdy.
Cons: The screw holes were drilled too large.
The Sanus NF 24 stands are not only sturdy (the primary requirement) but they actually look good. They would probably be at home in any setting. Very happy with my purchase.
Attractive stands. The Cherry finish is beautiful. I just wish that they make a larger ( rectangular) top plate to better support bookshelf speakers like the Polk Audio RTi A3. I will have to make my own.
Finish is good . Half of the screws would not hold : either the predrilled holes were too big or the screws were too short . Same problem in the new shipment . This problem was corrected with longer screws . Vinyl cover for wires not usable.
Pros: Good finish . Reasonable price . Excellent service from Crutchfield
Attractive stands. Look and feel sturdy, with a glossy rich black finish. Speakers sound great on the stands. Unfortunately, I'm very disappointed with the quality control--which is the reason for the lower rating. The brass speaker studs would not fit on the top plate unless the pre-drilled stud holes were enlarged. Its not difficult to enlarge these holes--but why couldn't this be done at the factory. More significantly, the top plate and the base plate would not line up on one stand. I can't figure out which set of mounting holes (the pillar or the bases) are out of alignment. I am debating whether its worth the aggravation of disassembling, repacking, and returning this product. One other QC issue, the "patented" wire covers do not work with the recommended Monster speaker wire I was a little surprised at the size of the top plate ---its small in relation to my speakers. The speakers are not secured to the stand--they sit on the top plate. Looking at other similar stands, this appears to be the norm. I would be concerned if there were children or pets in the house.
Pros: Rich finish, looks good when assembled. Speakers sound great when mounted on the stands.
Cons: Quality control lacking. Possible issue--the speaker could be knocked off the stand under some circumstances Speaker wire covers would not fit
The stands have a nice finish and are solid when put together. Because I put the top shelves on upside down, the holes were not beveled (they are on the other side) I beveled them before I knew the other side was already beveled. This weakened the holes. I contacted Crutchfield and told them I needed to purchase new top portions, but they were good enough to send me a new set no charge - wow! Great service.
Pros: Sharp looking. Sturdy. Great customer service.
The stands were easy to put together, look nice, they put my infinity ps163 bookshelf speakers at the right height, which made a big difference in my surround sound, which I am using for front channels.
Pros: easy to put together look nice
They work well and are easy to assemble.
Pros: Look Good.
Cons: The speaker shelf is too small. It would be too easy for someone to topple them or cause the speakers to fall off the platform. I don't know why they didn't make them longer.
Pros: Perfect height. Perfect size. Love Love Love them. Great price.
Called Crutchfield to ask what stands I should get for my RTI A3's these are what they advised. I think the stands are awesome they look great, hold my speakers, and easy to assemble. Would recommend to anyone to buy these stands they are the perfect height for couches. I gave this product 4 stars though because of the speaker wire placement the plastic thing they gave me was junk one worked but was a pain and the other one I broke and taped the wire to the stand with duct tape, but the stands look awesome.
Pros: Look great
Cons: Plastic things to hide speaker wire are worthless
good finish, easy assembly
Stands work and look fantastic. Using with a set of Polk TSi 200's, and speaker height is perfect.
I bought these to hold the Polk RTi A3 speakers I bought for my brother. These assembled easily. I have to say I though the cables might be hidden inside the verticle posts, but they ran along the back which worked, but I thought they might be more hidden. The speaker cable hole going from the post to the actual speakers fit the 16 gage speaker wires but would not be wide enough for 12 gage wires.
Pros: Attractive design (cherry and black) Assembled easily.
Cons: Cable mangement could be better, but sufficed with no real problems.
Okay, I will admit, if I could live without speaker stands, I would! I like my speakers buried in the wall behind a nice mesh cover. Unfortunately can't do that in this home, so speaker stands are a temporary measure, but these are pretty cool looking.....for speaker stands!!! Easy to assemble and good price too.
This is a good, basic entry-level speaker stand. I had no issues assembling and fit/finish are good. Cable management system is simple but effective. No purchase regret with this.
Pros: Good, economical entry-level stand.
Cons: None given it's price and function.
Works well for the TSi200 speakers will purchase again if I need
Pros: Very sturdy for the brand of speakers.
