Skip Navigation

Sanus VLF311-B1

Super-slim full-motion wall mount for flat-panel TVs 37"-65"

4 Reviews

Item # 051VLF311

This item is no longer available.

Shop all TV Wall Mounts


Our take on the Sanus VLF311-B1

Sanus' ultra-thin VisionMount® VMFL311-B1 holds your large flat-panel LCD or plasma TV just 1-1/4" from the wall when fully retracted. Just pull on the mount and it smoothly extends outwards up to 11".

Sanus' ultra-thin VisionMount® VMFL311-B1 holds your large flat-panel LCD or plasma TV just 1-1/4" from the wall when fully retracted. Just pull on the mount and it smoothly extends outwards up to 11".

The mount's decorative cover conceals the assembly and hardware, giving it a finished appearance that compliments your display. Cable guides keep wires organized and out of sight without interfering with motion of the extending arm.

This durable heavy-gauge steel mount supports a TV with a screen size up to 65" and weighing up to 120 lbs. The mount's brackets can easily be shifted to the right or left, in case the wall studs are a little off-center.

Will this mount work with my TV?
Use the Sanus MountFinder™ to see a list of mounts that work with your specific TV.

Where do I drill the holes?
Tell the Sanus HeightFinder™ Installation Assistant how high you want your TV, and it tells you exactly where to drill.

Product Highlights:

  • fits most flat-panel plasma and LCD TVs with screen sizes from 37"-65"
  • heavy-gauge steel construction with powder-coated finish
  • supports up to 120 lbs.
  • mount holds TV approximately 1-1/4"-11-3/16" from wall
  • extends outward up to 11"
  • decorative cover to conceal assembly and mounting hardware
  • stud-mounting required
  • movable brackets for off-center stud placement
  • includes all necessary hardware
  • bracket: 33-5/8"W x 22-5/16"H x 1-1/4"D
  • warranty: 10 years
  • Our 60-day money-back guarantee

What's in the Box:

  • Upper horizontal bracket
  • Lower horizontal bracket
  • 2 Vertical brackets
  • Wall plate assembly
  • 2 Wall plate covers (upper and lower)
  • Wall plate template
  • 4 End caps
  • Wire management assembly
  • 4 Short spacers (14mm)
  • 4 Long spacers (24mm)
  • 4 Shoulder washers
  • 1/8" Hex key
  • M3 Hex key
  • 3/16" Hex key
  • Slide lock
  • 2 Short countersunk screws
  • 8 Long countersunk screws
  • 6 Hex-head locking screws
  • 4 Screw anchors
  • 4 Lag bolts (5/16" x 2-3/4")
  • 4 Washers (for lag bolts)
  • 4 M4/M5 washers
  • 4 M6/M8 washers
  • 4 M4 x 12mm bolts
  • 4 M4 x 30mm bolts
  • 4 M4 x 40mm bolts
  • 4 M5 x 12mm bolts
  • 4 M5 x 30mm bolts
  • 4 M5 x 40mm bolts
  • 4 M6 x 14mm bolts
  • 4 M6 x 25mm bolts
  • 4 M6 x 40mm bolts
  • 4 M8 x 16mm bolts
  • 4 M8 x 25mm bolts
  • 4 M8 x 45mm bolts
  • Instruction Manual (Eng / Fren / Span / +14 other languages)

Very pleased with this purchase. Was a breeze to set up and the TV looks slim great on the wall.

O Rueda, Flower Mound, TX


Sanus VLF311-B1 Reviews

Average Customer Review(s):

(4 Reviews)

Great buy

O Rueda from Flower Mound, TX on 9/2/2012

Crutchfield Customer Review (What's this?)

Very pleased with this purchase. Was a breeze to set up and the TV looks slim great on the wall.



Not Happy with this wall mount

Anonymous from Fairhope, AL on 4/13/2011

Crutchfield Customer Review (What's this?)

