Flat-Panel TV Stand: The SANUS Flat Panel Series PFFP is a
two-shelf flat-panel TV pedestal with sleek lines and a custom-blended
black finish to offer a striking look that complements modern AV gear.
High-quality construction and open architecture maximize airflow and
provide the enhanced strength needed to handle even the largest
televisions. Innovative aluminum column supports large TVs with grace.
Features include a large wire management channel and a sleek, durable
TV Compatibility: The PFFPB-01 TV stand has a
universal TV mounting bracket at the top of the pillar that is designed
to fit flat-panel televisions from 30" to 50".The stand can support a
TV with a maximum weight of 130 lbs.
Mounting Bracket & Hardware: Each monitor bracket
has multiple bolt holes and can accommodate vertical hole spacing (on
the back of the TV) up to 17.5" (444mm). Since the monitor
brackets can slide on the wall plate, the horizontal hole spacing on the
back of the TV can range from 2" to 26.5" (670mm). The PFFPB-01
comes with the following size screws to mount your TV to the bracket -
M4, M5, M6, and M8. Given the mounting bracket's range of motion, it
will accommodate the following VESA (Video Electronics Standards
Association) mounting patterns:
- 50 x 50mm
- 75 x 75mm
- 100 x 100mm
- 200 x 100mm
- 200 x 200mm
- 300 x 200mm
- 300 x 300mm
- 400 x 200mm
- 400 x 300mm
- 400 x 400mm
- 600 x 400mm
Virtual Axis Technology: Once the TV is secured to
the bracket, you can adjust the TV's angle. With the Virtual Axis
fingertip tilt system, the TV can tilt 12° up or down, and you can lock
the position by simply tightening a knob on each monitor bracket. The
pillar design also allows you to adjust the height of the bracket before
you mount the TV.
Adjustable Shelf: The PFFPB-01 features one
adjustable, tempered glass shelf. With the TV bracket mounted in the
highest position, you can move the adjustable shelves up and down within
a range of approximately 2.5'. This range will vary depending on the
size of the TV. The adjustable shelf measures 35" wide x 16.5" deep. The
shelf can support a component with a maximum weight of 50 lbs.
Bottom Shelf: The base of the stand, which serves as
the bottom shelf, is 43.25" wide and has a maximum depth of 23.125". In
front of the pillar, the shelf has a depth of 18.1875".
Wire Management: The pillar has an internal channel
that keeps the wires and cords out of sight.
Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.