Cons: I would purchase again in a bigger size.
These stands are sturdy and well constructed. The cable management feature is nice but is tricky to install. My fairly large Definitive Technology Studio Monitors fit well on them.
Pros: Easy assembly and sturdy construction.
Cons: Not a big deal ,but I found that the stands are slightly shorter than specified 24" height. They are actually 22.5" without the rubber feet. Add .75" for the rubber feet.
Excellent and nice looking. Very solid base for my large bookshelf Polk Audio Speakers. Nothing negative about them.
Pros: Easy to assemble and mount speakers. Plus at a fair price.
Cherry middle is solid and good quality, attaches well to the base.
Pros: Price, solid wood
Cons: I would maybe like "swappable" top plates. Some bookshelf speakers are small, others are big.
I was pleasantly surprised when the stands arrived to my home. They look nice, easy to assemble, and meet my needs. I would definitely purchase them again.
Pros: nice looking - sturdy - the right height
Really nice stands.Easy to assemble and the way they hide wires is very sleek. I would definitely purchase them again.
Pros: Solid construction and easy to assemble.
Cons: I almost missed the covers that hide the wires.....not really mentioned in the instructions.
Good product for what it is, I was curious if these could be shortened if needed, after receiving them , they could be easily shortened if you wanted to.
NICE STANDS LOOK GOOD. INSTRUCTIONS A LITTLE LACKING! I gave them 4 stars instead of 5 because i think they are a little to high priced.
Pros: Crutchfield is the best all arround. Hands Down!! Been shopping here over 20 years.
Cons: Holes for speaker wire on the small side.
These stands are sturdy and well built. They look nice and I recommend them. They are a good value for the money. Follow the instructions carefully and be sure to use the right screws in each hole when you put them together. I started to put them together incorrectly by not paying enough attention to which screws went where, but it was simple to fix; just remove them and start again. If a screw seems to be hard to tighten, you might be putting it in the wrong hole. I recommend using velcro tape to ensure speakers do not fall off from vibration (of the speakers themselves). A small piece (approx. 1"x2") on each corner of the base where speaker rests on the stand should be sufficient.
Pros: These 24" stands are the perfect height for "bookshelf" speakers.
Cons: The cable mangement cover is a little hard to install and remove, but it provides a good option to hide the speaker cables. Note it is just a cover; it is not built or intended to "wrap" excess cable.
Ordered these off of the outlet site. Arrived within a few days, easy to setup. They look great, my only criticism is the size of the cable guide holes, which are barely large enough for my Monster cables on a normal setup. I've got my B&W monitors bi-amped, so I can't use the cable guides until I make the cable holes and guides larger.
Pros: Great service from Crutchfield, easy to setup, look great (even my wife says so!)
Cons: Cable guide and access holes need to be larger if using Monster cables.
Nice looking, sturdy, and easy to assemble. (I use them on oak flooring.) The rear panel that hides the wire is easy to install - I didn't bend it enough to start. You do have to really bend it to fit into the slots, but the panel is more flexible than it appeared at first - don't worry about it. It seemed easier to insert them by starting at the top and working down.
Good product for the price. Supports my new Axiom M22's just fine!
Bought these to replace a brand-new set of Sanus BF24Bs I had bought but was not satisfied with (appearance). These are much better looking, well worth the extra money. Box comes all beat up. My carton was so badly damaged that it was missing the hardware kit and instructons. I was shocked that the main parts appeard to have held up fine - the box was literally a mess. Crutchfield 2nd day shipped the kit - hassle-free. The stands went together well, but I noticed one of the bases had been damaged in shipping. Crutchfield 2nd day shpped a replacement - hassle free. Interesting to note that both replacement shipments came wrapped as if they were fine china - bubble wrap, foam - impossible to damage. If only the original stands came out that way. 4 stars instead of 5 only because of the carton quality or Crutchfield's shipping method. I would definitely buy them again.
