Skip Navigation

Chief SYSAUP2

Universal ceiling mount with surge protector for projectors up to 35 lbs. (Black)

Item # 051SAUBP2

This item is no longer available.

Shop all Projector Mounts

Overview

Our take on the Chief SYSAUP2

The Chief SYSAUP2 universal ceiling projector mount features a built-in surge protector and power filter. Your projector is shielded from damaging lightning strikes and power surges — thanks to the system's redundant protection circuits. The power filter helps even out the minor current irregularities that can damage your equipment over time and interfere with its performance.

Protect your investment

The Chief SYSAUP2 universal ceiling projector mount features a built-in surge protector and power filter. Your projector is shielded from damaging lightning strikes and power surges — thanks to the system's redundant protection circuits. The power filter helps even out the minor current irregularities that can damage your equipment over time and interfere with its performance.

Note: Installation by a licensed electrician is recommended.

Flexible installation options for your projector

The SYSAUP2 comes with the projector mount and support column preassembled, reducing installation time. The ceiling plate can be placed either above or below ceiling tile. It's also adjustable, to compensate for uneven ceiling tile grids. And you can detach the plate for pre-wiring before installation.

Simple adjustments

You can easily adjust your mounted projector with your fingertips, then lock it into position without tools. The quick-release lock keeps your projector secure, yet makes removing it for maintenance hassle-free. The support column can hold the projector tight against the ceiling, or extend it down as much as 12”.

Additional features

The support column has two channels for high- and low-voltage cables. The mount's compatible with standard 2-gang electrical mud rings. And the SYSAUP2 is UL-certified for safety.

Product Highlights:

  • mount and column preassembled for quick installation
  • built-in surge and filter module
    • surge protector with LED power indicator
    • redundant protection circuits
    • filters power fluctuations for improved performance
    • rated for 125V, 60Hz, 15 A
    • 1800 watt maximum
    • Note: installation by a licensed electrician is recommended
  • adjustable ceiling plate
    • can be placed either above or below ceiling tile
    • adjustable for uneven T-grids
  • detachable electric plate for pre-wiring
    • compatible with standard 2-gang adjustable mud rings
  • column extends from 0" to 12"
  • dual inlay channels for high and low-voltage cables
  • fingertip positioning with tool-free lockdown
  • roll: ±3°
  • pitch: ±10°
  • yaw: 360°
  • mounting hardware included
  • Q-Lock quick release lever with integrated key and lock system
  • weight capacity: 35 lbs.
  • overall dimensions: 7-1/4"W x 19-7/8"H x 24-15/16"D
  • weight: 25 lbs.
  • warranty: 10 years
  • Our 60-day money-back guarantee

What's in the Box:

  • Integrated AC duplex surge protector outlet and box
  • Projector mount and column assembly
  • Suspended ceiling plate assembly
  • Mounting plate
  • 4 Legs
  • Column trim-ring
  • Four M2.5 x 10mm bolts
  • Four M3 x 10mm bolts
  • Four M4 x 10mm bolts
  • Four M5 x 14mm bolts
  • Four M6 x 14mm bolts
  • Four M4 x 25mm bolts
  • Four M6 x 25mm bolts
  • Four M5 x 25mm bolts
  • Four M3 x 25mm bolts
  • Four 10-24 x 3/8" security bolt
  • Eight 10-24 x 5/8" bolts
  • 1/4-20 x 5/8" bolt
  • 10-24 x 1/4" bolt
  • Eight 10-24 x 5/8" bolts
  • Four M4 washers
  • 4 Spacers
  • 4 Screw adapters
  • Four 1/4-20 wing-nuts
  • 25' Security cable
  • 4 Cable-locks
  • 4 Wire anchors
  • Four eye-screws
  • Ceiling tile cutter
  • 2 Hex-keys
  • Installation Instructions
Reviews
Details

Hands-on research

Product Research

Features

Suspended Ceiling Projector System: Chief's SYSAUBP2 Suspended Ceiling Projector System is designed to mount a video projector in a drop-style ceiling and provides an integrated AC duplex surge protector outlet.

Compatibility: It can support up to a 35 lb video projector, and can be installed in 2' x 2', 2' x 4', 60 x 60cm, or 62.5 x 62.5cm ceiling grids. The Adjustable ceiling plate allows placement above or below tile and accommodates inconsistent T-grids. Its also compatible popular 2-gang adjustable mud rings.

Adjustments: The Chief SYSAUBP2 comes with an adjustable 0-12" column that also features dual inlay channels for high and low voltage cables. Once mounted, you can adjust the Roll (3°) , Pitch (10°), and Yaw (360°) of the projector.

Q-Lock Quick Release: The Q-Lock Quick Release Lever provides quick connect/disconnect oft he projector for service and enhanced security with an integrated key and lock system.

Integrated Power Filtering & Surge Protection Duplex Outlet: The integrated power filtering & surge protection duplex outlet features the SurgeX non-sacrificial multi-stage filtration and surge protection system. It helps improve the reliability and functionality of connected equipment by safeguarding them from high energy transients, lightning strikes, and electronic noise events that can cause damage to your gear.

  • Non-Volatile/Non-Sacrificial Spike Protection: The power filtering & surge protection duplex outlet can withstand 240 volts of AC continuous power without damage or loss of protection. It does not incorporate sacrificial components of any kind, effectively guaranteeing an unlimited service life without the requirement for testing and/or periodic maintenance. Its non-current limiting design passes full power on a regular circuit; redundant protection circuits.
  • EMI  Filtering: The power filtering & surge protection duplex outlet  utilizes a ferrite toroid based EMI filter to help eliminate line noise by up to 40 dB. Electromagnetic interference (EMI) is a general type of electric, radio or magnetic interference which is transmitted by conduction or radiation and can be of a very wide frequency range.
Note: The integrated power filtering & surge protection duplex outletwas co-developed with SurgeX, a brand of AMETEK Electronic Systems Protection.

Wiring: The integrated power filtering & surge protection duplex outlet must be connected to a 15 Amp branch circuit. It contains four 14AWG wires - White (Neutral), Black (Line), Green (Box Ground), & Green/Yellow (Isolated Ground).

Note: Installation by a licensed electrician is recommended.

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Accessories
Articles