Skip Navigation

Sanus VLF320-B1

Super-slim full-motion wall mount with articulating arm for flat-panel TVs 51"-70"

12 Reviews | 2 questions - 3 answers

Overview

Our take on the Sanus VLF320-B1

Sanus' ultra-thin VisionMount® VLF320-B1 holds your medium-sized or large flat-panel TV just 1-1/4" from the wall when fully retracted. Just pull on the mount and it smoothly extends outward up to 20".

Sanus' ultra-thin VisionMount® VLF320-B1 holds your medium-sized or large flat-panel TV just 1-1/4" from the wall when fully retracted. Just pull on the mount and it smoothly extends outward up to 20".

The mount's decorative cover conceals the assembly and hardware, giving it a finished appearance that complements your TV. An integrated cable management system keeps wires organized and out of sight without interfering with the motion of the extending arm.

This durable heavy-gauge steel mount supports a TV with a screen size up to 70" and weighing up to 120 lbs. The mount's brackets can easily be shifted to the right or left, in case the wall studs are a little off-center. And you can make fine adjustments after installation to keep your TV leveled.

Will this mount work with my TV?

Use the Sanus MountFinder™ to see a list of mounts that work with your specific TV.

Where do I drill the holes?

Tell the Sanus HeightFinder™ Installation Assistant how high you want your TV, and it tells you exactly where to drill.

Great for hanging your TV over your fireplace. I purchased this Sanus wall mount bracket to accomodate an access panel for the gas valve shutoff as per the building code. When the wall mount is retracted the gas valve access panel is hidden completely.

Bill F., Queens, NY

What's in the Box:

  • Articulating TV wall-mount assembly
  • 2 Vertical brackets
  • Wall-mount plate
  • 4 End caps
  • 2 Click caps
  • Four M4x12mm screws
  • Four M4x30mm screws
  • Four M6x14mm screws
  • Four M6x40mm screws
  • Four M8x16mm screws
  • Four M4 washers
  • Four M6/M8 washers
  • Four 14mm spacers
  • Four 24mm spacers
  • Eight M4x10mm screws
  • Eight 1/4"-20x1/2" screws
  • Two M4x30mm screws
  • Four 5/16"x2-3/4" lag-bolts
  • 4 Lag-bolt washers
  • 4 Wall-anchors
  • 4 Cable covers
  • 2 Wall-plate covers
  • 4 Self-adhesive pads
  • 2 Wire-ties
  • M3 Hexkey
  • 5/32" Hexkey
  • Wall-plate template
  • Instruction Manual

Product Highlights:

  • fits most flat-panel TVs with screen sizes from 51"-70"
  • heavy-gauge steel construction with powder-coated finish
  • supports up to 120 lbs.
  • mount holds TV approximately 1-1/4"-20" from wall
  • decorative cover to conceal assembly and mounting hardware
  • stud-mounting required
  • post-install leveling adjustments
  • includes all necessary hardware
  • bracket: 33-5/8"W x 22-5/16"H x 1-1/4"D
  • warranty: 10 years
  • Our 60-day money-back guarantee
Reviews

Sanus VLF320-B1 Reviews

Average Customer Review(s):

(12 Reviews)
rewards card

Submit a review and enter to win a $350 rewards card

Review this product

Thanks for submitting your review

Most reviews are processed and published within 5 business days. You will receive a confirmation email once your review has been published.

Your Review

Use the stars below to rate the overall product on a scale of 1-5
1500
Upload your photos

Not visible. Email associated with order.
(e.g., Charlottesville, VA)

Additional Fields (optional)

500
500

By submitting this review, you agree to our terms and review guidelines.

Filter by rating

Customer photos


<< >>
Details

Hands-on research

Product Research

Features

Overview: The Sanus VisionMount VLF320 is a super-slim, full-motion wall-mount for large flat-panel TVs and monitors. This full-motion mount allows you to easily aim the TV for viewing virtually anywhere in the room. The mount can tilt, swivel, and extend in every direction so you can attain the perfect viewing angle. This mounting bracket, black in color, features a built-in cable management system to conceal and protect your cables. The mount is ultra slim, placing your TV only 1.25" from the wall, but can extend up to 20.8125".

Construction: The wall-mount bracket is made from solid heavy-gauge steel, with a durable powder coated black finish. It comes with a decorative cover to hide assembly and mounting hardware for a finished appearance.