These are great speaker stands, the cherry against the black looks great. The stands are sturdy and strong,very easy to assemble and the wire managment hides the wires perfectly. We are using the steel pegs to anchor into the carpeting. But with all the configurations, you have several options to choose. I gave it a rating of 4 stars, only because the tops could (should) be larger. My Polk RTi-A3 speakers are larger ( they do fit on them).But I would have paid a little more, if Sanus included an extra pair of tops for larger speakers it's a 5 for sure. With that said, you get a great,good looking stand, for a good price point,I would highly reccomend this product
I was pleasantly surprised by how nice these stands were. Very easy to put together (and I'm a girl!). Got these for a pair of B & W 686 speakers that weigh almost 11 lbs, and I am not worried at all about them getting accidentally knocked over. Great stands for the price!!!
Everything is included and the stand are very pretty, but in order to feel better with my self in relation to the speaker In order to supports the 25 lbs.,what is ok, but you better, strengthen, the superior platform, adding carefully/carefully, two additional wood screws, i am using this stand with my, Infinity Primus P152. Single bookshelf speaker Weight (pounds), 13.5 nd once I added this two screws, I felt much better in relation to how secure the speaker are when you them over the stands
I brought these stands for infinity bookshelf speakers. The primus 152' s fit perfectly on the stands. The stands have a real clean and expensive look to them. Thanks again Crutchfield.
The stands arrived in a fairly torn up box, and, predictably, they had gouges, etc. They are just OK, not terrific.
Solid stands that hold 22lb. speakers with ease. Made well. Easy to put together. This is my second pair of these stands, the others have been used for years and are still great.
I ordered these in cherry to go with a set of cherry Polk LSi9's. They arrived in great shape. It is a snap to put them together and takes about 5 minutes each. Two screws in the top and two in the bottom. Screw the four feet on each one and snap in the plastic channel that covers the speaker wire and you are done. These are very solid and are well made. They look great with the cherry finish speakers and appear more as a piece of upscale furniture. The speakers I have are rather heavy and the stands are quite adequate to hold the load. Can't go wrong with these. Simple to assemble, very sturdy, and quite attractive.
I give these stands 5 stars in agreement with the previous reviews. A couple of points not mentioned in the other reviews: 1) I am using the stands with the supplied spikes on carpet and I find the stands to actually be 23" high 2) it's hard to discern from the picture, but the pole is not circular but more of an egg shape (imagine a flat bottomed egg lying on it's side with top pointed towards you). The pole is also solid wood, not hollow, so you cannot add weight with sand like you can with some stands, but they have plenty of substance without it 3) I have the stands facing my seating area and find that I do not need to insert the plastic glides in the back that hides the speaker wire. The pole itself does the job. There are holes towards the back of the top plate and bottom base that you run the wire through. I find this is enough to keep the wire in place 4) I think it goes without saying, but you want to make sure the speakers that you place on these are at least 8" wide as the top plate measure 7.5". 5) Lastly, these stands look great.
My first impression after removing the parts from the box were that they are heavy and dense. The speakers stands are solid which makes me feel like they are of a good quality. The assembly of the stand was very simple with only a few screws to piece it together. The instructions were fine, but I'd even say you could assemble these without instructions because it's that simple. The hardest part of the assembly was the plastic wire cover along the back. The cover was rather difficult to bend and insert into the back slots. It took a few minutes to get the piece in correctly but once it's installed, I won't have to play with it again. I found that once I made sure the slots were clear from debris that the plastic pieces installed a little bit easier. I'm using these speaker stands with a pair of Model 6 speakers and I'm very happy with my purchase. There is no rattle or noise from the stands and they are of the right height for the speakers to place the tweeter at roughly ear level while sitting down. Crutchfield processed my order very quickly and the product was shipped the very next day. The standard ground shipping arrived in only a few days with the product undamaged. I was very happy with the experience and would recommend both the speaker stands and Crutchfield to anyone. I would buy this product again if I ever needed more.
The fit and finish, instructions, and sturdiness are top notch. The additional few dollars for furniture quality appearance is also much appreciated as these match my compoment shelf. I was glad this height was available, as it places the speakers just below my 60 inch screen. Crutchfield shipped promptly and there were no scratches, etc, as I have always run into in the past with other big box stores. I would buy these again. i am very satisfied.
These are nice but wish I had chosen the 30 or 36 inch model. Have had no problems and fit-n- finish is good.