This wall mount is easy to install, the problem is that when the TV is pulled away from the wall , the mount flexes enough to cause the TV to hang unlevel and there is no adjustment to correct for this. It would be really nice to have some sort of way to adjust the level of the TV once it is hung and attached to the wall mount. I had to take the TV down and redrill my wall holes and fight with the thing to finally get it to hang level and it was a real pain.



Sanus VLF311-B1

PatrickJ from Illinois on 3/23/2011

Crutchfield Customer Review (What's this?)

Well made product overall. Didn't have enough lateral travel to allow for offset mounting on 24 inch center studs, so be careful in choosing for those applications. Should be fine for 16 inch centers, however.



The perfect mount

Mike from Warrington, PA on 3/20/2011

Crutchfield Customer Review (What's this?)

The mount is perfect for folks that want flexibility and the ability to push their TVs flat against the wall for a snug fit. The mount provides tilting and flexibility for positioning if not sitting straight on to the TV. The item was easy to install. I mounted it to a Samsung PN50c7000 Plasma with no problems. My only recommendation is Samsung has mounting rings that will provide better spacing then the min height spacer provides by Sanus. If you try to balance the brackets spacing top/bottom and side to side, the screw heads on the back of tv interfere with the bracket clearance holes. Thus you need to raise the brackets to clear the screw heads and to allow easy movement of the power cord. Overall the bracket was easy to install and very reliable.




Hands-on research

Product Research


Overview: The Sanus VisionMount VLF311 is designed to wall mount most large flat panel TVs from 37" to 65" and up to a 120 pounds. This full motion mount allows you to easily aim the TV for viewing virtually anywhere in the room. It has an integrated cable management system for a clean look. The mount is ultra slim, placing the TV only 1-1/4" from the wall.

Construction: The wall-mount bracket is made from solid heavy-gauge steel, with a durable powder coated black finish. It comes with a decorative cover to hide assembly and mounting hardware for a finished appearance.

Bolt Pattern and VESA: The vertical brackets that attach to the TV can accommodate vertical hole spacing (on the back of the TV) between 25mm and 420mm. The horizontal brackets can be adjusted to accommodate a horizontal hole spacing on the back of the TV from 146mm to 730mm. The VLF311 comes with M4, M5, M6, and M8 size bolts to mount the brackets to your TV. For TVs with curved rear panels, an assortment of spacers is included for proper mounting. Given the range of motion, the mount will accommodate the following VESA (Video Electronics Standards Association) mounting hole patterns:

  • 200mm x 100mm, 200mm x 200mm
  • 300mm x 200mm, 300mm x 300mm
  • 400mm x 200mm, 400mm x 300mm, 400mm x 400mm
  • 500mm x 400mm
  • 600mm x 400mm

Full Motion: Once the TV is mounted, the fingertip tilting technology provides smooth tilting with the touch of a finger. The VLF311 can extend out to 11.17", tilt from 0° to -10°, and swivel up to +/- 33°. You can also laterally shift the TV along the wall plate for ideal placement. When you have positioned the TV, you can lock the mount into place to prevent further movement.

Cable Management: The VLF311 has a cable management system to keep loose cables organized for a clean appearance without compromising TV movement.

Wall Mounting: The wall plate must be mounted to a wood wall stud (16" to 24" on center) or a solid concrete or concrete block wall. It is not designed for use in metal stud walls. The wall must be capable of supporting five times the weight of the TV and mount combined. Tools required for mounting include: a Phillips-head screwdriver, 1/2" socket wrench, electric drill, 7/32" drill bit (for wood studs), and 3/8" masonry bit (for concrete or block). To properly position the mount, you'll likely need a pencil, awl, level, tape measure, hammer, and stud finder as well.


  • Wall Plate: Width = 31.35", Height = 13.5" (attached vertical face plate height is 20.875"), Depth = 1.24"
  • Mounting Bracket Assembly: Width = 33.36", Height = 22.3"

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.