Capacity: The VisionMount VLF320 is designed for 51" to 70" flat-panel TVs. It has a maximum weight capacity of up to 120 lbs.

Bolt Pattern and VESA: The vertical brackets that attach to the TV can accommodate vertical hole spacing (on the back of the TV) between 25mm and 420mm. The horizontal brackets can be adjusted to accommodate a horizontal hole spacing on the back of the TV from 146mm to 730mm. The VLF320 comes with M4, M5, M6, and M8 size bolts to mount the brackets to your TV. For TVs with curved rear panels, an assortment of spacers is included for proper mounting. Given the range of motion, the mount will accommodate the following VESA (Video Electronics Standards Association) mounting hole patterns:

  • 200mm x 100mm, 200mm x 200mm
  • 300mm x 200mm, 300mm x 300mm
  • 400mm x 200mm, 400mm x 300mm, 400mm x 400mm
  • 500mm x 400mm
  • 600mm x 400mm
Note: Additional hardware may be required for your specific model of TV. For example; shorter or longer screws, thicker or slimmer washers or spacers. These additional accessories can often be found at your local hardware store.

Full-Motion w/ Fingertip Tilting Technology: You can laterally shift the TV along the wall plate for ideal placement. Fingertip tilting technology provides smooth tilting with the touch of a finger from 0° to -10°. The VLF320 can sit as close as 1.25" from the wall or extend out from the wall up to 20.8125". You can also swivel the wall-mount up to +/- 33°. When you have positioned the TV where you want it, you can lock the mount into place to prevent further movement.

Post-Installation Level Adjustment: Post-installation level adjustment allows the TV to "roll" up to 1.5º clockwise and counterclockwise to ensure it is perfectly level, and lateral shift ability makes it easy to center the TV on the wall, even with off-center studs.

Cable Management: With its integrated cable management system, the VLF320 keeps loose cables organized and concealed within the extension arm for a clean appearance without compromising TV motion.  A decorative cover also conceals assembly and mounting hardware.

Wall Mounting: The wall plate must be mounted to a wood wall stud (16" to 24" on center) or a solid concrete or concrete block wall. It is not designed for use in metal stud walls. The wall must be capable of supporting five times the weight of the TV and mount combined. Tools required for mounting include: a Phillips-head screwdriver, 1/2" socket wrench, electric drill, 7/32" drill bit (for wood studs), and 3/8" masonry bit (for concrete or block). To properly position the mount, you'll likely need a pencil, awl, level, tape measure, hammer, and stud finder as well.

Dimensions:

  • Wall Plate: Width = 31.5", Height = 13.1875". Depth = 0.875"
  • TV Bracket Assembly: Width = 32.1875", Height = 19.6875", Depth = 1.25"-20.8125"
  • Vertical Brackets: Width = 1.4375", Height = 20.125", Depth = 1.0"

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Accessories
Q & A

Customer Q&A

Crutchfield asked  
Why did you buy this?

Based on tech specs [ SERGEY  Feb 16, 2017 ]
I'm hoping that the wall bracket will fit the 10 " logs of my home's side wall [ ROBERT G  Jan 02, 2017 ]
Reviews [ fred  Sep 02, 2016 ]
Recommended by professional installer [ Michael  Jul 21, 2016 ]
Full motion but slim. [ DJ Patrick  Jun 15, 2016 ]
Lowest profile w/ full motion on the market [ Michael  Jun 12, 2016 ]
Its the only one that worked with the Samsung TV I had... plus, it telescopes... [ Osman  Mar 15, 2016 ]
slim design and compatibility with the sony tv. [ Dr. Craig  Dec 26, 2015 ]

2 questions already asked

John, We purchased this mount in April of this year for our 65" flatscreen. The TV feels secure and solid while using the multi motion. Also, the TV is close to the wall when pushed all the way back. Lastly, everything that was supposed to be in the box was in the box and everything Sanus includes made the installation a breeze. [ william  Jun 22, 2015 ]
Yes it will but the single arm mount works better. [ RICHARD  Jun 04, 2015 ]
Yes, I have it as the wall mount for my curved Samsung 4K 3D 65 inch tv. [ ELIAS  Jun 01, 2015 ]
Articles

Searches related to the Sanus VLF320-B1 Super-slim full-motion wall mount with articulating arm for flat-panel TVs 51"-70"