Overall, a very nice, functional stand. Provides the perfect audible speaker height for bookshelf type speaker. 2 Negatives: First, the plastic speaker wire cover is a bit unwieldy. The design could, and should be improved. Second, the speaker platform is dangerously close to being too big (sticking out from under the speaker). It could be a little smaller. Just BARELY fits under Polk RTIA3's. Be sure to measure your speaker bottom and compare it to the dimensions of this speaker stand. I did, but had less free space to work with than I had planned on.
These are great little speaker stands. The central column is hardwood (it looks like Cherry, but I'm not totally sure it is) and the top and bottom platforms are MDF or some other composite, but very strong. It comes with all the necessary HW to put the stand on a carpet (using spikes) or wood (using rubber feet). It also comes with little brass cones that mount on the top platform, so the speaker just rests on four points. We have downstairs neighbors who are noise sensitive and we have yet to hear complaints about sound transfer. I'll probably buy another pair of stands for the guest room.
These speaker stands were quite easy to assemble & actually more attractive than anticipated...A pleasing addition to any decor....As usual, Crutchfield website was very informative in assisting with the proper product selection and stands were delivered promptly without incident...Thanks Crutchfield.
Design: Each base is made of anti-resonant MDF finished with three coats of hand-sanded black lacquer. Adjustable floor spikes are included to provide stable footing on carpeted floors, and to further minimize resonance. A single sturdy black pillar supports the low-profile top plate, which features a choice of neoprene isolation pads or brass isolation studs. Plastic wire covers give your speaker stands a neater look by concealing the wires completely.
Spiked Feet: The spiked feet pierce the carpeting and anchor the stand to the floor, keeping the speaker stable and reducing resonance. With the spiked feet installed, the stand height is adjustable from 24.75" to 25". Note: If you do not wish to use the spiked feet, Sanus has included plastic feet that will not scratch your floor.
Brass Studs: These upward facing brass studs hold the speaker stable and minimize resonance.
Neoprene Pads: The sharp points on the brass studs can scratch the bottom of the speaker. If this is of concern, you can use the supplied neoprene pads to stabilize the speaker.
Weight Capacity: Each speaker stand can support up to 25 lbs.
Top Shelf Dimension: The top shelf is 7-3/8" wide and 7-3/8" deep. Note: For use with smaller bookshelf models. The NF24's height makes it an ideal solution for mounting your surround speakers.
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.
I have another set of stands from Sanus for the past 5 years and I am very happy with the product[ Lloyd Sep 24, 2017 ]
Sleek looking, and good fit for rear surround speakers[ Louis Aug 20, 2017 ]
I needed them for the rear speakers[ Anthony Frank Aug 15, 2017 ]
They seem to be about the right size for Klipsch Reference Series bookshelf speakers and provide a good trade-off between price and quality.[ THOMAS Aug 01, 2017 ]
Recommendation by Crutchfield advisor[ Jerry Jul 12, 2017 ]
I have two bookshelf speakers standing on wooden tv trays that are 25" tall. The Sanus NF24 is just the right height and surface area for my speakers in the bedroom.[ manny Jul 11, 2017 ]
price,the right height for me, looks, positive feedback, [ james Jul 10, 2017 ]
Nice looking stands[ SERGIO DA Jul 05, 2017 ]
Needed to raise back surrounds (Polk RTiA3) and these units worked perfectly. Easy to assemble and look great with the ability to hide wiring. From reading prior reviews I thought I might have a problem with them being unsteady but they work great and I'm glad that I purchased them.[ JOHN May 23, 2017 ]
Looks and price[ MARK B May 15, 2017 ]
Needed some stands for my Boston Acoustics book speakers.[ Tanner May 14, 2017 ]
They are a nice complement to the speakers that I just bought[ eomr Apr 06, 2017 ]
Best value for the money. [ HECTOR E. PEDRO Apr 04, 2017 ]
