Steel Foundations: These Sanus
Steel Foundations speaker stands feature heavy gauge steel construction for
extreme rigidity. The twin tubular steel pillars can be filled with sand or shot
for additional mass, if desired. The top plates, twin pillars, and bases all have a black powder-coated finish. The stands can support up to 35 pounds. Note: Each
carton contains two unassembled speaker stands.
Resonance Damping Rings: The
top plates and pillars are separated by self-adhesive cork resonance damping
rings. These rings eliminate speaker resonance from passing through the stands
Top Plate: The rectangular top
plates (8" x 8-1/2") can be mounted to the pillars with either the wide edge or
the narrow edge facing the front. The top plates feature holes on each
corner to accommodate the supplied neoprene rubber pads or brass studs for
Foundation Mount: Some speakers
have a threaded insert in the bottom of the cabinet to accommodate the Sanus
Foundation Mount. These stands have a hole in the center of the top base and
include a 5/8" Allen-head bolt for securely attaching these bolt-mounted
speakers to the stand.
Base: The base is made of heavy
10-gauge steel. Its extra large size provides superior stability on any surface.
The feet have threaded inserts to allow you to use adjustable isolation spikes
(for use on a carpet floor) or rubber feet. Warning: The isolation spikes
are very sharp, and will scratch floors or furniture.
Wire Guides: The stand is
equipped with plastic guides at the bottom and top to keep your speaker wire
Dimensions: The overall
dimensions of the assembled stand is: Width=14-5/8", Height=21", Depth=11-5/8".
When the supplied stand accessories (spikes, rubber feet, isolation studs) are
attached, the following amounts should be added to the height measurement:
- Rubber Feet (for base and/or
top plate): add 3/16" each
- Top Plate Brass Isolation
Studs: add 3/8"
- Base Isolation Spikes: add
1" to 1-1/4"
Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.