very well built, proper height.[ Neal W. Jan 07, 2017 ]
Past experience with the product.[ ROBERT Dec 31, 2016 ]
The product looks well designed, the right height, and definitely the right price.[ Daniel Dec 22, 2016 ]
Paul suggested![ Vasan Dec 13, 2016 ]
Relatively positive reviews coupled with tech advisor suggestion.[ David Nov 29, 2016 ]
Fit the speakers I ordered[ Gene Nov 09, 2016 ]
It was suggested by Crutchfield customer service for the Klipsch speaker I ordered[ Anand Oct 25, 2016 ]
I needed good speaker stands that were affordable.[ J Sep 12, 2016 ]
I like the color and speakers did not have a good option to mount. I can also move them.[ Mathew Aug 25, 2016 ]
24 inches was a close fit for the height that I wanted my Paradigm SE1 bookshelf speakers. They were also the best price for this item.[ Derik Jul 28, 2016 ]
came highly recommended from def tech associate. Great height for low couches for ideal tweeter location at 30-34 inches.[ Cartic Jun 18, 2016 ]
Ryan said that is what was recommended for the HD6 I bought.Ryan's Bio: http://www.crutchfield.com/Support/Bio.aspx?bio=5 [ jeffrey Jun 11, 2016 ]
I have owned several SANUS products for the past 20 years and currently still have/use them for audio/video equipment.[ Patrick Feb 02, 2016 ]
Good reviews, good looks, size and price.[ Orlando Jan 04, 2016 ]
Matched Infinity stands[ Robert Jan 03, 2016 ]
Crutchfield service recommendation.[ Timothy Dec 26, 2015 ]
Classic style & correct height for the speakers we selected.[ Richard Jul 04, 2017 ]
Simplicity of design and the cherry will match my speakers.[ Elizabeth Jun 28, 2017 ]
This stand appears to be the best choice for the speakers I have in my home entertainment system. My expectation is the sound field will be elevated to a more comfortable listening height and a better listening experience. I will make that judgment once I have these in place and hear what the results are.[ Gregory A. Jun 14, 2017 ]
Wanted 24" high speakers that looked good. Like the cherry/black coordination. Very positive reviews.[ Guy May 13, 2017 ]
needed something look good , put bose 2.2 on them[ karl Apr 13, 2017 ]
Matches the Polk speakers with the cherry finish.[ Sheila Apr 08, 2017 ]
I'm familiar with the brand. Quality is high.[ DWIGHT D Mar 17, 2017 ]
They look like a perfect match for the cherry Polk speakers i just bought[ DANIEL Jan 21, 2017 ]
Perfect size for the speakers I ordered and I like the Cherry vaneer.[ Mark Jan 13, 2017 ]
I bought several of these in the past, and they've worked well for me. A good value.[ Ralph Jan 10, 2017 ]
Price. Reviews. Nice 7" base works for a lot of speakers-I have quite a few. I like the cherry look-walnut would have been better, though.[ Joe Dec 17, 2016 ]
sanus reputation, price and customer reviews[ jeanine Nov 24, 2016 ]
Needed a speaker stand for bookshelf speakers. Some cherry furniture in the living room where the audio is.[ Rob Oct 25, 2016 ]
Looks like a solid stand for my speakers.[ Barbara Oct 12, 2016 ]
Sleek look, just the right height for my klipsch bookshelf speakers[ Amrik Aug 17, 2016 ]
Look good, right size for my speakers.[ Carl Jul 01, 2016 ]
They seem like a good blend of quality and price.[ John Feb 10, 2016 ]
I have had a pair of these for a few years. They are soundly made, well thought out and look great.[ Matthew Jan 02, 2016 ]
The reviews sounded really good.[ RAYMOND Dec 09, 2015 ]
Thanks for your question. The shipping weight for both stands is listed as 14.8 pounds. Hope that helps.[ Kenny Nov 27, 2016 ] Staff
We do list these stands as being compatible with the Chorus 706 speakers.[ Jeff Jul 01, 2015 ] Staff
I forwarded your question to an Advisor and they responded with the following: These stands will work with your Klipsch RB 81 speakers.If you would like to discuss further you can contact an Advisor directly by phone (1-800-324-9695) or online chat.[ Krissy Feb 25, 2015 ] Staff
We have not received any answers from other customers on your question, and have escalated it to an Advisor. We will post the answer as soon as we have it. If you need immediate assistance please contact an Advisor by phone (1-800-324-9695) or online chat.[ Krissy Feb 24, 2015 ] Staff